CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    140/140 AWD Motor Grader
    View Product
    120 - 2019 - N Am, Global
    View Product Remove
    140 Motor Grader LVR
    View Product Remove
    24 Motor Grader
    View Product Remove

    Engine
    Net Power Range (Tier 4) 179 HP - - -
    Engine Model Cat® C9.3 Cat 7.1 Cat C9.3 Cat C27
    Bore 4.5 in 4.1 in 4.5 in 5.4 in
    Stroke 5.9 in 5.3 in 5.9 in 6 in
    Speed at Rated Power 2,000 rpm - - -
    Standard Capability 109 °F 122 °F 109 °F 122 °F
    Maximum Torque - VHP Plus 840 lb/ft - - -
    VHP Plus - Gear - Net Power - Reverse 3rd-6th 200 HP - - -
    VHP Plus - Gear - Net Power - Forward 2nd 189 HP - - -
    VHP Plus - Gear - Net Power - Forward 5th 215 HP - - -
    VHP Plus - Gear - Net Power - Forward 3rd 200 HP - - -
    VHP Plus - Gear - Net Power - Forward 8th 231 HP - - -
    Torque Rise 38% - - -
    VHP Plus - Gear - Net Power - Reverse 2nd 189 HP - - -
    VHP Plus - Gear - Net Power - Forward 1st 179 HP - - -
    VHP Plus - Gear - Net Power - Forward 6th 220 HP - - -
    VHP Plus - Gear - Net Power - Reverse 1st 179 HP - - -
    VHP Plus Range - Net 133-172 kW (179-231 hp) - - -
    Emissions U.S. EPA Tier 4 Final/EU Stage V U.S. EPA Tier 4 Final/EU Stage V - U.S. EPA Tier 3/EU Stage IIIA U.S. EPA Tier 4 Final/EU Stage V Tier 4 Final/Stage IV or Equivalent to Tier 2/Stage II
    VHP Plus - Gear - Net Power - Forward 7th 225 HP - - -
    VHP Plus Range - Net - Metric 133-172 kW (181-234 hp) - - -
    VHP Plus - Gear - Net Power - Forward 4th 210 HP - - -
    Base Power (1st Gear) - Net - Metric 181 HP - - -
    High Ambient - Fan Speed - Standard 1,400 rpm - - -
    Displacement 567.5 in³ 427.8 in³ 567.5 in³ 1648 in³
    Number of Cylinders 6 6 6 12
    Derating Altitude 10000 ft 9842.5 ft - -
    High Ambient - Fan Speed - Maximum 1,550 rpm - - -
    High Ambient - Fan Speed - Minimum 500 rpm - - -
    High - Ambient Capability 122 °F - - -
    Note (2) - Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. - Optimized VHP Plus is standard for the 24.
    Maximum Torque - ISO 9249 - 606 lb/ft - -
    All-Wheel Drive Net Power Range (Tier 3) - 130 HP - -
    Net Power Range (Tier 3) - 130 HP - -
    Note (3) - Power as declared per ISO 14396 - Net power advertised is the power available at rated speed of 1,800 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
    Engine RPM - 2,000 2,000 -
    Maximum Torque - AWD On - 611 lb/ft - -
    Note (1) - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture." - Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
    Derating Altitude (AWD) - 5499 ft - -
    Torque Rise - ISO 9294 - 42% 44% -
    Net Power - EEC 80/1269 - - 250 HP 535 HP
    Net Power - ISO 9249/SAE J1349 - - 250 HP -
    Note (4) - - - Power as declared per ISO 14396. Rated rpm 1,800 (561 hp)

    Weights
    Operating Weight - Typically Equipped 42647 lb 35067 lb 20236 lb 165314 lb
    Gross Vehicle Weight - Maximum - Front Axle 17075 lb - - -
    Gross Vehicle Weight - Maximum - Rear Axle 38069 lb - - -
    Operating Weight - Typically Equipped - Front Axle 12055 lb - - -
    Operating Weight - Typically Equipped - Rear Axle 30592 lb - - -
    Gross Vehicle Weight - Base - Front Axle 9343 lb - - -
    Gross Vehicle Weight - Base - Rear Axle 28077 lb - - -
    Gross Vehicle Weight - Maximum - Total 55144 lb - - -
    Gross Vehicle Weight - Base - Total 37420 lb - - -
    Operating Weight - Typically Equipped - Total 42647 lb - - -

    Moldboard
    Blade Width 12 ft 12 ft 12 ft 24 ft
    Moldboard - Height 24 in - - -
    Moldboard - Thickness 0.87 in - - -
    Arc Radius 16.3 in 16.3 in 16.3 in -
    Throat Clearance 6.5 in 4.1 in 6.5 in -
    Cutting Edge Width 6 in - - -
    Cutting Edge Thickness 0.6 in - - -
    End Bit - Width 6 in - - -
    End Bit - Thickness 0.6 in - - -
    Blade Pull - Base GVW 25269 lb - - -
    Blade Pull - Maximum GVW 34262 lb - - -
    Blade Down Pressure - Base GVW 16038 lb - - -
    Blade Down Pressure - Maximum GVW 29309 lb - - -
    Moldboard - Blade Width 12 ft - - -
    Blade Height - 24 in - 40 in
    End Bit - 6 in 6 in -
    Cutting Edge - 6 in 6 in -

    Operating Specifications
    Top Speed - Forward 29 mile/h - - -
    Top Speed - Reverse 23 mile/h - - -
    Turning Radius - Outside Front Tires 25.59 ft - - -
    Steering Range - Left/Right 50° - - -
    Articulation Angle - Left/Right 20° - - -
    Forward - 1st 2.5 mile/h - - -
    Forward - 2nd 3.4 mile/h - - -
    Forward - 3rd 5 mile/h - - -
    Forward - 4th 6.9 mile/h - - -
    Forward - 5th 10.6 mile/h - - -
    Forward - 6th 14.5 mile/h - - -
    Forward - 7th 19.9 mile/h - - -
    Forward - 8th 29 mile/h - - -
    Reverse - 1st 2 mile/h - - -
    Reverse - 2nd 3.7 mile/h - - -
    Reverse - 3rd 5.4 mile/h - - -
    Reverse - 4th 8.4 mile/h - - -
    Reverse - 5th 15.7 mile/h - - -
    Reverse - 6th 23 mile/h - - -

    Service Refill
    Fuel Capacity 104 gal (US) - - -
    Cooling System 15 gal (US) - - -
    Hydraulic System - Total 26.4 gal (US) - - -
    Hydraulic System - Tank 16.9 gal (US) - - -
    Diesel Exhaust Fluid 5.8 gal (US) - - -
    Transmission - Differential - Final Drives 18.5 gal (US) - - -
    Engine Oil 7.9 gal (US) - - -
    Tandem Housing - Each 20 gal (US) - - -
    Front Wheel Spindle Bearing Housing 0.13 gal (US) - - -
    Circle Drive Housing 1.8 gal (US) - - -
    Hydraulic System - - 14.5 gal (US) -
    Engine Crankcase - - 7.9 gal (US) -
    Circle Drive - - 1.8 gal (US) -
    Fuel Tank - - 100 gal (US) -
    Front Wheel Spindle Bearing - Each - - 0.13 gal (US) -

    Power Train
    Forward/Reverse Gears 8 Forward/6 Reverse - - -
    Transmission APECS, Direct Drive, Powershift - - -
    Brakes - Service Multiple Oil Disc - - -
    Brakes - Service - Surface Area 3565 in² - - -
    Brakes - Parking Multiple Oil Disc - - -
    Brakes - Secondary Dual Circuit - - -

    Hydraulic System
    Circuit Type Parallel - - -
    Pump Type Variable Piston - - -
    Pump Output 55.7 gal/min - - -
    Maximum System Pressure 3500 psi - - -
    Reservoir Tank Capacity 16.9 gal (US) - - -
    Standby Pressure 885 psi - - -

    Frame
    Drawbar - Width 3 in - - -
    Circle - Diameter 60.2 in - - -
    Circle - Blade Beam Thickness 1.6 in - - -
    Drawbar - Height 6 in - - -
    Front Frame Structure - Height 12.6 in - - -
    Circle - Height 5.4 in - - -
    Front Frame Structure - Width 12 in - - -
    Drawbar - Thickness 0.5 in - - -
    Front-Top/Bottom Plate - Width 12 in - - -
    Front-Top/Bottom Plate - Thickness 0.87 in - - -
    Front Axle - Height to Center 23.5 in - - -
    Front Axle - Wheel Lean - Left/Right 18° - - -
    Front Axle - Total Oscillation per Side 32° - - -

    Blade Range
    Circle Centershift - Right 28.7 in - - -
    Circle Centershift - Left 27.4 in - - -
    Moldboard Sideshift - Right 26 in - - -
    Moldboard Sideshift - Left 20.1 in - - -
    Maximum Blade Position Angle 90° - - -
    Blade Tip Range - Forward 40° - - -
    Blade Tip Range - Backward 5° - - -
    Maximum Shoulder Reach Outside of Tires - Right 77.9 in - - -
    Maximum Shoulder Reach Outside of Tires - Left 70.5 in - - -
    Maximum Lift Above Ground 18.9 in 16.1 in 18.9 in 16.1 in
    Maximum Depth of Cut 28.1 in 30.5 in 28.9 in 21.7 in
    Blade Tip Range Forward - 40 - -
    Maximum Shoulder Reach Right - 76 in - -
    Moldboard Side Shift Right - 26.1 in - -
    Maximum Shoulder Reach Left - 69.4 in - -
    Moldboard Side Shift Left - 20.1 in - -
    Circle Center Shift Left - 26 in - -
    Blade Tip Range Backward - 5 - -
    Circle Center Shift Right - 26 in - -

    Ripper
    Ripping Depth - Maximum 16.8 in - - -
    Ripper Shank Holder Spacing 21 in - - -
    Ripper Shank Holders 5 - - -
    Penetration Force 20812 lb - - -
    Pry-Out Force 27794 lb - - -
    Machine Length Increase, Beam Raised 40.6 in - - -

    Scarifier
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum 18.4 in - - -
    Mid, V-Type - Scarifier Shank Holders 11 - - -
    Rear - Scarifying Depth, Maximum 16.8 in - - -
    Front, V-Type, 5 or 11 Tooth - Working Width 40.6 in - - -
    Front, V-Type - Working Width 47.4 in - - -
    Mid, V-Type - Working Width 46.6 in - - -
    Mid, V-Type - Scarifying Depth, Maximum 11.5 in - - -
    Mid, V-Type - Scarifier Shank Holder Spacing 4.6 in - - -
    Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders 11-May - - -
    Rear - Working Width 84 in - - -
    Rear - Scarifier Shank Holders 9 - - -
    Rear - Scarifier Shank Holder Spacing 10.5 in - - -

    Standards
    Brakes ISO 3450 - - -
    Sound ISO 6394; ISO 6395 - - -
    Steering ISO 5010 - - -
    ROPS/FOPS ISO 3471/ISO 3449 - - -

    Tandems
    Height 19.9 in - - -
    Width 7.9 in - - -
    Sidewall Thickness - Inner 0.63 in - - -
    Sidewall Thickness - Outer 0.71 in - - -
    Drive Chain Pitch 2 in - - -
    Wheel Axle Spacing 60 in - - -
    Tandem Oscillation - Front Up 15° - - -
    Tandem Oscillation - Front Down 25° - - -

    Dimensions
    Height - Top of Cab 130 in - - -
    Length - Counterweight to Ripper 399 in - - -
    Width - Outside Front Tires 98.9 in - - -
    Length - Front Axle to Mid Tandem 241 in - - -
    Length - Front Tire to Rear of Machine 351 in - - -
    Length - Front Axle to Moldboard 100 in - - -
    Length - Between Tandem Axles 60 in - - -
    Width - Outside Rear Tires 98.9 in - - -
    Width - Tire Center Lines 84.3 in - - -
    Height - Front Axle Center 23.5 in - - -
    Height - Exhaust Stack 128 in - - -
    Height - Top of Cylinders 120 in - - -
    Ground Clearance - Rear Axle 13.3 in - - -
    Maximum Height - 136.4 in 132 in -
    Length of Machine* - 387 in 397.6 in -
    Width All Wheel Drive (AWD) - 2551 mm - -
    Width - 102 in 97.6 in -
    Note - *Typically equipped with push block and ripper. *Typically equipped with push block and ripper. -
    Basic Blade Width - 12 ft 140 in -

    Service Refill Capacities
    Transmission and Differential - 9 gal (US) - -
    Circle Drive - 1.8 gal (US) - -
    Fuel Tank - 65 gal (US) - -
    Cooling System - 14 gal (US) - -
    Engine Crankcase - 4.8 gal (US) - -
    Diesel Exhaust Fluid Tank (Tier 4 Only) - 5 gal (US) - -
    Hydraulic System - 25.6 gal (US) - -

    Machine Weight
    Lever/Steering Wheel All-Wheel drive (AWD) Weight* Tier 4 - 36731 lb - -
    Note (1) - *Typically equipped includes 4267 mm (14 ft) plus blade, tires, push plate, ripper, bottom guard, operator, and full fluids. - -
    Joystick Weight* Tier 4 - 35358 lb - -
    Joystick All-Wheel Drive (AWD) Weight* Tier 4 - 36846 lb - -
    Lever/Steering Wheel Weight* Tier 4 - 35067 lb - -
    Note - - *Typically equipped with push block and ripper. -
    All-Wheel Drive (AWD) Weight - - 44613 lb -
    Weight* - - 42325 lb 161695 lb

    Air Conditioning System
    Note - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg of refrigerant which has a carbon dioxide equivalent of 2.288 metric tonnes. - -
    Add a Similar Product: