CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    834 Wheel Dozer
    View Product
    814 Wheel Dozer
    View Product Remove
    D6 XE Dozer
    View Product Remove

    Engine
    Engine Model Cat® C18 - Cat C9.3B
    Rated Speed 1900 r/min - -
    Peak Power Speed 1500 r/min - -
    Gross Power - SAE J1995 562 HP - -
    Net Power - SAE J1349 496 HP - -
    Bore 5.7 in - -
    Stroke 7.2 in - -
    Displacement 1105 in³ - -
    Peak Torque - 1,300 rpm 2092 lb/ft - -
    Torque Rise 52 % - -
    Emissions U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. - U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V
    Power - Net - - 215 HP
    Net Power - Rated - ISO 9249/SAE J1349 - - 215 HP
    Net Power (Rated) - ISO 9249 (DIN) - - 219 mhp
    Note (1) - - Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a
    Note (2) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
    Note (3) - - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
    Note (4) - - Machine Build Number 20B

    Operating Specifications
    Operating Weight 105271 lb - -
    Blade Capacities 7.9 – 22.2 m3 (10.3 – 29.0 yd3) - -
    Coal Scoop Operating Weight 112428 lb - -
    Chip Scoop Operating Weight 112838 lb - -

    Transmission
    Transmission Type Cat planetary power shift Cat Planetary Power Shift -
    Forward - 1 4.2 mile/h 3.7 mile/h -
    Forward - 2 7.2 mile/h 6.5 mile/h -
    Forward - 3 12.6 mile/h 11.2 mile/h -
    Forward - 4 22 mile/h 19.4 mile/h -
    Reverse - 1 4.2 mile/h 4.2 mile/h -
    Reverse - 2 7.6 mile/h 7.3 mile/h -
    Reverse - 3 13.3 mile/h 12.8 mile/h -
    Direct Drive - Forward 1 Lock-up disabled - -
    Direct Drive - Forward 2 7.7 mile/h - -
    Direct Drive - Forward 3 13.7 mile/h - -
    Direct Drive - Forward 4 23.9 mile/h - -
    Direct Drive - Reverse 1 4.5 mile/h - -
    Direct Drive - Reverse 2 8.1 mile/h - -
    Direct Drive - Reverse 3 14.3 mile/h - -
    Reverse - 4 - 22.1 mile/h -
    Power Train - - Electric Drive

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Pilot operated LS valve with EH Pilot operated LS valve with EH -
    Lift/Tilt System Variable displacement piston Variable displacement piston -
    Maximum Flow at 1,900 rpm 153 gal/min - -
    Relief Valve Setting - Lift/Tilt 4641 psi 3190 psi -
    Cylinders, Double Acting - Lift, Bore and Stroke 139.75 mm × 1021 mm (5.5 in × 40.2 in) 120 mm × 915 mm (4.7 in × 36.0 in) -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke 140 mm × 230 mm (5.5 in × 9.1 in) 101.6 mm × 234 mm (4.0 in × 9.2 in) -
    Pilot System Variable displacement piston Open center, fixed displacement gear -
    Pilot Maximum Flow 13.7 gal/min - -
    Pilot Relief Valve Setting 580 psi 3046 psi -
    Maximum Flow at 2,200 rpm - 23.5 gal/min -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, load sensing Pilot, load sensing -
    Steering System - Pump Piston, variable displacement Variable displacement piston -
    Maximum Flow 65.8 gal/min - -
    Relief Valve Setting - Steering 3495 psi 4003 psi -
    Total Steering Angle 86 ° 72° -
    Steering Cycle Times - High Idle 3.1 s 3 s -
    Steering Cycle Times - Low Idle 5.7 s 8.2 s -
    Maximum Flow at 2,200 rpm - 38.8 gal/min -

    Service Refill Capacities
    Fuel Tank 209.5 gal (US) 132.1 gal (US) 90 gal (US)
    Cooling System 31.7 gal (US) - -
    Crankcase 15.9 gal (US) - -
    Diesel Exhaust Fluid Tank 8.7 gal (US) 4.2 gal (US) -
    Transmission 31.7 gal (US) 13.2 gal (US) -
    Hydraulic System Factory Fill 63.4 gal (US) - -
    Differential - Final Drives - Front 49.1 gal (US) 17.2 gal (US) -
    Differential - Final Drives - Rear 49.1 gal (US) 17.2 gal (US) -
    Hydraulic System - Tank Only 37 gal (US) - -
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - 19.3 gal (US) -
    Engine Crankcase - 5.3 gal (US) -
    Hydraulic System - Implement/Steering - 34.1 gal (US) -
    Hydraulic Tank Only - 19.8 gal (US) -
    DEF Tank - - 7.4 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.

    Axles
    Front Fixed Planetary – Fixed -
    Rear Trunnion Planetary – Oscillating -
    Oscillation Angle ±13° ±10° -

    Brakes
    Brakes ISO 3450: 2011 - -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) 72 dB(A) 70 dB(A) -
    Machine Sound Level (ISO 6395) 113 dB(A) 111 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) 72 dB(A) 70 dB(A) -
    Machine Sound Level (ISO 6395) 109 dB(A) 109 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Dimensions
    Height - Top of Exhaust Stack 15.9 ft - -
    Height - Top of Air Cleaner 12.8 ft - -
    Height - Top of Hood 10.9 ft - -
    Ground Clearance - Bumper 3.1 ft - -
    Centerline of Rear Axle to Edge of Bumper 10.5 ft - -
    Wheel Base 14.9 ft - -
    Length - Front of Tire 28.4 ft - -
    Length - Straight Blade on Ground 32.6 ft - -
    Centerline of Front Axle to Hitch 7.5 ft - -
    Length - Universal Blade on Ground 34.4 ft - -
    Ground Clearance 1.7 ft - -
    Height - Top of Cab 13.7 ft - -

    Scoops
    Chip Scoop Carry Capacity 35 yd³ 19 yd³ -
    Chip Scoop Doze Capacity 70 yd³ 37.9 yd³ -
    Coal Scoop Carry Capacity 30 yd³ - -
    Coal Scoop Doze Capacity 60 yd³ - -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - Cat C7.1 -
    Net Power (SAE J1349:2011) - 249 HP -
    Net Power (ISO 9249:2007) - 249 HP -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - 2200 r/min -
    Gross Power (SAE J1995:2014) - 284 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 902 lb/ft -
    Torque Rise - 52% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -
    Low Idle Speed - 800 r/min -
    Maximum Altitude without Derating - 9842.5 ft -
    Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - 48526 lb -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - Cat C7.1 -
    Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - 2200 r/min -
    Net Power (SAE J1349:2011) - 249 HP -
    Gross Power (SAE J1995:2014) - 286 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 749 lb/ft -
    Torque Rise - 26% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - 51639 lb -

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released -

    Dimensions (Approximate)
    Height to Top of Beacon - 13.1 ft -
    Height - Top of Cab - 12.1 ft -
    Height - Top of Exhaust Pipe - 11.3 ft -
    Height - Top of Hood - 8.7 ft -
    Height to Top of Radiator Guard - 8 ft -
    Ground Clearance to Hitch - 1.4 ft -
    Ground Clearance to Transmission Guard - 1.4 ft -
    Ground Clearance to Bottom of Bumper - 2.3 ft -
    Centerline of Rear Axle to Bumper - 6.5 ft -
    Centerline of Front Axle to Hitch - 5.5 ft -
    Wheel Base - 11 ft -
    Width over Platform - 10.3 ft -
    Overall Length to Front Tire - 21 ft -
    Overall Machine Length with Straight Blade - 23.6 ft -
    Overall Machine Length with Coal Blade - 25.5 ft -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Weights
    Operating Weight - - 51333 lb

    D6 XE Push Arm
    Operating Weight - - 49388 lb
    Ground Pressure - - 8 psi
    Width of Standard Shoe - - 24 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 7.5 yd³

    D6 XE LGP (30-in) Push Arm
    Operating Weight - - 51020 lb
    Ground Pressure - - 6.6 psi
    Width of Standard Shoe - - 30 in
    Blade - - Semi-Universal (SU)
    Blade Capacity - - 7.6 yd³

    D6 XE LGP (36-in) Push Arm
    Operating Weight - - 53315 lb
    Ground Pressure - - 5.3 psi
    Width of Standard Shoe - - 36 in
    Blade - - Straight
    Blade Capacity - - 5 yd³

    D6 XE VPAT
    Operating Weight - - 49708 lb
    Ground Pressure - - 7.2 psi
    Width of Standard Shoe - - 24 in
    Blade - - VPAT
    Blade Capacity - - 5.4 yd³

    D6 XE LGP (30-in) VPAT
    Operating Weight - - 51333 lb
    Ground Pressure - - 5.9 psi
    Width of Standard Shoe - - 30 in
    Blade - - VPAT
    Blade Capacity - - 5.9 yd³

    D6 XE LGP (36-in) VPAT
    Operating Weight - - 52512 lb
    Ground Pressure - - 5.1 psi
    Width of Standard Shoe - - 36 in
    Blade - - VPAT
    Blade Capacity - - 6.5 yd³

    Sustainability
    Recyclability - - 98%
    Add a Similar Product: