CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    14 Motor Grader
    View Product Remove
    150 Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 HP - 200 HP
    Engine Model Cat® C9.3 Cat C13 Cat® C9.3
    Bore 4.5 in 5.1 in 4.5 in
    Stroke 5.9 in 6.2 in 5.9 in
    Speed at Rated Power 2,000 rpm 1,850 rpm 2,000 rpm
    Standard Capability 109 °F 122 °F 109 °F
    Maximum Torque - VHP Plus 840 lb/ft 1137 lb/ft 920 lb/ft
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 HP - 220 HP
    VHP Plus - Gear - Net Power - Forward 2nd 189 HP - 210 HP
    VHP Plus - Gear - Net Power - Forward 5th 215 HP - 236 HP
    VHP Plus - Gear - Net Power - Forward 3rd 200 HP - 220 HP
    VHP Plus - Gear - Net Power - Forward 8th 231 HP - 252 HP
    Torque Rise 38% 41% 39%
    VHP Plus - Gear - Net Power - Reverse 2nd 189 HP - 210 HP
    VHP Plus - Gear - Net Power - Forward 1st 179 HP - 200 HP
    VHP Plus - Gear - Net Power - Forward 6th 220 HP - 241 HP
    VHP Plus - Gear - Net Power - Reverse 1st 179 HP - 200 HP
    VHP Plus Range - Net 133-172 kW (179-231 hp) - 149-188 kW (200-252 hp)
    Emissions U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent U.S. EPA Tier 4 Final/EU Stage V
    VHP Plus - Gear - Net Power - Forward 7th 225 HP - 247 HP
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) - 149-188 kW (202-255 hp)
    VHP Plus - Gear - Net Power - Forward 4th 210 HP - 231 HP
    Base Power (1st Gear) - Net - Metric 181 HP - 202 HP
    High Ambient - Fan Speed - Standard 1,400 rpm - 1,400 rpm
    Displacement 567.5 in³ 763 in³ 567.5 in³
    Number of Cylinders 6 6 6
    Derating Altitude 10000 ft - 10000 ft
    High Ambient - Fan Speed - Maximum 1,550 rpm - 1,550 rpm
    High Ambient - Fan Speed - Minimum 500 rpm - 500 rpm
    High - Ambient Capability 122 °F - 122 °F
    Base Power (1st Gear) - Net - 238 HP -
    Note (3) - Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) - Optimized VHP Plus is standard for the 14M3. -
    Maximum Altitude - Full Power - 13900 ft -
    Maximum Altitude - Full Power (Tier 3) - 14349 ft -
    Maximum Altitude - Full Power (Tier 2) - 12049 ft -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. -
    Standard - Fan Speed - Minimum - 550 rpm -
    Note (4) - Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) -
    Note (5) - Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. -
    Standard - Fan Speed - Maximum - 1,600 rpm -

    Weights
    Operating Weight - Typically Equipped 42647 lb 57250 lb 43950 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - 17075 lb
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - 38069 lb
    Operating Weight - Typically Equipped - Front Axle 12055 lb - 12549 lb
    Operating Weight - Typically Equipped - Rear Axle 30592 lb - 31401 lb
    Gross Vehicle Weight - Base - Front Axle 9343 lb - 9601 lb
    Gross Vehicle Weight - Base - Rear Axle 28077 lb - 28590 lb
    Gross Vehicle Weight - Maximum - Total 55144 lb - 55144 lb
    Gross Vehicle Weight - Base - Total 37420 lb - 38191 lb
    Operating Weight - Typically Equipped - Total 42647 lb - 43950 lb
    Gross Vehicle Weight - Base* - Total - 50980 lb -
    Gross Vehicle Weight - Base* - Front Axle - 13994 lb -
    Gross Vehicle Weight - Typically Equipped - Total - 57250 lb -
    Gross Vehicle Weight - Typically Equipped - Rear Axle - 42005 lb -
    Gross Vehicle Weight - Typically Equipped - Front Axle - 15245 lb -
    Gross Vehicle Weight - Base* - Rear Axle - 36994 lb -
    Note - *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. -

    Moldboard
    Blade Width 12 ft 14 ft 12 ft
    Moldboard - Height 24 in - 24 in
    Moldboard - Thickness 0.87 in - 0.87 in
    Arc Radius 16.3 in 16.3 in 16.3 in
    Throat Clearance 6.5 in 4.6 in 6.5 in
    Cutting Edge Width 6 in - 6 in
    Cutting Edge Thickness 0.6 in - 0.6 in
    End Bit - Width 6 in - 6 in
    End Bit - Thickness 0.6 in - 0.6 in
    Blade Pull - Base GVW 25269 lb - 25732 lb
    Blade Pull - Maximum GVW 34262 lb - 34262 lb
    Blade Down Pressure - Base GVW 16038 lb - 16480 lb
    Blade Down Pressure - Maximum GVW 29309 lb - 29308 lb
    Moldboard - Blade Width 12 ft - 12 ft
    Blade Width - With End Bits - 169 in -
    Blade Height - With Cutting Edge - 24.9 in -
    Blade Width - Without End Bits - 164 in -
    Blade Height - Without Cutting Edge - 23 in -

    Operating Specifications
    Top Speed - Forward 29 mile/h - 29 mile/h
    Top Speed - Reverse 23 mile/h - 23 mile/h
    Turning Radius - Outside Front Tires 25.59 ft - 25.59 ft
    Steering Range - Left/Right 50° - 50°
    Articulation Angle - Left/Right 20° - 20°
    Forward - 1st 2.5 mile/h - 2.5 mile/h
    Forward - 2nd 3.4 mile/h - 3.4 mile/h
    Forward - 3rd 5 mile/h - 5 mile/h
    Forward - 4th 6.9 mile/h - 6.9 mile/h
    Forward - 5th 10.6 mile/h - 10.6 mile/h
    Forward - 6th 14.5 mile/h - 14.5 mile/h
    Forward - 7th 19.9 mile/h - 19.9 mile/h
    Forward - 8th 29 mile/h - 29 mile/h
    Reverse - 1st 2 mile/h - 2 mile/h
    Reverse - 2nd 3.7 mile/h - 3.7 mile/h
    Reverse - 3rd 5.4 mile/h - 5.4 mile/h
    Reverse - 4th 8.4 mile/h - 8.4 mile/h
    Reverse - 5th 15.7 mile/h - 15.7 mile/h
    Reverse - 6th 23 mile/h - 23 mile/h

    Service Refill
    Fuel Capacity 104 gal (US) - 104 gal (US)
    Cooling System 15 gal (US) - 15 gal (US)
    Hydraulic System - Total 26.4 gal (US) - 26.4 gal (US)
    Hydraulic System - Tank 16.9 gal (US) - 16.9 gal (US)
    Diesel Exhaust Fluid 5.8 gal (US) - 5.8 gal (US)
    Transmission - Differential - Final Drives 18.5 gal (US) - 18.5 gal (US)
    Engine Oil 7.9 gal (US) - 7.9 gal (US)
    Tandem Housing - Each 20 gal (US) - 20 gal (US)
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - 0.13 gal (US)
    Circle Drive Housing 1.8 gal (US) - 1.8 gal (US)

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - 8 Forward/6 Reverse
    Transmission APECS, Direct Drive, Powershift - APECS, Direct Drive, Powershift
    Brakes - Service Multiple Oil Disc - Multiple Oil Disc
    Brakes - Service - Surface Area 3565 in² - 3565 in²
    Brakes - Parking Multiple Oil Disc - Multiple Oil Disc
    Brakes - Secondary Dual Circuit - Dual Circuit

    Hydraulic System
    Circuit Type Parallel - Parallel
    Pump Type Variable Piston - Variable Piston
    Pump Output 55.7 gal/min - 55.7 gal/min
    Maximum System Pressure 3500 psi - 3500 psi
    Reservoir Tank Capacity 16.9 gal (US) - 16.9 gal (US)
    Standby Pressure 885 psi - 885 psi

    Frame
    Drawbar - Width 3 in - 3 in
    Circle - Diameter 60.2 in - 60.2 in
    Circle - Blade Beam Thickness 1.6 in - 1.6 in
    Drawbar - Height 6 in - 6 in
    Front Frame Structure - Height 12.6 in - 12.6 in
    Circle - Height 5.4 in - 5.4 in
    Front Frame Structure - Width 12 in - 12 in
    Drawbar - Thickness 0.5 in - 0.5 in
    Front-Top/Bottom Plate - Width 12 in - 12 in
    Front-Top/Bottom Plate - Thickness 0.87 in - 0.87 in
    Front Axle - Height to Center 23.5 in - 23.5 in
    Front Axle - Wheel Lean - Left/Right 18° 17.1° 18°
    Front Axle - Total Oscillation per Side 32° 32° 32°
    Circle - Outer Diameter - 71.7 in -

    Blade Range
    Circle Centershift - Right 28.7 in 20.5 in 28.7 in
    Circle Centershift - Left 27.4 in 25.6 in 27.4 in
    Moldboard Sideshift - Right 26 in 31.1 in 26 in
    Moldboard Sideshift - Left 20.1 in 29.1 in 20.1 in
    Maximum Blade Position Angle 90° - 90°
    Blade Tip Range - Forward 40° 40° 40°
    Blade Tip Range - Backward 5° 5° 5°
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in 78.9 in 77.9 in
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in 73.6 in 70.5 in
    Maximum Lift Above Ground 18.9 in 16.5 in 18.9 in
    Maximum Depth of Cut 28.1 in 23.3 in 28.1 in

    Ripper
    Ripping Depth - Maximum 16.8 in - 16.8 in
    Ripper Shank Holder Spacing 21 in - 21 in
    Ripper Shank Holders 5 - 5
    Penetration Force 20812 lb - 20812 lb
    Pry-Out Force 27794 lb - 27794 lb
    Machine Length Increase, Beam Raised 40.6 in - 40.6 in

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - 18.4 in
    Mid, V-Type - Scarifier Shank Holders 11 - 11
    Rear - Scarifying Depth, Maximum 16.8 in - 16.8 in
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - 40.6 in
    Front, V-Type - Working Width 47.4 in - 47.4 in
    Mid, V-Type - Working Width 46.6 in - 46.6 in
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - 11.5 in
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - 4.6 in
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - 11-May
    Rear - Working Width 84 in - 84 in
    Rear - Scarifier Shank Holders 9 - 9
    Rear - Scarifier Shank Holder Spacing 10.5 in - 10.5 in

    Standards
    Brakes ISO 3450 - ISO 3450
    Sound ISO 6394; ISO 6395 - ISO 6394; ISO 6395
    Steering ISO 5010 - ISO 5010
    ROPS/FOPS ISO 3471/ISO 3449 - ISO 3471/ISO 3449

    Tandems
    Height 19.9 in - 19.9 in
    Width 7.9 in - 7.9 in
    Sidewall Thickness - Inner 0.63 in - 0.63 in
    Sidewall Thickness - Outer 0.71 in - 0.71 in
    Drive Chain Pitch 2 in - 2 in
    Wheel Axle Spacing 60 in - 60 in
    Tandem Oscillation - Front Up 15° - 15°
    Tandem Oscillation - Front Down 25° - 25°

    Dimensions
    Height - Top of Cab 130 in - 130 in
    Length - Counterweight to Ripper 399 in - 399 in
    Width - Outside Front Tires 98.9 in - 98.9 in
    Length - Front Axle to Mid Tandem 241 in - 241 in
    Length - Front Tire to Rear of Machine 351 in - 351 in
    Length - Front Axle to Moldboard 100 in - 100 in
    Length - Between Tandem Axles 60 in - 60 in
    Width - Outside Rear Tires 98.9 in - 98.9 in
    Width - Tire Center Lines 84.3 in - 84.3 in
    Height - Front Axle Center 23.5 in - 23.5 in
    Height - Exhaust Stack 128 in - 128 in
    Height - Top of Cylinders 120 in - 120 in
    Ground Clearance - Rear Axle 13.3 in - 13.3 in

    Service Refill Capacities
    Transmission and Differential - 23.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5.8 gal (US) -
    Hydraulic System - 33 gal (US) -
    Circle Drive - 1.8 gal (US) -
    Cooling System - 15.9 gal (US) -
    Fuel Tank - 109.9 gal (US) -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
    Add a Similar Product: