CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    140 GC Motor Grader
    View Product Remove
    24 Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 HP - -
    Engine Model Cat® C9.3 Cat 7.1 Cat C27
    Bore 4.5 in 4.1 in 5.4 in
    Stroke 5.9 in 5.3 in 6 in
    Speed at Rated Power 2,000 rpm - -
    Standard Capability 109 °F 109 °F 122 °F
    Maximum Torque - VHP Plus 840 lb/ft - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 HP - -
    VHP Plus - Gear - Net Power - Forward 2nd 189 HP - -
    VHP Plus - Gear - Net Power - Forward 5th 215 HP - -
    VHP Plus - Gear - Net Power - Forward 3rd 200 HP - -
    VHP Plus - Gear - Net Power - Forward 8th 231 HP - -
    Torque Rise 38% - -
    VHP Plus - Gear - Net Power - Reverse 2nd 189 HP - -
    VHP Plus - Gear - Net Power - Forward 1st 179 HP - -
    VHP Plus - Gear - Net Power - Forward 6th 220 HP - -
    VHP Plus - Gear - Net Power - Reverse 1st 179 HP - -
    VHP Plus Range - Net 133-172 kW (179-231 hp) - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
    VHP Plus - Gear - Net Power - Forward 7th 225 HP - -
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) - -
    VHP Plus - Gear - Net Power - Forward 4th 210 HP - -
    Base Power (1st Gear) - Net - Metric 181 HP - -
    High Ambient - Fan Speed - Standard 1,400 rpm - -
    Displacement 567.5 in³ 427.8 in³ 1648 in³
    Number of Cylinders 6 6 12
    Derating Altitude 10000 ft 9842 ft -
    High Ambient - Fan Speed - Maximum 1,550 rpm - -
    High Ambient - Fan Speed - Minimum 500 rpm - -
    High - Ambient Capability 122 °F 122 °F -
    Engine Power (ISO 14396) - 196 HP -
    Engine RPM - 2,200 -
    Maximum Torque - ISO 9249 - 616 lb/ft -
    Torque Rise - ISO 9294 - 40% -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Note (2) - Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Optimized VHP Plus is standard for the 24.
    Note (3) - Power as declared per ISO 14396 Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Engine Power AWD (ISO 14396) - 196 HP -
    Net Power - EEC 80/1269 - - 535 HP
    Note (4) - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)

    Weights
    Operating Weight - Typically Equipped 42647 lb 38912 lb 165314 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - -
    Operating Weight - Typically Equipped - Front Axle 12055 lb - -
    Operating Weight - Typically Equipped - Rear Axle 30592 lb - -
    Gross Vehicle Weight - Base - Front Axle 9343 lb - -
    Gross Vehicle Weight - Base - Rear Axle 28077 lb - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - -
    Gross Vehicle Weight - Base - Total 37420 lb - -
    Operating Weight - Typically Equipped - Total 42647 lb - -
    Note - * Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. -

    Moldboard
    Blade Width 12 ft 12 ft 24 ft
    Moldboard - Height 24 in - -
    Moldboard - Thickness 0.87 in - -
    Arc Radius 16.3 in 16.3 in -
    Throat Clearance 6.5 in 4.4 in -
    Cutting Edge Width 6 in 6 in -
    Cutting Edge Thickness 0.6 in - -
    End Bit - Width 6 in - -
    End Bit - Thickness 0.6 in - -
    Blade Pull - Base GVW 25269 lb - -
    Blade Pull - Maximum GVW 34262 lb - -
    Blade Down Pressure - Base GVW 16038 lb - -
    Blade Down Pressure - Maximum GVW 29309 lb - -
    Moldboard - Blade Width 12 ft - -
    Blade Height - 24 in 40 in
    End Bit - 6 in -

    Operating Specifications
    Top Speed - Forward 29 mile/h - -
    Top Speed - Reverse 23 mile/h - -
    Turning Radius - Outside Front Tires 25.59 ft - -
    Steering Range - Left/Right 50° - -
    Articulation Angle - Left/Right 20° - -
    Forward - 1st 2.5 mile/h - -
    Forward - 2nd 3.4 mile/h - -
    Forward - 3rd 5 mile/h - -
    Forward - 4th 6.9 mile/h - -
    Forward - 5th 10.6 mile/h - -
    Forward - 6th 14.5 mile/h - -
    Forward - 7th 19.9 mile/h - -
    Forward - 8th 29 mile/h - -
    Reverse - 1st 2 mile/h - -
    Reverse - 2nd 3.7 mile/h - -
    Reverse - 3rd 5.4 mile/h - -
    Reverse - 4th 8.4 mile/h - -
    Reverse - 5th 15.7 mile/h - -
    Reverse - 6th 23 mile/h - -

    Service Refill
    Fuel Capacity 104 gal (US) - -
    Cooling System 15 gal (US) - -
    Hydraulic System - Total 26.4 gal (US) - -
    Hydraulic System - Tank 16.9 gal (US) - -
    Diesel Exhaust Fluid 5.8 gal (US) - -
    Transmission - Differential - Final Drives 18.5 gal (US) - -
    Engine Oil 7.9 gal (US) - -
    Tandem Housing - Each 20 gal (US) - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - -
    Circle Drive Housing 1.8 gal (US) - -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - -
    Transmission APECS, Direct Drive, Powershift - -
    Brakes - Service Multiple Oil Disc - -
    Brakes - Service - Surface Area 3565 in² - -
    Brakes - Parking Multiple Oil Disc - -
    Brakes - Secondary Dual Circuit - -

    Hydraulic System
    Circuit Type Parallel - -
    Pump Type Variable Piston - -
    Pump Output 55.7 gal/min - -
    Maximum System Pressure 3500 psi - -
    Reservoir Tank Capacity 16.9 gal (US) - -
    Standby Pressure 885 psi - -

    Frame
    Drawbar - Width 3 in - -
    Circle - Diameter 60.2 in - -
    Circle - Blade Beam Thickness 1.6 in - -
    Drawbar - Height 6 in - -
    Front Frame Structure - Height 12.6 in - -
    Circle - Height 5.4 in - -
    Front Frame Structure - Width 12 in - -
    Drawbar - Thickness 0.5 in - -
    Front-Top/Bottom Plate - Width 12 in - -
    Front-Top/Bottom Plate - Thickness 0.87 in - -
    Front Axle - Height to Center 23.5 in - -
    Front Axle - Wheel Lean - Left/Right 18° - -
    Front Axle - Total Oscillation per Side 32° - -

    Blade Range
    Circle Centershift - Right 28.7 in - -
    Circle Centershift - Left 27.4 in - -
    Moldboard Sideshift - Right 26 in - -
    Moldboard Sideshift - Left 20.1 in - -
    Maximum Blade Position Angle 90° - -
    Blade Tip Range - Forward 40° - -
    Blade Tip Range - Backward 5° - -
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in - -
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in - -
    Maximum Lift Above Ground 18.9 in 18.7 in 16.1 in
    Maximum Depth of Cut 28.1 in 28.1 in 21.7 in
    Circle Center Shift Left - 29.6 in -
    Circle Center Shift Right - 28.7 in -
    Maximum Shoulder Reach Left - 74.3 in -
    Maximum Shoulder Reach Right - 71.3 in -
    Moldboard Side Shift Left - 25.6 in -
    Moldboard Side Shift Right - 20.7 in -
    Blade Tip Range Backward - 5 -
    Blade Tip Range Forward - 40 -

    Ripper
    Ripping Depth - Maximum 16.8 in - -
    Ripper Shank Holder Spacing 21 in - -
    Ripper Shank Holders 5 - -
    Penetration Force 20812 lb - -
    Pry-Out Force 27794 lb - -
    Machine Length Increase, Beam Raised 40.6 in - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - -
    Mid, V-Type - Scarifier Shank Holders 11 - -
    Rear - Scarifying Depth, Maximum 16.8 in - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - -
    Front, V-Type - Working Width 47.4 in - -
    Mid, V-Type - Working Width 46.6 in - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - -
    Rear - Working Width 84 in - -
    Rear - Scarifier Shank Holders 9 - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - -

    Standards
    Brakes ISO 3450 - -
    Sound ISO 6394; ISO 6395 - -
    Steering ISO 5010 - -
    ROPS/FOPS ISO 3471/ISO 3449 - -

    Tandems
    Height 19.9 in - -
    Width 7.9 in - -
    Sidewall Thickness - Inner 0.63 in - -
    Sidewall Thickness - Outer 0.71 in - -
    Drive Chain Pitch 2 in - -
    Wheel Axle Spacing 60 in - -
    Tandem Oscillation - Front Up 15° - -
    Tandem Oscillation - Front Down 25° - -

    Dimensions
    Height - Top of Cab 130 in - -
    Length - Counterweight to Ripper 399 in - -
    Width - Outside Front Tires 98.9 in - -
    Length - Front Axle to Mid Tandem 241 in - -
    Length - Front Tire to Rear of Machine 351 in - -
    Length - Front Axle to Moldboard 100 in - -
    Length - Between Tandem Axles 60 in - -
    Width - Outside Rear Tires 98.9 in - -
    Width - Tire Center Lines 84.3 in - -
    Height - Front Axle Center 23.5 in - -
    Height - Exhaust Stack 128 in - -
    Height - Top of Cylinders 120 in - -
    Ground Clearance - Rear Axle 13.3 in - -
    Width All Wheel Drive (AWD) - 99.3 in -
    Length of Machine* - 406.7 in -
    Maximum Height - 132.4 in -
    Width - 95.6 in -
    Note - *Typically equipped with push block and ripper. -

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. -

    Service Refill Capacities
    Fuel Tank - 78 gal (US) -
    Circle Drive with Slip Clutch - 2 gal (US) -
    Circle Drive without Slip Clutch - 0.5 gal (US) -
    Cooling System - 40 l -
    Engine Crankcase - 5.5 gal (US) -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 4.2 gal (US) -
    Hydraulic System - 11.9 gal (US) -
    Transmission - 4.8 gal (US) -

    Weight
    Weight (Tier 4 Final)** - 40488 lb -
    All-wheel Drive Weight (AWD) (Tier 4 Final)** - 42119 lb -
    All-Wheel Drive Weight (AWD) (Stage V)* - 40543 lb -
    Weight (Stage V)* - 38912 lb -

    Machine Weight
    Weight* - - 161695 lb
    Add a Similar Product: