*Includes grouser height for total dimensions on hard surfaces.
-
Length - Track on Ground
-
152.8 in
-
Overall Length - Basic Tractor
-
209.6 in
-
Length - With SU-Blade
-
292 in
-
Length - With U-Blade
-
305.1 in
-
Length - With Single-Shank Ripper
-
278.8 in
-
Length - With Multi-Shank Ripper
-
285.1 in
-
Overall Length - SU-Blade/SS Ripper
-
360.6 in
-
Hydraulic System
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
-
-
Cylinders, Double Acting - Lift, Bore and Stroke
120 mm × 1070 mm (4.7 in × 42.1 in)
-
-
Hydraulic System - Steering
Steering System - Circuit
Double Acting – End Mounted
-
-
Steering System - Pump
Piston – Variable Displacement
-
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
-
Cat® C27
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
602 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
620 HP
-
Engine Power - ISO 14396* - Reverse
-
754 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Displacement
-
1648 in³
-
Stroke
-
6 in
-
Bore
-
5.4 in
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
All Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Weights
Operating Weight
-
154888 lb
-
Shipping Weight
-
111739 lb
-
Note (1)
-
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Note (2)
-
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
-
Undercarriage
Shoe Type
-
Extreme Service (ES)
-
Width - Shoe
-
24 in
-
Shoes/Side
-
44
-
Grouser Height
-
3.7 in
-
Pitch
-
10.2 in
-
Ground Clearance
-
28.5 in
-
Track Gauge
-
100.4 in
-
Length - Track on Ground
-
152.8 in
-
Ground Contact Area
-
7347 in²
-
Track Rollers/Side
-
8
-
Number of Carrier Rollers
-
1 per side (optional)
-
Standards
ROPS
-
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
-
FOPS
-
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
-
Sound
-
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
-
Note
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
-
Sound (1)
-
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
-
Note (1)
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
-
Note (2)
-
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
-
Note (3)
-
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
-
Blades
10SU ABR - Capacity (SAE J1265)
-
24.2 yd³
-
10SU ABR - Width (over end bits)
-
194.5 in
-
10SU ABR - Height
-
83.5 in
-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10SU ABR - Digging Depth - Blade Pitch: Nominal
-
25.23 in
-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.08 in³
-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.14 in
-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.86 in
-
10SU ABR - Ground Clearance - Maximum Tilt LH
-
56.3 in
-
10SU ABR - Ground Clearance - Maximum Tilt RH
-
56.3 in
-
10U ABR - Capacity (SAE J1265)
-
28.7 yd³
-
10U ABR - Width (over end bits)
-
207.1 in
-
10U ABR - Height
-
83.5 in
-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10U ABR - Digging Depth - Blade Pitch: Nominal
-
60 in
-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.9 in
-
10U ABR - Ground Clearance - Maximum Tilt LH
-
60.8 in
-
10U ABR - Ground Clearance - Maximum Tilt RH
-
60.8 in
-
10U ABR - Weights - Blade Weight*
-
23585 lb
-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
-
154888 lb
-
Note (1)
-
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
-
Note (2)
-
*Does not include hydraulic controls but includes blade cylinders, pusharms.
-
Note (3)
-
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
-
49233 lbf
-
Maximum penetration depth (standard tip)
-
59.2 in
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
36 in
-
Weight
-
14209 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
-
53055 lbf
-
Maximum penetration depth (standard tip)
-
78.3 in
-
Weight
-
14548 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
-
Cat® C27
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
603 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
622 HP
-
Engine Power - ISO 14396* - Reverse
-
756 HP
-
Displacement
-
1648 in³
-
Bore
-
5.4 in
-
Stroke
-
6 in
-
Emissions
-
U.S. EPA Tier 2 Equivalent
-
Note (1)
-
*Excludes all fan losses.
-
Note (2)
-
All Engine ratings apply at 1,800 rpm.
-
Note (3)
-
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Fuel Tank Capacities
Fuel Tank - Usable Volume
-
323.3 gal (US)
-
Fuel Tank - Total Volume
-
335.2 gal (US)
-
Hydraulic Controls
Pump Type
-
Variable displacement piston
-
Pump Output - Implement
-
112 gal/min
-
Note (1)
-
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
-
Fan Pump
-
21.7 gal/min
-
Note (2)
-
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
-
Tilt Cylinder Flow - Rod End Flow
-
112 gal/min
-
Tilt Cylinder Flow - Head End Flow
-
63.4 gal/min
-
Lift Cylinder Relief Valve Setting
-
4061.1 psi
-
Tilt Cylinder Relief Valve Setting
-
3872.5 psi
-
Ripper - Lift - Relief Valve Setting
-
4061.1 psi
-
Ripper - Pitch - Relief Valve Setting
-
4061.1 psi
-
Tank Capacity
-
32.2 gal (US)
-
Cylinder Sizing - Blade Lift - Bore
-
5.5 in
-
Cylinder Sizing - Blade Tilt - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Lift - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Angle - Bore
-
7.1 in
-
Cylinder Sizing - Blade Lift - Stroke
-
65.1 in
-
Cylinder Sizing - Blade Tilt - Stroke
-
9.5 in
-
Cylinder Sizing - Ripper Shank Lift - Stroke
-
21.1 in
-
Cylinder Sizing - Ripper Shank Angle - Stroke
-
26 in
-
Note (3)
-
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
