U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2.
-
-
Operating Specifications
Operating Weight
105271 lb
-
-
Blade Capacities
7.9 – 22.2 m3 (10.3 – 29.0 yd3)
-
-
Coal Scoop Operating Weight
112428 lb
-
-
Chip Scoop Operating Weight
112838 lb
-
-
Transmission
Transmission Type
Cat planetary power shift
Cat Planetary Power Shift
-
Forward - 1
4.2 mile/h
3.7 mile/h
-
Forward - 2
7.2 mile/h
6.5 mile/h
-
Forward - 3
12.6 mile/h
11.2 mile/h
-
Forward - 4
22 mile/h
19.4 mile/h
-
Reverse - 1
4.2 mile/h
4.2 mile/h
-
Reverse - 2
7.6 mile/h
7.3 mile/h
-
Reverse - 3
13.3 mile/h
12.8 mile/h
-
Direct Drive - Forward 1
Lock-up disabled
-
-
Direct Drive - Forward 2
7.7 mile/h
-
-
Direct Drive - Forward 3
13.7 mile/h
-
-
Direct Drive - Forward 4
23.9 mile/h
-
-
Direct Drive - Reverse 1
4.5 mile/h
-
-
Direct Drive - Reverse 2
8.1 mile/h
-
-
Direct Drive - Reverse 3
14.3 mile/h
-
-
Reverse - 4
-
22.1 mile/h
-
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Pilot operated LS valve with EH
Pilot operated LS valve with EH
-
Lift/Tilt System
Variable displacement piston
Variable displacement piston
-
Maximum Flow at 1,900 rpm
153 gal/min
-
-
Relief Valve Setting - Lift/Tilt
4641 psi
3190 psi
-
Cylinders, Double Acting - Lift, Bore and Stroke
139.75 mm × 1021 mm (5.5 in × 40.2 in)
120 mm × 915 mm (4.7 in × 36.0 in)
-
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
140 mm × 230 mm (5.5 in × 9.1 in)
101.6 mm × 234 mm (4.0 in × 9.2 in)
-
Pilot System
Variable displacement piston
Open center, fixed displacement gear
-
Pilot Maximum Flow
13.7 gal/min
-
-
Pilot Relief Valve Setting
580 psi
3046 psi
-
Maximum Flow at 2,200 rpm
-
23.5 gal/min
-
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Pilot, load sensing
-
Steering System - Pump
Piston, variable displacement
Variable displacement piston
-
Maximum Flow
65.8 gal/min
-
-
Relief Valve Setting - Steering
3495 psi
4003 psi
-
Total Steering Angle
86 °
72°
-
Steering Cycle Times - High Idle
3.1 s
3 s
-
Steering Cycle Times - Low Idle
5.7 s
8.2 s
-
Maximum Flow at 2,200 rpm
-
38.8 gal/min
-
Service Refill Capacities
Fuel Tank
209.5 gal (US)
132.1 gal (US)
-
Cooling System
31.7 gal (US)
-
-
Crankcase
15.9 gal (US)
-
-
Diesel Exhaust Fluid Tank
8.7 gal (US)
4.2 gal (US)
-
Transmission
31.7 gal (US)
13.2 gal (US)
-
Hydraulic System Factory Fill
63.4 gal (US)
-
-
Differential - Final Drives - Front
49.1 gal (US)
17.2 gal (US)
-
Differential - Final Drives - Rear
49.1 gal (US)
17.2 gal (US)
-
Hydraulic System - Tank Only
37 gal (US)
-
-
Cooling Systems - Tier 4 Final/EU Stage V
-
21.4 gal (US)
-
Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA
-
19.3 gal (US)
-
Engine Crankcase
-
5.3 gal (US)
-
Hydraulic System - Implement/Steering
-
34.1 gal (US)
-
Hydraulic Tank Only
-
19.8 gal (US)
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
-
Axles
Front
Fixed
Planetary – Fixed
-
Rear
Trunnion
Planetary – Oscillating
-
Oscillation Angle
±13°
±10°
-
Brakes
Brakes
ISO 3450: 2011
-
-
Sound Performance - Tier 4 Final/EU Stage V - Standard
Operator Sound Level (ISO 6396)
72 dB(A)
70 dB(A)
-
Machine Sound Level (ISO 6395)
113 dB(A)
111 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A)
-
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Operator Sound Level (ISO 6396)
72 dB(A)
70 dB(A)
-
Machine Sound Level (ISO 6395)
109 dB(A)
109 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A).
-
Dimensions
Height - Top of Exhaust Stack
15.9 ft
-
-
Height - Top of Air Cleaner
12.8 ft
-
-
Height - Top of Hood
10.9 ft
-
-
Ground Clearance - Bumper
3.1 ft
-
-
Centerline of Rear Axle to Edge of Bumper
10.5 ft
-
-
Wheel Base
14.9 ft
-
-
Length - Front of Tire
28.4 ft
-
-
Length - Straight Blade on Ground
32.6 ft
-
-
Centerline of Front Axle to Hitch
7.5 ft
-
-
Length - Universal Blade on Ground
34.4 ft
-
-
Ground Clearance
1.7 ft
-
-
Height - Top of Cab
13.7 ft
-
-
Scoops
Chip Scoop Carry Capacity
35 yd³
19 yd³
-
Chip Scoop Doze Capacity
70 yd³
37.9 yd³
-
Coal Scoop Carry Capacity
30 yd³
-
-
Coal Scoop Doze Capacity
60 yd³
-
-
Engine - Tier 4 Final/EU Stage V
Engine Model
-
Cat C7.1
-
Net Power (SAE J1349:2011)
-
249 HP
-
Net Power (ISO 9249:2007)
-
249 HP
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V
-
Rated Speed
-
2200 r/min
-
Gross Power (SAE J1995:2014)
-
284 HP
-
Engine Power (ISO 14396:2002)
-
275 HP
-
Peak Torque - 1,400 rpm
-
902 lb/ft
-
Torque Rise
-
52%
-
Bore
-
4.1 in
-
Stroke
-
5.3 in
-
Displacement
-
427.8 in³
-
High Idle Speed
-
2270 r/min
-
Low Idle Speed
-
800 r/min
-
Maximum Altitude without Derating
-
9842.5 ft
-
Note
-
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
-
Operating Specifications - Tier 4 Final/EU Stage V
Operating Weight
-
48526 lb
-
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Engine Model
-
Cat C7.1
-
Emissions
-
Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
-
Rated Speed
-
2200 r/min
-
Net Power (SAE J1349:2011)
-
249 HP
-
Gross Power (SAE J1995:2014)
-
286 HP
-
Engine Power (ISO 14396:2002)
-
275 HP
-
Peak Torque - 1,400 rpm
-
749 lb/ft
-
Torque Rise
-
26%
-
Bore
-
4.1 in
-
Stroke
-
5.3 in
-
Displacement
-
427.8 in³
-
High Idle Speed
-
2270 r/min
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
Operating Weight
-
47887 lb
-
Operating Specifications - Tier 4 Final/EU Stage V - Scoop
Operating Weight
-
52280 lb
-
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
Operating Weight
-
51639 lb
-
Braking System
Service Brakes
-
Single Disc Wet (enclosed) 4 WHL
-
Parking Brake
-
Drum and Shoe, Spring Applied, Hydraulic Released
-
Dimensions (Approximate)
Height to Top of Beacon
-
13.1 ft
-
Height - Top of Cab
-
12.1 ft
-
Height - Top of Exhaust Pipe
-
11.3 ft
-
Height - Top of Hood
-
8.7 ft
-
Height to Top of Radiator Guard
-
8 ft
-
Ground Clearance to Hitch
-
1.4 ft
-
Ground Clearance to Transmission Guard
-
1.4 ft
-
Ground Clearance to Bottom of Bumper
-
2.3 ft
-
Centerline of Rear Axle to Bumper
-
6.5 ft
-
Centerline of Front Axle to Hitch
-
5.5 ft
-
Wheel Base
-
11 ft
-
Width over Platform
-
10.3 ft
-
Overall Length to Front Tire
-
21 ft
-
Overall Machine Length with Straight Blade
-
23.6 ft
-
Overall Machine Length with Coal Blade
-
25.5 ft
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
Operator Sound Level (ISO 6396)
-
70 dB(A)
-
Machine Sound Level (ISO 6395)
-
112 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A).
-
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
Operator Sound Level (ISO 6396)
-
70 dB(A)
-
Machine Sound Level (ISO 6395)
-
110 dB(A)
-
Note (1)
-
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (2)
-
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
-
Note (3)
-
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
-
Note (4)
-
The operator sound pressure level uncertainty is ± 2 dB(A).
