Compare

Compare Equipment Go Back

Engine - U.S. EPA Tier 4 Final/EU Stage V
	D11 Dozer View Product	D10 Dozer View Product Remove	D9 Dozer View Product Remove
Engine Model	Cat® C32	Cat® C27	Cat® C18
Engine Power - Net SAE J1349/ISO 9249 - Forward	850 HP	-	-
Displacement	1959 in³	1648 in³	1106 in³
Engine Power - Net SAE J1349/ISO 9249 - Reverse	955 HP	-	-
Note (1)	*Excludes all fan losses.	*Excludes all fan losses.	All Engine ratings apply at 1,750 rpm.
Note (2)	Engine ratings apply at 1,800 rpm.	All Engine ratings apply at 1,800 rpm.	No derating required up to 2499 m (8,200 ft).
Note (3)	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	602 HP	-
Engine Power - Gross SAE J1995* - Forward	-	631 HP	-
Engine Power - Gross SAE J1995* - Reverse	-	766 HP	-
Engine Power - ISO 14396* - Forward	-	620 HP	-
Engine Power - ISO 14396* - Reverse	-	754 HP	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	722 HP	-
Stroke	-	6 in	7.2 in³
Bore	-	5.4 in	5.7 in³
Emissions	-	U.S. EPA Tier 4 Final/EU Stage V	U.S. EPA Tier 4 / EU Stage V
Note (4)	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-
Note (5)	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-
Engine Power - Gross SAE J1995	-	-	477 HP
Engine Power - ISO 14396	-	-	468 HP
Engine Power - Net SAE J1349/ISO 9249	-	-	440 HP
Weights
Operating Weight	229800 lb	154888 lb	110225 lb
Operating Weight - Carrydozer	250665 lb	-	-
Note (1)	D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.	D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Note (2)	D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.	D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Shipping Weight	-	111739 lb	84373 lb
Blades
Semi-Universal (SU)* Capacity	35.6 yd³	-	-
Semi-Universal (SU)* Width Over Endbits	219.8 in	-	-
U-Blade Capacity	45 yd³	-	-
U-Blade Width	249.6 in	-	-
Reclamation Universal - Blade capacity (SAE J1265)	55 yd³	-	-
Reclamation Universal - Width with blade (over end bits)	251.8 in	-	-
Carry Dozer - Blade capacity (SAE J1265)	57 yd³	-	-
Carry Dozer - Width with blade (over end bits)	263.9 in	-	-
10SU ABR - Capacity (SAE J1265)	-	24.2 yd³	-
10SU ABR - Width (over end bits)	-	194.5 in	-
10SU ABR - Height	-	83.5 in	-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	19.98 in	-
10SU ABR - Digging Depth - Blade Pitch: Nominal	-	25.23 in	-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	30.08 in³	-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	66.14 in	-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	53.86 in	-
10SU ABR - Ground Clearance - Maximum Tilt LH	-	56.3 in	-
10SU ABR - Ground Clearance - Maximum Tilt RH	-	56.3 in	-
10U ABR - Capacity (SAE J1265)	-	28.7 yd³	-
10U ABR - Width (over end bits)	-	207.1 in	-
10U ABR - Height	-	83.5 in	-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	19.98 in	-
10U ABR - Digging Depth - Blade Pitch: Nominal	-	60 in	-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	30.1 in	-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	66.1 in	-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	53.9 in	-
10U ABR - Ground Clearance - Maximum Tilt LH	-	60.8 in	-
10U ABR - Ground Clearance - Maximum Tilt RH	-	60.8 in	-
10U ABR - Weights - Blade Weight*	-	23585 lb	-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)	-	154888 lb	-
Note (1)	-	Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees	-
Note (2)	-	*Does not include hydraulic controls but includes blade cylinders, pusharms.	-
Note (3)	-	**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	Cat® C32	Cat® C27	-
Displacement	1959 in³	1648 in³	-
Engine Power - Net SAE J1349/ISO 9249 - Forward	850 HP	-	-
Engine Power - Net SAE J1349/ISO 9249 - Reverse	957 HP	-	-
Note (1)	*Excludes all fan losses.	*Excludes all fan losses.	-
Note (2)	Engine ratings apply at 1,800 rpm.	All Engine ratings apply at 1,800 rpm.	-
Note (3)	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	603 HP	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	722 HP	-
Engine Power - Gross SAE J1995* - Forward	-	631 HP	-
Engine Power - Gross SAE J1995* - Reverse	-	766 HP	-
Engine Power - ISO 14396* - Forward	-	622 HP	-
Engine Power - ISO 14396* - Reverse	-	756 HP	-
Bore	-	5.4 in	-
Stroke	-	6 in	-
Emissions	-	U.S. EPA Tier 2 Equivalent	-
Note (4)	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-
Note (5)	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-
Fuel Tank Capacities
Fuel Tank - Total Volume	500 gal (US)	335.2 gal (US)	-
Fuel Tank - Usable Volume	475 gal (US)	323.3 gal (US)	-
Hydraulic Controls
Pump Type	Variable displacement piston pump	Variable displacement piston	Piston-type geared to flywheel
Combined Pump Output - Implement	177 gal/min	-	-
Pump Output - Implement	-	112 gal/min	-
Note (1)	-	Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Fan Pump	-	21.7 gal/min	21 gal/min
Note (2)	-	Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Tilt Cylinder Flow - Rod End Flow	-	112 gal/min	53 gal/min
Tilt Cylinder Flow - Head End Flow	-	63.4 gal/min	53 gal/min
Lift Cylinder Relief Valve Setting	-	4061.1 psi	3800 lbf/in
Tilt Cylinder Relief Valve Setting	-	3872.5 psi	2799 psi
Ripper - Lift - Relief Valve Setting	-	4061.1 psi	3800 psi
Ripper - Pitch - Relief Valve Setting	-	4061.1 psi	3800 psi
Tank Capacity	-	32.2 gal (US)	24 gal/min
Cylinder Sizing - Blade Lift - Bore	-	5.5 in	-
Cylinder Sizing - Blade Tilt - Bore	-	8.3 in	-
Cylinder Sizing - Ripper Shank Lift - Bore	-	8.3 in	-
Cylinder Sizing - Ripper Shank Angle - Bore	-	7.1 in	-
Cylinder Sizing - Blade Lift - Stroke	-	65.1 in	-
Cylinder Sizing - Blade Tilt - Stroke	-	9.5 in	-
Cylinder Sizing - Ripper Shank Lift - Stroke	-	21.1 in	-
Cylinder Sizing - Ripper Shank Angle - Stroke	-	26 in	-
Note (3)	-	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Pump Output - Steering	-	-	96 gal/min
Steering System - Pressure	-	-	5874 psi
Undercarriage
Shoe Type	Extreme Service	Extreme Service (ES)	Extreme Service
Width - Shoe	28 in	24 in	24 in
Width - Shoe - CD	36 in	-	-
Shoes/Side	41	44	43
Grouser Height	4 in	3.7 in	3.3 in
Pitch	12.5 in	10.2 in	9.4 in
Ground Clearance*	30.6 in	-	-
Track Gauge	114 in	100.4 in	88.6 in
Length - Track on Ground	175 in	152.8 in	136.6 in
Ground Contact Area	9781 in²	7347 in²	45.6 ft²
Ground Contact Area - CD	12605 in²	-	-
Track Rollers/Side	8	8	8
Number of Carrier Rollers	1 per side (optional)	1 per side (optional)	1 per side (optional)
Ground Clearance	-	28.5 in	18.1 in
Transmission
1.0 Forward	2.5 mile/h	2.5 mile/h	2.2 mile/h
2.0 Forward	4.4 mile/h	4.5 mile/h	3.9 mile/h
3.0 Forward	7.6 mile/h	7.8 mile/h	6.8 mile/h
1.0 Reverse	3 mile/h	3.2 mile/h	2.7 mile/h
2.0 Reverse	5.3 mile/h	5.6 mile/h	4.8 mile/h
3.0 Reverse	9.1 mile/h	9.8 mile/h	8.4 mile/h
Drawbar Pull - 3 Forward	46250 ft·lbf	-	-
Drawbar Pull - 1 Forward	148200 ft·lbf	-	-
Drawbar Pull - 2 Forward	82300 ft·lbf	-	-
1.5 Forward	-	3.4 mile/h	-
2.5 Forward	-	6 mile/h	-
1.5 Reverse	-	4.2 mile/h	-
2.5 Reverse	-	7.5 mile/h	-
Transmission Clutch Diameter	-	17 in	-
Type	-	Planetary powershift	Planetary powershift
Ripper - Single Shank
Maximum penetration force * (shank vertical)	66000 lb	49233 lbf	35520 lbf
Maximum penetration depth (standard tip)	63.5 in	59.2 in	48.5 in
Pryout Force	148510 lb	-	74637 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	36 in	34.7 in
Weight	-	14209 lb	10701 lb
Note	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Number of Pockets	-	-	1
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110205 lb
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	66110 lb	53055 lbf	38667 lbf
Maximum penetration depth (standard tip)	85.5 in	78.3 in	68 in
Pryout Force	148510 lb	-	74412 lbf
Weight	-	14548 lb	10981 lb
Note	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	32.2 in
Number of Pockets	-	-	1
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110485 lb
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width	131.1 in	-	-
Maximum Penetration Force - Shank Vertical	77350 lb	-	34621 lbf
Maximum Penetration - Standard Tip	43.3 in	-	31.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth	145640 lb	-	81156 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	34.6 in
Number of Pockets	-	-	3
Weight	-	-	12136 lb
Total Operating Weight* - With SU-Blade and Ripper	-	-	111739 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)	149.8 in	-	-
Length with SU-Blade** - No rear attachment	345.1 in	-	-
Overall Length SU-Blade and SS Ripper**	421.7 in	-	-
Service Refill Capacities
Cooling System	46.8 gal (US)	-	-
Cooling System Refill - Tier 2 Equivalent Engine	41.7 gal (US)	-	-
Engine Crankcase	35.1 gal (US)	-	-
Power Train	120 gal (US)	-	-
Power Train - Refill Volume	103.3 gal (US)	-	-
Final Drive - Each	12.4 gal (US)	-	-
Roller Frames - Each	24.8 gal (US)	-	-
Hydraulic Tank	42.2 gal (US)	-	-
Hydraulic System Tank and Chassis	64.7 gal (US)	-	-
Hydraulic System Chassis + Blade and Ripper (Standard)	117.6 gal (US)	-	-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)	143.4 gal (US)	-	-
Standards
ROPS	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II	Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound (1)	The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).	Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Sound (2)	The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).	-	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Sound	-	Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Note	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and	-
Note (1)	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.	-
Note (2)	-	The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.	-
Note (3)	-	The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).	-
Dimensions - D11
Ground Clearance*	31.4 in	-	-
Track Gauge	114 in	-	-
Width at Outside of Track (710 mm Track Shoe)	142 in	-	-
Height (ROPS/canopy)*	185.9 in	-	-
Length of Track on Ground	175 in	-	-
Length with SU-Blade** - No rear attachment	337.8 in	-	-
Overall Length SU-Blade and SS Ripper**	414.4 in	-	-
Note	*Includes grouser height for total dimensions on hard surfaces.	-	-
Air Conditioning System
Note (1)	The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)	-	-
Air Conditioning	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
Steering and Brakes
Steering Type	-	Hydraulically Applied Multiple-Disc Steering Clutch	Differential
Brake Type	-	Spring Applied Multiple- Disc Brake	Spring Applied Wet Disc
Brake Diameter	-	15.4 in	15.5 in
Brake Count	-	10	8
Dimensions (Approximate)
Ground Clearance*	-	28.5 in	18.1 in
Track Gauge	-	100.4 in	88.6 in
Width - Without Trunnions - 610 mm/24 in ES	-	130.4 in	-
Width - Over Trunnions	-	148 in	130.3 in
Height - FOPS Cab*	-	162.8 in	150.4 in
Height - Top of Stack*	-	171.5 in	152.6 in
Height - ROPS/Canopy*	-	173.5 in	157.5 in
Note (1)	-	*Includes grouser height for total dimensions on hard surfaces.	*Includes grouser height for total dimensions on hard surfaces.
Length - Track on Ground	-	152.8 in	136.6 in
Overall Length - Basic Tractor	-	209.6 in	193.3 in
Length - With SU-Blade	-	292 in	-
Length - With U-Blade	-	305.1 in	274.3 in
Length - With Single-Shank Ripper	-	278.8 in	257 in
Length - With Multi-Shank Ripper	-	285.1 in	257.4 in
Overall Length - SU-Blade/SS Ripper	-	360.6 in	323.6 in
Width - Without Trunnions - Standard Shoe	-	-	113 in
Drawbar Height (Center of Clevis)*	-	-	30 in
Length - Basic Tractor - With Drawbar	-	-	206.4 in
Length - Basic Tractor - With Winch	-	-	218.3 in
Length - With SU-Blade**	-	-	259.9 in
FLUID CAPACITIES
Cooling System Refill – Tier 4 Final Engine	-	46.2 gal (US)	-
Engine Crankcase Sump	-	27.2 gal (US)	-
Power Train - Total Volume	-	81.4 gal (US)	-
Power Train - Refill Volume	-	74.8 gal (US)	-
Final Drives (each)	-	12.2 gal (US)	4 gal (US)
Track Roller Frames (each)	-	16.9 gal (US)	-
Pivot Shaft Oil	-	9.5 gal (US)	8 gal (US)
Hydraulic System Tank	-	32.2 gal (US)	24 gal (US)
Fuel Tank (Splash Fill)	-	-	254 gal (US)
DEF Tank (Tier 4 only)	-	-	9.5 gal (US)
Fuel Tank (Fast Fill)	-	-	248 gal (US)
Cooling System	-	-	21 gal (US)
Engine Crankcase*	-	-	10 gal (US)
Powertrain	-	-	40 gal (US)
Roller Frames (each)	-	-	12 gal (US)
Note	-	-	*With oil filters.
Note 2	-	-	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3	-	-	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4	-	-	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model	-	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249	-	-	452 HP
Bore	-	-	5.7 in³
Stroke	-	-	7.2 in
Displacement	-	-	1106 in³
Engine Power - Gross SAE J1995	-	-	487 HP
Engine Power - ISO 14396	-	-	479 HP
Emissions	-	-	U.S. EPA Tier 2 or Tier 3 equivalent
Note (1)	-	-	All engine ratings apply at 1,750 rpm.
Note (2)	-	-	No derating required up to 4267 m (14,000 ft) altitude.
Blade - Semi-Universal
Blade Capacity (SAE J1265)	-	-	17.8 yd³
Blade Width (over end bits)	-	-	171.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	37 in
Blade Weight	-	-	10587 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	110205 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade - Universal
Blade Capacity (SAE J1265)	-	-	21.7 yd³
Blade Width (over end bits)	-	-	184.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	39.9 in
Blade Weight	-	-	12016 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	111362 lb
Note	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Winches
Winch Model	-	-	PA 140VS
Weight*	-	-	3950 lb
Oil Capacity	-	-	4 gal (US)
Drum Width	-	-	12.6 in
Wire Cable Diameter - Recommended	-	-	1.13 in
Wire Cable Diameter - Optional	-	-	1.25 ft
Maximum Drum Capacity - Recommended Cable Length	-	-	257 in
Maximum Drum Capacity - Optional Cable Length	-	-	204 ft
Wire Cable Ferrule Size - Outside Diameter	-	-	2.4 in
Wire Cable Ferrule Size - Length	-	-	2.8 in
Note	-	-	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)	-	-	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.

Compare Equipment Go Back

D11 Dozer

D10 Dozer

D9 Dozer

Engine - U.S. EPA Tier 4 Final/EU Stage V

Weights

Blades

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Hydraulic Controls

Undercarriage

Transmission

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Ripper - Multi-Shank, Adjustable Parallelogram

Dimensions - D11 Carrydozer

Service Refill Capacities

Standards

Dimensions - D11

Air Conditioning System

Steering and Brakes

Dimensions (Approximate)

FLUID CAPACITIES

Engine - U.S. EPA Tier 2/3 Equivalent

Blade - Semi-Universal

Blade - Universal

Winches

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us