CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    824K Wheel Dozer
    View Product
    834 Wheel Dozer
    View Product Remove
    D10 Dozer
    View Product Remove

    Engine
    Engine Model Cat® C15 Cat® C18 -
    Net Power - ISO 9249 405 HP - -
    Stroke 6.7 in 7.2 in -
    Gross Power 435 HP - -
    Emissions Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. -
    Displacement 927.6 in³ 1105 in³ -
    Bore 5.4 in 5.7 in -
    Rated Speed - 1900 r/min -
    Peak Power Speed - 1500 r/min -
    Gross Power - SAE J1995 - 562 HP -
    Net Power - SAE J1349 - 496 HP -
    Peak Torque - 1,300 rpm - 2092 lb/ft -
    Torque Rise - 52 % -

    Transmission
    Transmission Type Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung) Cat planetary power shift -
    Forward - 1 - 4.2 mile/h -
    Forward - 2 - 7.2 mile/h -
    Forward - 3 - 12.6 mile/h -
    Forward - 4 - 22 mile/h -
    Reverse - 1 - 4.2 mile/h -
    Reverse - 2 - 7.6 mile/h -
    Reverse - 3 - 13.3 mile/h -
    Direct Drive - Forward 1 - Lock-up disabled -
    Direct Drive - Forward 2 - 7.7 mile/h -
    Direct Drive - Forward 3 - 13.7 mile/h -
    Direct Drive - Forward 4 - 23.9 mile/h -
    Direct Drive - Reverse 1 - 4.5 mile/h -
    Direct Drive - Reverse 2 - 8.1 mile/h -
    Direct Drive - Reverse 3 - 14.3 mile/h -
    1.0 Forward - - 2.5 mile/h
    1.5 Forward - - 3.4 mile/h
    2.0 Forward - - 4.5 mile/h
    2.5 Forward - - 6 mile/h
    3.0 Forward - - 7.8 mile/h
    1.0 Reverse - - 3.2 mile/h
    1.5 Reverse - - 4.2 mile/h
    2.0 Reverse - - 5.6 mile/h
    2.5 Reverse - - 7.5 mile/h
    3.0 Reverse - - 9.8 mile/h
    Transmission Clutch Diameter - - 17 in
    Type - - Planetary powershift

    Axles
    Front Planetary – Fixed Fixed -
    Rear Planetary – Oscillating Trunnion -
    Oscillation Angle ±11° ±13° -

    Service Refill Capacities
    Differential - Final Drives - Front 26.4 gal (US) 49.1 gal (US) -
    Fuel Tank 206.6 gal (US) 209.5 gal (US) -
    Differential - Final Drives - Rear 29.1 gal (US) 49.1 gal (US) -
    Transmission 17.4 gal (US) 31.7 gal (US) -
    Cooling System 30.6 gal (US) 31.7 gal (US) -
    Crankcase - 15.9 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) -
    Hydraulic System Factory Fill - 63.4 gal (US) -
    Hydraulic System - Tank Only - 37 gal (US) -

    Operating Specifications
    Operating Weight 74966 lb 105271 lb -
    Blade Capacities - 7.9 – 22.2 m3 (10.3 – 29.0 yd3) -
    Coal Scoop Operating Weight - 112428 lb -
    Chip Scoop Operating Weight - 112838 lb -

    Dimensions (Approximate)
    Height - Top of Hood 10.5 ft - -
    Height - Top of Cab 13.5 ft - -
    Wheel Base 12.1 ft - -
    Centerline of Rear Axle to Edge of Bumper 9.3 ft - -
    Height - Top of Exhaust Stack 14.2 ft - -
    Ground Clearance 1.4 ft - -
    Centerline of Front Axle to Hitch 6.1 ft - -
    Ground Clearance* - - 28.5 in
    Track Gauge - - 100.4 in
    Width - Without Trunnions - 610 mm/24 in ES - - 130.4 in
    Width - Over Trunnions - - 148 in
    Height - FOPS Cab* - - 162.8 in
    Height - Top of Stack* - - 171.5 in
    Height - ROPS/Canopy* - - 173.5 in
    Note (1) - - *Includes grouser height for total dimensions on hard surfaces.
    Length - Track on Ground - - 152.8 in
    Overall Length - Basic Tractor - - 209.6 in
    Length - With SU-Blade - - 292 in
    Length - With U-Blade - - 305.1 in
    Length - With Single-Shank Ripper - - 278.8 in
    Length - With Multi-Shank Ripper - - 285.1 in
    Overall Length - SU-Blade/SS Ripper - - 360.6 in

    Hydraulic System
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke 140 mm × 230 mm (5.5 in × 9.1 in) - -
    Cylinders, Double Acting - Lift, Bore and Stroke 120 mm × 1070 mm (4.7 in × 42.1 in) - -

    Hydraulic System - Steering
    Steering System - Circuit Double Acting – End Mounted Pilot, load sensing -
    Steering System - Pump Piston – Variable Displacement Piston, variable displacement -
    Maximum Flow - 65.8 gal/min -
    Relief Valve Setting - Steering - 3495 psi -
    Total Steering Angle - 86 ° -
    Steering Cycle Times - High Idle - 3.1 s -
    Steering Cycle Times - Low Idle - 5.7 s -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH -
    Lift/Tilt System - Variable displacement piston -
    Maximum Flow at 1,900 rpm - 153 gal/min -
    Relief Valve Setting - Lift/Tilt - 4641 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke - 139.75 mm × 1021 mm (5.5 in × 40.2 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 140 mm × 230 mm (5.5 in × 9.1 in) -
    Pilot System - Variable displacement piston -
    Pilot Maximum Flow - 13.7 gal/min -
    Pilot Relief Valve Setting - 580 psi -

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.

    Brakes
    Brakes - ISO 3450: 2011 -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 113 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 72 dB(A) -
    Machine Sound Level (ISO 6395) - 109 dB(A) -

    Dimensions
    Height - Top of Exhaust Stack - 15.9 ft -
    Height - Top of Air Cleaner - 12.8 ft -
    Height - Top of Hood - 10.9 ft -
    Ground Clearance - Bumper - 3.1 ft -
    Centerline of Rear Axle to Edge of Bumper - 10.5 ft -
    Wheel Base - 14.9 ft -
    Length - Front of Tire - 28.4 ft -
    Length - Straight Blade on Ground - 32.6 ft -
    Centerline of Front Axle to Hitch - 7.5 ft -
    Length - Universal Blade on Ground - 34.4 ft -
    Ground Clearance - 1.7 ft -
    Height - Top of Cab - 13.7 ft -

    Scoops
    Chip Scoop Carry Capacity - 35 yd³ -
    Chip Scoop Doze Capacity - 70 yd³ -
    Coal Scoop Carry Capacity - 30 yd³ -
    Coal Scoop Doze Capacity - 60 yd³ -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - Cat® C27
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - 602 HP
    Engine Power - Gross SAE J1995* - Forward - - 631 HP
    Engine Power - Gross SAE J1995* - Reverse - - 766 HP
    Engine Power - ISO 14396* - Forward - - 620 HP
    Engine Power - ISO 14396* - Reverse - - 754 HP
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - 722 HP
    Displacement - - 1648 in³
    Stroke - - 6 in
    Bore - - 5.4 in
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V
    Note (1) - - *Excludes all fan losses.
    Note (2) - - All Engine ratings apply at 1,800 rpm.
    Note (3) - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
    Note (4) - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
    Note (5) - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

    Weights
    Operating Weight - - 154888 lb
    Shipping Weight - - 111739 lb
    Note (1) - - D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
    Note (2) - - D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.

    Undercarriage
    Shoe Type - - Extreme Service (ES)
    Width - Shoe - - 24 in
    Shoes/Side - - 44
    Grouser Height - - 3.7 in
    Pitch - - 10.2 in
    Ground Clearance - - 28.5 in
    Track Gauge - - 100.4 in
    Length - Track on Ground - - 152.8 in
    Ground Contact Area - - 7347 in²
    Track Rollers/Side - - 8
    Number of Carrier Rollers - - 1 per side (optional)

    Standards
    ROPS - - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
    FOPS - - Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
    Sound - - Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
    Note - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
    Sound (1) - - Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
    Note (1) - - The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
    Note (2) - - The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
    Note (3) - - The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).

