Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
-
Note (2)
-
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (3)
-
Power as declared per ISO 14396
-
Engine Power AWD (ISO 14396)
-
196 HP
-
Weights
Operating Weight - Typically Equipped
42647 lb
38912 lb
-
Gross Vehicle Weight - Maximum - Front Axle
17075 lb
-
-
Gross Vehicle Weight - Maximum - Rear Axle
38069 lb
-
-
Operating Weight - Typically Equipped - Front Axle
12055 lb
-
-
Operating Weight - Typically Equipped - Rear Axle
30592 lb
-
-
Gross Vehicle Weight - Base - Front Axle
9343 lb
-
-
Gross Vehicle Weight - Base - Rear Axle
28077 lb
-
-
Gross Vehicle Weight - Maximum - Total
55144 lb
-
-
Gross Vehicle Weight - Base - Total
37420 lb
-
-
Operating Weight - Typically Equipped - Total
42647 lb
-
-
Note
-
* Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment.
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
18.4 in
-
-
Mid, V-Type - Scarifier Shank Holders
11
-
-
Rear - Scarifying Depth, Maximum
16.8 in
-
-
Front, V-Type, 5 or 11 Tooth - Working Width
40.6 in
-
-
Front, V-Type - Working Width
47.4 in
-
-
Mid, V-Type - Working Width
46.6 in
-
-
Mid, V-Type - Scarifying Depth, Maximum
11.5 in
-
-
Mid, V-Type - Scarifier Shank Holder Spacing
4.6 in
-
-
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
11-May
-
-
Rear - Working Width
84 in
-
-
Rear - Scarifier Shank Holders
9
-
-
Rear - Scarifier Shank Holder Spacing
10.5 in
-
-
Standards
Brakes
ISO 3450
-
-
Sound
ISO 6394; ISO 6395
-
-
Steering
ISO 5010
-
-
ROPS/FOPS
ISO 3471/ISO 3449
-
-
Tandems
Height
19.9 in
-
-
Width
7.9 in
-
-
Sidewall Thickness - Inner
0.63 in
-
-
Sidewall Thickness - Outer
0.71 in
-
-
Drive Chain Pitch
2 in
-
-
Wheel Axle Spacing
60 in
-
-
Tandem Oscillation - Front Up
15°
-
-
Tandem Oscillation - Front Down
25°
-
-
Dimensions
Height - Top of Cab
130 in
-
-
Length - Counterweight to Ripper
399 in
-
-
Width - Outside Front Tires
98.9 in
-
-
Length - Front Axle to Mid Tandem
241 in
-
-
Length - Front Tire to Rear of Machine
351 in
-
-
Length - Front Axle to Moldboard
100 in
-
-
Length - Between Tandem Axles
60 in
-
-
Width - Outside Rear Tires
98.9 in
-
-
Width - Tire Center Lines
84.3 in
-
-
Height - Front Axle Center
23.5 in
-
-
Height - Exhaust Stack
128 in
-
-
Height - Top of Cylinders
120 in
-
-
Ground Clearance - Rear Axle
13.3 in
-
-
Width All Wheel Drive (AWD)
-
99.3 in
-
Length of Machine*
-
406.7 in
-
Maximum Height
-
132.4 in
-
Width
-
95.6 in
-
Note
-
*Typically equipped with push block and ripper.
-
Air Conditioning System
Note
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.