|
|
|
|
Engine |
| Net Power - EEC 80/1269 |
250 hp |
535 hp |
- |
| Net Power - ISO 9249/SAE J1349 |
250 hp |
- |
130 hp |
| Standard Capability |
109 °F |
122 °F |
122 °F |
| Engine RPM |
2,000 |
- |
2,000 |
| Engine Model |
Cat C9.3 |
Cat C27 |
Cat 7.1 |
| Bore |
4.5 in |
5.4 in |
4.1 in |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II |
U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA |
| Displacement |
567.5 in³ |
1648 in³ |
427.8 in³ |
| Stroke |
5.9 in |
6 in |
5.3 in |
| Number of Cylinders |
6 |
12 |
6 |
| Torque Rise - ISO 9294 |
44% |
- |
42% |
| Note (1) |
- |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." |
| Note (3) |
- |
Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Power as declared per ISO 14396 |
| Note (2) |
- |
Optimized VHP Plus is standard for the 24. |
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (4) |
- |
Power as declared per ISO 14396. Rated rpm 1,800 (561 hp) |
- |
| Derating Altitude |
- |
- |
9842.5 ft |
| Maximum Torque - ISO 9249 |
- |
- |
606 lb/ft |
| Net Power Range (Tier 3) |
- |
- |
130 hp |
| Maximum Torque - AWD On |
- |
- |
611 lb/ft |
| Derating Altitude (AWD) |
- |
- |
5499 ft |
| All-Wheel Drive Net Power Range (Tier 4) |
- |
- |
174 kW |
Weights |
| Operating Weight - Typically Equipped |
44613 lb |
165314 lb |
35067 lb |
Moldboard |
| Blade Width |
12 ft |
24 ft |
12 ft |
| Cutting Edge |
6 in |
- |
6 in |
| Arc Radius |
16.3 in |
- |
16.3 in |
| Throat Clearance |
6.5 in |
- |
4.1 in |
| End Bit |
6 in |
- |
6 in |
| Blade Height |
- |
40 in |
24 in |
Air Conditioning System |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system con |
Dimensions |
| Basic Blade Width |
140 in |
- |
12 ft |
| Length of Machine* |
397.6 in |
- |
387 in |
| Width |
97.6 in |
- |
102 in |
| Note |
*Typically equipped with push block and ripper. |
- |
*Typically equipped with push block and ripper. |
| Maximum Height |
132 in |
- |
136.4 in |
| Width All Wheel Drive (AWD) |
- |
- |
2551 mm |
Service Refill |
| Hydraulic System |
14.5 gal (US) |
- |
- |
| Engine Crankcase |
7.9 gal (US) |
- |
- |
| Circle Drive |
1.8 gal (US) |
- |
- |
| Fuel Tank |
100 gal (US) |
- |
- |
| Front Wheel Spindle Bearing - Each |
0.13 gal (US) |
- |
- |
Machine Weight |
| Note |
*Typically equipped with push block and ripper. |
- |
- |
| All-Wheel Drive (AWD) Weight |
44613 lb |
- |
- |
| Weight* |
- |
161695 lb |
- |
| Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 |
- |
- |
36731 lb |
| Note (1) |
- |
- |
*Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. |
| Joystick Weight* Tier 4 |
- |
- |
35358 lb |
| Lever/Steering Wheel Weight* Tier 4 |
- |
- |
35067 lb |
| Joystick All-Wheel Drive (AWD) Weight* Tier 4 |
- |
- |
36846 lb |
Blade Range |
| Maximum Lift Above Ground |
18.9 in |
16.1 in |
16.1 in |
| Maximum Depth of Cut |
28.9 in |
21.7 in |
30.5 in |
| Blade Tip Range Forward |
- |
- |
40 |
| Maximum Shoulder Reach Right |
- |
- |
76 in |
| Moldboard Side Shift Right |
- |
- |
26.1 in |
| Maximum Shoulder Reach Left |
- |
- |
69.4 in |
| Moldboard Side Shift Left |
- |
- |
20.1 in |
| Circle Center Shift Left |
- |
- |
26 in |
| Blade Tip Range Backward |
- |
- |
5 |
| Circle Center Shift Right |
- |
- |
26 in |
Service Refill Capacities |
| Transmission and Differential |
- |
- |
9 gal (US) |
| Circle Drive |
- |
- |
1.8 gal (US) |
| Fuel Tank |
- |
- |
65 gal (US) |
| Cooling System |
- |
- |
14 gal (US) |
| Engine Crankcase |
- |
- |
4.8 gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) |
- |
- |
5 gal (US) |
| Hydraulic System |
- |
- |
25.6 gal (US) |
