|
|
|
|
Engine |
Engine Model |
C27 Cat® |
- |
Cat® C3.6 |
Rated Speed |
1800 r/min |
- |
- |
Gross Power - ISO 14396 |
752 HP |
- |
- |
Gross Power - SAE J1995 |
766 HP |
- |
- |
Net Power - SAE J1349 - Standard Ambient |
699 HP |
- |
- |
Net Power - SAE J1349 - High Ambient |
648 HP |
- |
- |
Bore |
5.4 in |
- |
- |
Stroke |
6 in |
- |
- |
Displacement |
1649.5 in³ |
- |
220 in³ |
Peak Torque - Speed |
2624 lb/ft |
- |
- |
Torque Rise |
18 % |
- |
- |
Emissions |
U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2 |
- |
- |
Power - Net |
- |
- |
92 HP |
Net Power - 2,200 rpm - SAE J1349 |
- |
- |
92 HP |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
- |
- |
92 HP |
Note (1) |
- |
- |
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Power Train |
- |
- |
Hydrostatic |
Note (2) |
- |
- |
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Operating Specifications |
Operating Weight |
165089 lb |
- |
- |
Blade Capacities |
15.9 - 30.7 m3 (20.7 - 40.2 yd3) |
- |
- |
Transmission |
Transmission Type |
Cat Planetary Power Shift |
Cat Planetary Power Shift |
- |
Converter Drive - Forward 1 |
4.5 mile/h |
- |
- |
Converter Drive - Forward 2 |
8.3 mile/h |
- |
- |
Converter Drive - Forward 3 |
14.2 mile/h |
- |
- |
Converter Drive - Reverse 1 |
4.9 mile/h |
- |
- |
Converter Drive - Reverse 2 |
9.1 mile/h |
- |
- |
Converter Drive - Reverse 3 |
15.5 mile/h |
- |
- |
Direct Drive - Forward 1 |
Lock-up disabled |
- |
- |
Direct Drive - Forward 2 |
8.5 mile/h |
- |
- |
Direct Drive - Forward 3 |
15.2 mile/h |
- |
- |
Direct Drive - Reverse 1 |
5.4 mile/h |
- |
- |
Direct Drive - Reverse 2 |
9.6 mile/h |
- |
- |
Direct Drive - Reverse 3 |
16.4 mile/h |
- |
- |
Forward - 1 |
- |
3.7 mile/h |
- |
Forward - 2 |
- |
6.5 mile/h |
- |
Forward - 3 |
- |
11.2 mile/h |
- |
Forward - 4 |
- |
19.4 mile/h |
- |
Reverse - 1 |
- |
4.2 mile/h |
- |
Reverse - 2 |
- |
7.3 mile/h |
- |
Reverse - 3 |
- |
12.8 mile/h |
- |
Reverse - 4 |
- |
22.1 mile/h |
- |
Drive Pumps |
- |
- |
1 |
Maximum Travel Speed - Forward |
- |
- |
5.6 mile/h |
Relief Valve Settings |
- |
- |
7033 psi |
Maximum Travel Speed - Reverse |
- |
- |
6.2 mile/h |
Track Motors |
- |
- |
2 |
Hydraulic System - Lift/Tilt |
Output at 2,000 rpm and 6900 kPa (1,000 psi) |
82 gal/min |
- |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
133 mm × 1535 mm (5.25 in × 60.4 in) |
120 mm × 915 mm (4.7 in × 36.0 in) |
- |
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke |
210 mm × 188 mm (8.25 in × 7.4 in) |
- |
- |
Relief Valve Setting - Bulldozer (Large Pump) |
2700 psi |
- |
- |
Relief Valve Setting - Tilt Cylinders (Small Pump) |
2920 psi |
- |
- |
Lift/Tilt System - Circuit |
- |
Pilot operated LS valve with EH |
- |
Lift/Tilt System |
- |
Variable displacement piston |
- |
Maximum Flow at 2,200 rpm |
- |
23.5 gal/min |
- |
Relief Valve Setting - Lift/Tilt |
- |
3190 psi |
- |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
- |
101.6 mm × 234 mm (4.0 in × 9.2 in) |
- |
Pilot System |
- |
Open center, fixed displacement gear |
- |
Pilot Relief Valve Setting |
- |
3046 psi |
- |
Hydraulic System - Steering |
Steering System - Circuit |
Pilot, load sensing |
Pilot, load sensing |
- |
Steering System - Pump |
Piston, variable displacement |
Variable displacement piston |
- |
Minimum Turning Radius - Over Blade |
34 ft |
- |
- |
Total Steering Angle |
35 ° |
72° |
- |
Maximum Flow |
94.3 gal/min |
- |
- |
Relief Valve Setting |
4500 psi |
- |
- |
Maximum Flow at 2,200 rpm |
- |
38.8 gal/min |
- |
Relief Valve Setting - Steering |
- |
4003 psi |
- |
Steering Cycle Times - High Idle |
- |
3 s |
- |
Steering Cycle Times - Low Idle |
- |
8.2 s |
- |
Service Refill Capacities |
Fuel Tank - Standard |
286.6 gal (US) |
- |
- |
Cooling System |
54.9 gal (US) |
- |
5 gal (US) |
Crankcase |
20 gal (US) |
- |
- |
Transmission |
29.1 gal (US) |
13.2 gal (US) |
- |
Differential - Final Drives - Front |
71.6 gal (US) |
17.2 gal (US) |
- |
Differential - Final Drives - Rear |
68.9 gal (US) |
17.2 gal (US) |
- |
Hydraulic System - Implement and Hydraulic Fan |
68.9 gal (US) |
- |
- |
Hydraulic System - Steering and Braking |
34.9 gal (US) |
- |
- |
Fuel Tank |
- |
132.1 gal (US) |
51.5 gal (US) |
Diesel Exhaust Fluid Tank |
- |
4.2 gal (US) |
- |
Cooling Systems - Tier 4 Final/EU Stage V |
- |
21.4 gal (US) |
- |
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA |
- |
19.3 gal (US) |
- |
Engine Crankcase |
- |
5.3 gal (US) |
- |
Hydraulic System - Implement/Steering |
- |
34.1 gal (US) |
- |
Hydraulic Tank Only |
- |
19.8 gal (US) |
- |
Crankcase - With Filter |
- |
- |
2.8 gal (US) |
Final Drive - Each - LGP |
- |
- |
2.6 gal (US) |
Transmission - Hydraulic Tank |
- |
- |
23.8 gal (US) |
Diesel Exhaust Fluid (DEF) Tank |
- |
- |
4.9 gal (US) |
Final Drives - Each Side |
- |
- |
2.6 gal (US) |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
- |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Axles |
Front |
Fixed |
Planetary – Fixed |
- |
Rear |
Trunnion |
Planetary – Oscillating |
- |
Oscillation Angle |
8.5 ° |
±10° |
- |
Brakes |
Brakes |
Meets ISO 3540:2011 |
- |
- |
Sound Performance - Standard |
Operator Sound Level (ISO 6396:2008) |
69 dB(A) |
- |
- |
Machine Sound Level (ISO 6395:2008) |
115 dB(A) |
- |
- |
Sound Performance - Suppression |
Operator Sound Level (ISO 6396:2008) |
69 dB(A) |
- |
- |
Machine Sound Level (ISO 6395:2008) |
113 dB(A) |
- |
- |
Cab |
ROPS/FOPS |
ISO 3471:2008 and ISO 3449:2005 Level II Standards |
- |
- |
FOPS |
- |
- |
ISO 3449:2005 Level II |
ROPS |
- |
- |
ISO 3471:2008 |
Dimensions (Approximate) |
Height - Top of ROPS |
17.2 ft |
- |
- |
Height - Top of Exhaust Pipe |
16.6 ft |
11.3 ft |
- |
Height - Top of Hood |
12.7 ft |
8.7 ft |
- |
Ground Clearance |
2 ft |
- |
- |
Centerline of Front Axle to Hitch |
7.5 ft |
5.5 ft |
- |
Centerline of Rear Axle to Edge of Bumper |
12.5 ft |
- |
- |
Wheel Base |
15.1 ft |
11 ft |
- |
Length - With Blade on Ground |
36.5 ft |
- |
- |
Height to Top of Beacon |
- |
13.1 ft |
- |
Height - Top of Cab |
- |
12.1 ft |
- |
Height to Top of Radiator Guard |
- |
8 ft |
- |
Ground Clearance to Hitch |
- |
1.4 ft |
- |
Ground Clearance to Transmission Guard |
- |
1.4 ft |
- |
Ground Clearance to Bottom of Bumper |
- |
2.3 ft |
- |
Centerline of Rear Axle to Bumper |
- |
6.5 ft |
- |
Width over Platform |
- |
10.3 ft |
- |
Overall Length to Front Tire |
- |
21 ft |
- |
Overall Machine Length with Straight Blade |
- |
23.6 ft |
- |
Overall Machine Length with Coal Blade |
- |
25.5 ft |
- |
Engine - Tier 4 Final/EU Stage V |
Engine Model |
- |
Cat C7.1 |
- |
Net Power (SAE J1349:2011) |
- |
249 HP |
- |
Net Power (ISO 9249:2007) |
- |
249 HP |
- |
Emissions |
- |
U.S. EPA Tier 4 Final/EU Stage V |
- |
Rated Speed |
- |
2200 r/min |
- |
Gross Power (SAE J1995:2014) |
- |
284 HP |
- |
Engine Power (ISO 14396:2002) |
- |
275 HP |
- |
Peak Torque - 1,400 rpm |
- |
902 lb/ft |
- |
Torque Rise |
- |
52% |
- |
Bore |
- |
4.1 in |
- |
Stroke |
- |
5.3 in |
- |
Displacement |
- |
427.8 in³ |
- |
High Idle Speed |
- |
2270 r/min |
- |
Low Idle Speed |
- |
800 r/min |
- |
Maximum Altitude without Derating |
- |
9842.5 ft |
- |
Note |
- |
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. |
- |
Operating Specifications - Tier 4 Final/EU Stage V |
Operating Weight |
- |
48526 lb |
- |
Scoops |
Chip Scoop Doze Capacity |
- |
37.9 yd³ |
- |
Chip Scoop Carry Capacity |
- |
19 yd³ |
- |
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Engine Model |
- |
Cat C7.1 |
- |
Emissions |
- |
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA |
- |
Rated Speed |
- |
2200 r/min |
- |
Net Power (SAE J1349:2011) |
- |
249 HP |
- |
Gross Power (SAE J1995:2014) |
- |
286 HP |
- |
Engine Power (ISO 14396:2002) |
- |
275 HP |
- |
Peak Torque - 1,400 rpm |
- |
749 lb/ft |
- |
Torque Rise |
- |
26% |
- |
Bore |
- |
4.1 in |
- |
Stroke |
- |
5.3 in |
- |
Displacement |
- |
427.8 in³ |
- |
High Idle Speed |
- |
2270 r/min |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA |
Operating Weight |
- |
47887 lb |
- |
Operating Specifications - Tier 4 Final/EU Stage V - Scoop |
Operating Weight |
- |
52280 lb |
- |
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop |
Operating Weight |
- |
51639 lb |
- |
Braking System |
Service Brakes |
- |
Single Disc Wet (enclosed) 4 WHL |
- |
Parking Brake |
- |
Drum and Shoe, Spring Applied, Hydraulic Released |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
111 dB(A) |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A) |
- |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
109 dB(A) |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
112 dB(A) |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression |
Operator Sound Level (ISO 6396) |
- |
70 dB(A) |
- |
Machine Sound Level (ISO 6395) |
- |
110 dB(A) |
- |
Note (1) |
- |
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (2) |
- |
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
- |
Note (3) |
- |
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. |
- |
Note (4) |
- |
The operator sound pressure level uncertainty is ± 2 dB(A). |
- |
Weights |
Operating Weight |
- |
- |
18382 lb |
Operating Weight - LGP |
- |
- |
19066 lb |
Note (2) |
- |
- |
For machine with ripper, add 554 kg (1,222 lb). |
Note (1) |
- |
- |
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Hydraulic Controls |
Pump Output |
- |
- |
17.2 gal/min |
Relief Valve Settings |
- |
- |
2988 psi |
Ripper |
Type |
- |
- |
Parallelogram |
Number of Shanks |
- |
- |
3 |
Height |
- |
- |
6.5 in |
Weight |
- |
- |
1222 lb |
Maximum Digging Depth |
- |
- |
13.3 in |
Maximum Ground Clearance Under Tip |
- |
- |
17.6 in |
Overall Width |
- |
- |
67.3 in |
Maximum Reach - Ground Line |
- |
- |
30.2 in |
Dimensions |
Length of Basic Dozer (without blade) - LGP |
- |
- |
129.5 in |
Width of Dozer (standard shoes, no blade) - Standard |
- |
- |
79.1 in |
Dozer Height - LGP |
- |
- |
108.9 in |
Dozer Height - Standard |
- |
- |
108.9 in |
Width of Dozer (standard shoes, no blade) - LGP |
- |
- |
92.9 in |
Length of Basic Dozer (without blade) - Standard |
- |
- |
129.5 in |
BLADE: Digging Depth - LGP |
- |
- |
23.2 in |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
- |
- |
52° to 58° |
BLADE: Blade Lift Height - LGP |
- |
- |
27.9 in |
BLADE: Blade Width - LGP |
- |
- |
124 in |
BLADE: Blade Width at Maximum Angle - LGP |
- |
- |
113.1 in |
Track Gauge - LGP |
- |
- |
67.9 in |
Ground Clearance - LGP |
- |
- |
13 in |
BLADE: Blade Height - LGP |
- |
- |
35.8 in |
Overall Length - With Blade - LGP |
- |
- |
168.2 in |
BLADE: Blade Capacity (SAE) - LGP |
- |
- |
2.42 yd³ |
BLADE: Maximum Tilt - LGP |
- |
- |
17.2 in |
BLADE: Maximum Angle (either side) - LGP |
- |
- |
25° |
BLADE: Maximum Angle (either side) - Standard |
- |
- |
25° |
Ground Clearance - Standard |
- |
- |
13 in |
Overall Length - With Blade - Standard |
- |
- |
168.5 in |
Note |
- |
- |
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in) |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard |
- |
- |
52° to 58° |
BLADE: Maximum Tilt - Standard |
- |
- |
15.2 in |
Track Gauge - Standard |
- |
- |
61 in |
BLADE: Digging Depth - Standard |
- |
- |
23.3 in |
BLADE: Blade Width - Standard |
- |
- |
109.5 in |
BLADE: Blade Lift Height - Standard |
- |
- |
29.3 in |
BLADE: Blade Capacity (SAE) - Standard |
- |
- |
2.59 yd³ |
BLADE: Blade Width at Maximum Angle - Standard |
- |
- |
100.1 in |
BLADE: Blade Height - Standard |
- |
- |
39.8 in |
Undercarriage |
Length - Track on Ground - LGP |
- |
- |
89 in |
Track Gauge |
- |
- |
61 in |
Number of Rollers - Each Side |
- |
- |
7 |
Track Gauge - LGP |
- |
- |
68 in |
Ground Pressure - LGP |
- |
- |
4.3 psi |
Shoe Width - Standard |
- |
- |
18 in |
Shoe Width - LGP |
- |
- |
25 in |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
- |
- |
43 |
Number of Shoes - Each Side - Abrasion Undercarriage |
- |
- |
38 |
Ground Pressure |
- |
- |
5.7 psi |
Length of Track on Ground |
- |
- |
89 in |
Retrieval Winch |
Maximum Line Speed - Full Drum |
- |
- |
79 ft/min |
Maximum Line Speed - Bare Drum |
- |
- |
50 ft/min |
Weight |
- |
- |
1747 lb |
Drum Capacity - Optional Cable |
- |
- |
195 ft |
Rope Diameter - Recommended |
- |
- |
0.63 in |
Winch Drive |
- |
- |
Hydraulic |
Rope Diameter - Optional |
- |
- |
0.75 in |
Drum Capacity - Recommended Cable |
- |
- |
277 ft |
Maximum Line Pull - Full Drum |
- |
- |
20350 lb |
Speed |
- |
- |
Variable |
Maximum Line Pull - Bare Drum |
- |
- |
32150 lb |
Control |
- |
- |
Hydraulic |
Overall width |
- |
- |
27.91 in |
Drum Width |
- |
- |
9.65 in |
Drum Diameter |
- |
- |
8 in |
Winch Length |
- |
- |
35.63 in |
Throat Clearance |
- |
- |
5.6 in |
High Performance Winch |
Maximum line pull – bare drum |
- |
- |
40000 lb |
Drum capacity – recommended cable |
- |
- |
371 ft |
Winch length |
- |
- |
27.76 in |
Overall width |
- |
- |
29.2 in |
Control |
- |
- |
Hydraulic |
Maximum line speed – bare drum |
- |
- |
131 ft/min |
Maximum line speed – full drum |
- |
- |
207 ft/min |
Drum width |
- |
- |
10.8 in |
Drum capacity – optional |
- |
- |
256 ft |
Throat clearance |
- |
- |
6.75 in |
Weight |
- |
- |
1345 lb |
Rope diameter – recommended |
- |
- |
0.63 in |
Speed |
- |
- |
Variable |
Maximum line pull – full drum |
- |
- |
25000 lb |
Drum diameter |
- |
- |
10 in |
Rope diameter – optional |
- |
- |
0.75 in |
Winch drive |
- |
- |
Hydrostatic |