    Steering and Brakes
    Steering Type - - Hydraulically Applied Multiple-Disc Steering Clutch
    Brake Type - - Spring Applied Multiple- Disc Brake
    Brake Diameter - - 15.4 in
    Brake Count - - 10

    Blades
    10SU ABR - Capacity (SAE J1265) - - 24.2 yd³
    10SU ABR - Width (over end bits) - - 194.5 in
    10SU ABR - Height - - 83.5 in
    10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - 19.98 in
    10SU ABR - Digging Depth - Blade Pitch: Nominal - - 25.23 in
    10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - 30.08 in³
    10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - 66.14 in
    10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - 53.86 in
    10SU ABR - Ground Clearance - Maximum Tilt LH - - 56.3 in
    10SU ABR - Ground Clearance - Maximum Tilt RH - - 56.3 in
    10U ABR - Capacity (SAE J1265) - - 28.7 yd³
    10U ABR - Width (over end bits) - - 207.1 in
    10U ABR - Height - - 83.5 in
    10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry) - - 19.98 in
    10U ABR - Digging Depth - Blade Pitch: Nominal - - 60 in
    10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread) - - 30.1 in
    10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry) - - 66.1 in
    10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread) - - 53.9 in
    10U ABR - Ground Clearance - Maximum Tilt LH - - 60.8 in
    10U ABR - Ground Clearance - Maximum Tilt RH - - 60.8 in
    10U ABR - Weights - Blade Weight* - - 23585 lb
    10U ABR - Weights - Total Operating Weight** (with blade and SS ripper) - - 154888 lb
    Note (1) - - Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
    Note (2) - - *Does not include hydraulic controls but includes blade cylinders, pusharms.
    Note (3) - - **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - 49233 lbf
    Maximum penetration depth (standard tip) - - 59.2 in
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 36 in
    Weight - - 14209 lb
    Note - - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - 53055 lbf
    Maximum penetration depth (standard tip) - - 78.3 in
    Weight - - 14548 lb
    Note - - Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - - Cat® C27
    Engine Power - Net SAE J1349/ISO 9249** - Forward - - 603 HP
    Engine Power - Net SAE J1349/ISO 9249** - Reverse - - 722 HP
    Engine Power - Gross SAE J1995* - Forward - - 631 HP
    Engine Power - Gross SAE J1995* - Reverse - - 766 HP
    Engine Power - ISO 14396* - Forward - - 622 HP
    Engine Power - ISO 14396* - Reverse - - 756 HP
    Displacement - - 1648 in³
    Bore - - 5.4 in
    Stroke - - 6 in
    Emissions - - U.S. EPA Tier 2 Equivalent
    Note (1) - - *Excludes all fan losses.
    Note (2) - - All Engine ratings apply at 1,800 rpm.
    Note (3) - - Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
    Note (4) - - Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
    Note (5) - - **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

    Fuel Tank Capacities
    Fuel Tank - Usable Volume - - 323.3 gal (US)
    Fuel Tank - Total Volume - - 335.2 gal (US)

    Hydraulic Controls
    Pump Type - - Variable displacement piston
    Pump Output - Implement - - 112 gal/min
    Note (1) - - Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).
    Fan Pump - - 21.7 gal/min
    Note (2) - - Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
    Tilt Cylinder Flow - Rod End Flow - - 112 gal/min
    Tilt Cylinder Flow - Head End Flow - - 63.4 gal/min
    Lift Cylinder Relief Valve Setting - - 4061.1 psi
    Tilt Cylinder Relief Valve Setting - - 3872.5 psi
    Ripper - Lift - Relief Valve Setting - - 4061.1 psi
    Ripper - Pitch - Relief Valve Setting - - 4061.1 psi
    Tank Capacity - - 32.2 gal (US)
    Cylinder Sizing - Blade Lift - Bore - - 5.5 in
    Cylinder Sizing - Blade Tilt - Bore - - 8.3 in
    Cylinder Sizing - Ripper Shank Lift - Bore - - 8.3 in
    Cylinder Sizing - Ripper Shank Angle - Bore - - 7.1 in
    Cylinder Sizing - Blade Lift - Stroke - - 65.1 in
    Cylinder Sizing - Blade Tilt - Stroke - - 9.5 in
    Cylinder Sizing - Ripper Shank Lift - Stroke - - 21.1 in
    Cylinder Sizing - Ripper Shank Angle - Stroke - - 26 in
    Note (3) - - Electro-hydraulic pilot valves assist operations of ripper and dozer controls.

    FLUID CAPACITIES
    Cooling System Refill – Tier 4 Final Engine - - 46.2 gal (US)
    Engine Crankcase Sump - - 27.2 gal (US)
    Power Train - Total Volume - - 81.4 gal (US)
    Power Train - Refill Volume - - 74.8 gal (US)
    Final Drives (each) - - 12.2 gal (US)
    Track Roller Frames (each) - - 16.9 gal (US)
    Pivot Shaft Oil - - 9.5 gal (US)
    Hydraulic System Tank - - 32.2 gal (US)
    Add a Similar Product: