Compare Equipment Go Back
DG125 (Single-phase and 3 phase) (60 Hz) |
Cat Switchgear |
Cat EGP Switchgear |
|
Generator Set Specifications |
|||
---|---|---|---|
Frequency | 60 Hz | - | - |
Gas Standby Rating | 125 ekW | - | - |
Emissions/Fuel Strategy | U.S. EPA Certified for Stationary Emergency and Non-Emergency Application | - | - |
Voltage | 208-600 | - | - |
Speed | 1800 rpm | - | - |
Natural Gas Rating | 125 ekW | - | - |
Engine Specifications |
|||
Engine Model | V8, 6.2L TCAC | - | - |
Bore | 4 in | - | - |
Stroke | 3.75 in | - | - |
Displacement | 378.3 in³ | - | - |
Compression Ratio | 9.8:1 | - | - |
Aspiration | TCAC | - | - |
Fuel System | Electronic | - | - |
Generator Set Dimensions |
|||
Length | 96 in | - | - |
Width | 51 in | - | - |
Height | 57 in | - | - |
Dry Weight - Genset | 3226 lb | - | - |
Enclosure Rating |
|||
Configuration | - | IP4X | - |
Operating Temperature |
|||
Operating Temperature | - | 35 °C / 40 °C @ 1 hr, option for 0…50 °C (32…122 °F) | - |
Dimensions |
|||
Standard Widths | - | 600 mm for ABB Emax2 E2 1600 - 2500A. 750 mm for ABB Emax2 E4 3200 - 4000A. 1200 mm for ABB Emax2 E6 4000 - 6300A. | - |
Standard Heights | - | Heights include 100mm plinth with fork lift pockets, 1900 mm up to 3200A, 2200 mm for 400,2200 mm for PLC and control cabinets. Option for single point lifting on 4 corners with M10 swivel eyes. Standard sizes for shipping | - |
Standard Depths | - | 300, 450 & 750mm for controls and PLC cabinets. 900mm for fixed breakers. 1050mm for withdrawable breakers | - |
Technical Summary |
|||
Technical Summary | - | Modular system enables any configuration Distribution Boards, Motor Control Centers & PLC Control cabinets. Accommodates fixed or withdrawable breakers. | - |
Configuration | - | - | Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications |
Modes of Operation | - | - | Multi-unit Island and multi-unit standby mode with optional redundant controls and components. |
Application | - | - | LV and MV (208V - 38 kV) |
Application |
|||
Application | - | LV 380…480 VAC, 50 Hz, 3-Phase. | - |
Modes of Operation |
|||
Modes of Operation | - | Switchgear integration options for multi generator and utility synchronising, load sharing, Peak Lopping/Shaving, AMF, Changeover, Load bank connection, Protection relay etc. | - |
Generator Protective Devices |
|||
ANSI Protective Devices | - | - | 15/25, 27/59, 81 O/U, 32, 40, 50, 51 |
Environmental Parameters |
|||
Certifications | - | - | IBC, CBC, UBC & OSHPD Certified |
Control Panel Enclosure | - | - | NEMA 1 or NEMA 3R Freestanding Construction |
Operating Temperature | - | - | 0°C to 50°C |
Storage Temperature | - | - | -20°C to +60°C |
Low Voltage Standards | - | - | NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70 |
Medium Voltage Standards | - | - | NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110 |
Add a Similar Product:
-
Cat XLM Switchgear Add
-
Cat Customizable Switchgear and Controls Add
-
EMCP 4.4 Master Control Panel Add
-
Engine Paralleling and Integration Control (EPIC) Add
-
Cat® BDP1000 Bi-Directional Power Inverter Add
-
Energy Time Shift (ETS) Module Add
-
Energy Capacity Expansion (ECE) module Add
-
Temporary Connection Boxes Add
-
XQ570 Tier 4 Final – 455 ekW (568 kVA) Add
-
XQP550 EU Stage V Add