CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140 Motor Grader LVR
    View Product
    24 Motor Grader
    View Product Remove
    160 Motor Grader
    View Product Remove
    140 GC Motor Grader
    View Product Remove

    Engine
    Net Power - EEC 80/1269 250 HP 535 HP - -
    Net Power - ISO 9249/SAE J1349 250 HP - - -
    Standard Capability 109 °F 122 °F 109 °F 109 °F
    Engine RPM 2,000 - - 2,200
    Engine Model Cat C9.3 Cat C27 Cat® C9.3 Cat 7.1
    Bore 4.5 in 5.4 in 4.5 in 4.1 in
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V
    Displacement 567.5 in³ 1648 in³ 567.5 in³ 427.8 in³
    Stroke 5.9 in 6 in 5.9 in 5.3 in
    Number of Cylinders 6 12 6 6
    Torque Rise - ISO 9294 44% - - 40%
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
    Note (3) - Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Power as declared per ISO 14396
    Note (2) - Optimized VHP Plus is standard for the 24. - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) - -
    Base Power (1st Gear) - Net - - 221 HP -
    Speed at Rated Power - - 2,000 rpm -
    VHP Plus - Gear - Net Power - Forward 1st - - 221 HP -
    Torque Rise - - 39% -
    VHP Plus - Gear - Net Power - Forward 8th - - 272 HP -
    VHP Plus - Gear - Net Power - Forward 3rd - - 241 HP -
    VHP Plus - Gear - Net Power - Forward 4th - - 252 HP -
    VHP Plus - Gear - Net Power - Forward 2nd - - 231 HP -
    VHP Plus - Gear - Net Power - Forward 6th - - 262 HP -
    Maximum Torque - VHP Plus - - 1000 lb/ft -
    VHP Plus Range - Net - - 165-203 kW (221-272 hp) -
    VHP Plus - Gear - Net Power - Forward 7th - - 267 HP -
    VHP Plus - Gear - Net Power - Reverse 1st - - 221 HP -
    Base Power (1st Gear) - Net - Metric - - 224 HP -
    High Ambient - Fan Speed - Standard - - 1,400 rpm -
    VHP Plus - Gear - Net Power - Forward 5th - - 257 HP -
    VHP Plus - Gear - Net Power - Reverse 2nd - - 231 HP -
    VHP Plus Range - Net - Metric - - 165-203 kW (224-276 hp) -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th - - 241 HP -
    Derating Altitude - - 10000 ft 9842 ft
    High Ambient - Fan Speed - Maximum - - 1,550 rpm -
    High Ambient - Fan Speed - Minimum - - 500 rpm -
    High - Ambient Capability - - 122 °F 122 °F
    Engine Power (ISO 14396) - - - 196 HP
    Maximum Torque - ISO 9249 - - - 616 lb/ft
    Engine Power AWD (ISO 14396) - - - 196 HP

    Weights
    Operating Weight - Typically Equipped 20236 lb 165314 lb 45547 lb 38912 lb
    Gross Vehicle Weight - Maximum - Rear Axle - - 38069 lb -
    Gross Vehicle Weight - Base - Front Axle - - 9907 lb -
    Gross Vehicle Weight - Base - Rear Axle - - 28812 lb -
    Gross Vehicle Weight - Maximum - Total - - 55144 lb -
    Operating Weight - Typically Equipped - Front Axle - - 13237 lb -
    Gross Vehicle Weight - Base - Total - - 38719 lb -
    Gross Vehicle Weight - Maximum - Front Axle - - 17075 lb -
    Operating Weight - Typically Equipped - Total - - 45547 lb -
    Operating Weight - Typically Equipped - Rear Axle - - 32310 lb -
    Note - - - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.

    Moldboard
    Blade Width 12 ft 24 ft 14 ft 12 ft
    Cutting Edge 6 in - - -
    Arc Radius 16.3 in - 16.3 in 16.3 in
    Throat Clearance 6.5 in - 6.5 in 4.4 in
    End Bit 6 in - - 6 in
    Blade Height - 40 in - 24 in
    Moldboard - Height - - 24 in -
    Moldboard - Thickness - - 0.87 in -
    Cutting Edge Width - - 6 in 6 in
    Cutting Edge Thickness - - 0.6 in -
    End Bit - Width - - 6 in -
    End Bit - Thickness - - 0.6 in -
    Blade Pull - Base GVW - - 25931 lb -
    Blade Pull - Maximum GVW - - 34262 lb -
    Blade Down Pressure - Base GVW - - 17004 lb -
    Blade Down Pressure - Maximum GVW - - 29308 lb -
    Moldboard - Blade Width - - 14 ft -

    Dimensions
    Basic Blade Width 140 in - - -
    Length of Machine* 397.6 in - - 406.7 in
    Width 97.6 in - - 95.6 in
    Note *Typically equipped with push block and ripper. - - *Typically equipped with push block and ripper.
    Maximum Height 132 in - - 132.4 in
    Height - Top of Cab - - 130 in -
    Length - Counterweight to Ripper - - 399 in -
    Width - Outside Front Tires - - 98.9 in -
    Length - Front Axle to Mid Tandem - - 241 in -
    Length - Front Tire to Rear of Machine - - 351 in -
    Length - Front Axle to Moldboard - - 100 in -
    Length - Between Tandem Axles - - 60 in -
    Width - Outside Rear Tires - - 98.9 in -
    Width - Tire Center Lines - - 84.3 in -
    Height - Front Axle Center - - 23.5 in -
    Height - Exhaust Stack - - 128 in -
    Height - Top of Cylinders - - 120 in -
    Ground Clearance - Rear Axle - - 13.3 in -
    Width All Wheel Drive (AWD) - - - 99.3 in

    Service Refill
    Hydraulic System 14.5 gal (US) - - -
    Engine Crankcase 7.9 gal (US) - - -
    Circle Drive 1.8 gal (US) - - -
    Fuel Tank 100 gal (US) - - -
    Front Wheel Spindle Bearing - Each 0.13 gal (US) - - -
    Fuel Capacity - - 104 gal (US) -
    Cooling System - - 15 gal (US) -
    Hydraulic System - Total - - 26.4 gal (US) -
    Hydraulic System - Tank - - 16.9 gal (US) -
    Transmission - Differential - Final Drives - - 18.5 gal (US) -
    Diesel Exhaust Fluid - - 5.8 gal (US) -
    Engine Oil - - 7.9 gal (US) -
    Tandem Housing - Each - - 22.9 gal (US) -
    Front Wheel Spindle Bearing Housing - - 0.13 gal (US) -
    Circle Drive Housing - - 1.8 gal (US) -

    Machine Weight
    Note *Typically equipped with push block and ripper. - - -
    All-Wheel Drive (AWD) Weight 44613 lb - - -
    Weight* 42325 lb 161695 lb - -

    Blade Range
    Maximum Lift Above Ground 18.9 in 16.1 in 17.8 in 18.7 in
    Maximum Depth of Cut 28.9 in 21.7 in 29.5 in 28.1 in
    Circle Centershift - Right - - 28.7 in -
    Circle Centershift - Left - - 27.4 in -
    Moldboard Sideshift - Right - - 26 in -
    Moldboard Sideshift - Left - - 20.1 in -
    Maximum Blade Position Angle - - 90° -
    Blade Tip Range - Forward - - 40° -
    Blade Tip Range - Backward - - 5° -
    Maximum Shoulder Reach Outside of Tires - Left - - 82.3 in -
    Maximum Shoulder Reach Outside of Tires - Right - - 89.7 in -
    Circle Center Shift Left - - - 29.6 in
    Circle Center Shift Right - - - 28.7 in
    Maximum Shoulder Reach Left - - - 74.3 in
    Maximum Shoulder Reach Right - - - 71.3 in
    Moldboard Side Shift Left - - - 25.6 in
    Moldboard Side Shift Right - - - 20.7 in
    Blade Tip Range Backward - - - 5
    Blade Tip Range Forward - - - 40

    Operating Specifications
    Top Speed - Forward - - 29.5 mile/h -
    Top Speed - Reverse - - 23.3 mile/h -
    Turning Radius - Outside Front Tires - - 25.59 ft -
    Steering Range - Left/Right - - 50° -
    Articulation Angle - Left/Right - - 20° -
    Forward - 1st - - 2.6 mile/h -
    Forward - 2nd - - 3.5 mile/h -
    Forward - 3rd - - 5.1 mile/h -
    Forward - 4th - - 7 mile/h -
    Forward - 5th - - 10.8 mile/h -
    Forward - 6th - - 14.7 mile/h -
    Forward - 7th - - 20.3 mile/h -
    Forward - 8th - - 29.5 mile/h -
    Reverse - 1st - - 2 mile/h -
    Reverse - 2nd - - 3.8 mile/h -
    Reverse - 3rd - - 5.5 mile/h -
    Reverse - 4th - - 8.5 mile/h -
    Reverse - 5th - - 16 mile/h -
    Reverse - 6th - - 23.3 mile/h -

    Power Train
    Forward/Reverse Gears - - 8 Forward/6 Reverse -
    Transmission - - APECS, Direct Drive, Powershift -
    Brakes - Service - - Multiple Oil Disc -
    Brakes - Service - Surface Area - - 3565 in² -
    Brakes - Parking - - Multiple Oil Disc -
    Brakes - Secondary - - Dual Circuit Control -

    Hydraulic System
    Circuit Type - - Parallel -
    Pump Type - - Variable Piston -
    Pump Output - - 55.5 gal/min -
    Maximum System Pressure - - 3503 psi -
    Reservoir Tank Capacity - - 16.9 gal (US) -
    Standby Pressure - - 885 psi -

    Frame
    Drawbar - Width - - 3 in -
    Circle - Diameter - - 61.1 in -
    Circle - Blade Beam Thickness - - 1.6 in -
    Drawbar - Height - - 6 in -
    Front Frame Structure - Width - - 12 in -
    Circle - Height - - 6.3 in -
    Front Frame Structure - Height - - 12.6 in -
    Drawbar - Thickness - - 0.5 in -
    Front-Top/Bottom Plate - Width - - 12 in -
    Front-Top/Bottom Plate - Thickness - - 0.87 in -
    Front Axle - Height to Center - - 23.5 in -
    Front Axle - Wheel Lean - Left/Right - - 18° -
    Front Axle - Total Oscillation per Side - - 32° -

    Ripper
    Ripping Depth - Maximum - - 16.8 in -
    Ripper Shank Holder Spacing - - 21 in -
    Ripper Shank Holders - - 5 -
    Penetration Force - - 20812 lb -
    Pry-Out Force - - 28493 lb -
    Machine Length Increase, Beam Raised - - 40.6 in -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing - - 4.6 in -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum - - 18.4 in -
    Mid, V-Type - Working Width - - 46.6 in -
    Rear - Scarifying Depth, Maximum - - 16.8 in -
    Front, V-Type - Working Width - - 47.4 in -
    Mid, V-Type - Scarifier Shank Holder Spacing - - 4.6 in -
    Mid, V-Type - Scarifying Depth, Maximum - - 11.5 in -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders - - 5/11 -
    Front, V-Type, 5 or 11 Tooth - Working Width - - 40.6 in -
    Mid, V-Type - Scarifier Shank Holders - - 11 -
    Rear - Working Width - - 84 in -
    Rear - Scarifier Shank Holders - - 9 -
    Rear - Scarifier Shank Holder Spacing - - 10.5 in -

    Standards
    Brakes - - ISO 3450 -
    ROPS/FOPS - - ISO 3471; ISO 3449 -
    Steering - - ISO 5010 -
    Sound - - ISO 6394; ISO 6395 -

    Air Conditioning System
    Air Conditioning - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -
    Note - - - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

    Tandems
    Height - - 22.5 in -
    Width - - 8 in -
    Sidewall Thickness - Inner - - 0.69 in -
    Sidewall Thickness - Outer - - 0.71 in -
    Drive Chain Pitch - - 2 in -
    Wheel Axle Spacing - - 60 in -
    Tandem Oscillation - Front Up - - 15° -
    Tandem Oscillation - Front Down - - 25° -

    Service Refill Capacities
    Fuel Tank - - - 78 gal (US)
    Circle Drive with Slip Clutch - - - 2 gal (US)
    Circle Drive without Slip Clutch - - - 0.5 gal (US)
    Cooling System - - - 40 l
    Engine Crankcase - - - 5.5 gal (US)
    Diesel Exhaust Fluid Tank (Tier 4 Only) - - - 4.2 gal (US)
    Hydraulic System - - - 11.9 gal (US)
    Transmission - - - 4.8 gal (US)

    Weight
    Weight (Tier 4 Final)** - - - 40488 lb
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - - - 42119 lb
    All-Wheel Drive Weight (AWD) (Stage V)* - - - 40543 lb
    Weight (Stage V)* - - - 38912 lb
    Add a Similar Product: