Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
602 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
620 HP
-
Engine Power - ISO 14396* - Reverse
-
754 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Stroke
-
6 in
-
Bore
-
5.4 in
-
Emissions
-
U.S. EPA Tier 4 Final/EU Stage V
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Weights
Operating Weight
229800 lb
154888 lb
-
Operating Weight - Carrydozer
250665 lb
-
-
Note (1)
D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Note (2)
D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.
Reclamation Universal - Width with blade (over end bits)
251.8 in
-
-
Carry Dozer - Blade capacity (SAE J1265)
57 yd³
-
-
Carry Dozer - Width with blade (over end bits)
263.9 in
-
-
10SU ABR - Capacity (SAE J1265)
-
24.2 yd³
-
10SU ABR - Width (over end bits)
-
194.5 in
-
10SU ABR - Height
-
83.5 in
-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10SU ABR - Digging Depth - Blade Pitch: Nominal
-
25.23 in
-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.08 in³
-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.14 in
-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.86 in
-
10SU ABR - Ground Clearance - Maximum Tilt LH
-
56.3 in
-
10SU ABR - Ground Clearance - Maximum Tilt RH
-
56.3 in
-
10U ABR - Capacity (SAE J1265)
-
28.7 yd³
-
10U ABR - Width (over end bits)
-
207.1 in
-
10U ABR - Height
-
83.5 in
-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
-
19.98 in
-
10U ABR - Digging Depth - Blade Pitch: Nominal
-
60 in
-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
-
30.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
-
66.1 in
-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
-
53.9 in
-
10U ABR - Ground Clearance - Maximum Tilt LH
-
60.8 in
-
10U ABR - Ground Clearance - Maximum Tilt RH
-
60.8 in
-
10U ABR - Weights - Blade Weight*
-
23585 lb
-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
-
154888 lb
-
Note (1)
-
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees
-
Note (2)
-
*Does not include hydraulic controls but includes blade cylinders, pusharms.
-
Note (3)
-
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model
Cat® C32
Cat® C27
-
Displacement
1959 in³
1648 in³
-
Engine Power - Net SAE J1349/ISO 9249 - Forward
850 HP
-
-
Engine Power - Net SAE J1349/ISO 9249 - Reverse
957 HP
-
-
Note (1)
*Excludes all fan losses.
*Excludes all fan losses.
-
Note (2)
Engine ratings apply at 1,800 rpm.
All Engine ratings apply at 1,800 rpm.
-
Note (3)
Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
-
603 HP
-
Engine Power - Net SAE J1349/ISO 9249** - Reverse
-
722 HP
-
Engine Power - Gross SAE J1995* - Forward
-
631 HP
-
Engine Power - Gross SAE J1995* - Reverse
-
766 HP
-
Engine Power - ISO 14396* - Forward
-
622 HP
-
Engine Power - ISO 14396* - Reverse
-
756 HP
-
Bore
-
5.4 in
-
Stroke
-
6 in
-
Emissions
-
U.S. EPA Tier 2 Equivalent
-
Note (4)
-
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).
-
Note (5)
-
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.
-
Fuel Tank Capacities
Fuel Tank - Total Volume
500 gal (US)
335.2 gal (US)
-
Fuel Tank - Usable Volume
475 gal (US)
323.3 gal (US)
-
Hydraulic Controls
Pump Type
Variable displacement piston pump
Variable displacement piston
-
Combined Pump Output - Implement
177 gal/min
-
-
Pump Output - Implement
-
112 gal/min
-
Note (1)
-
Implement Pump output measured are 2,010 engine rpm and
7000 kPa (1,015 psi).
-
Fan Pump
-
21.7 gal/min
-
Note (2)
-
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).
-
Tilt Cylinder Flow - Rod End Flow
-
112 gal/min
-
Tilt Cylinder Flow - Head End Flow
-
63.4 gal/min
-
Lift Cylinder Relief Valve Setting
-
4061.1 psi
-
Tilt Cylinder Relief Valve Setting
-
3872.5 psi
-
Ripper - Lift - Relief Valve Setting
-
4061.1 psi
-
Ripper - Pitch - Relief Valve Setting
-
4061.1 psi
-
Tank Capacity
-
32.2 gal (US)
-
Cylinder Sizing - Blade Lift - Bore
-
5.5 in
-
Cylinder Sizing - Blade Tilt - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Lift - Bore
-
8.3 in
-
Cylinder Sizing - Ripper Shank Angle - Bore
-
7.1 in
-
Cylinder Sizing - Blade Lift - Stroke
-
65.1 in
-
Cylinder Sizing - Blade Tilt - Stroke
-
9.5 in
-
Cylinder Sizing - Ripper Shank Lift - Stroke
-
21.1 in
-
Cylinder Sizing - Ripper Shank Angle - Stroke
-
26 in
-
Note (3)
-
Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
-
Undercarriage
Shoe Type
Extreme Service
Extreme Service (ES)
-
Width - Shoe
28 in
24 in
-
Width - Shoe - CD
36 in
-
-
Shoes/Side
41
44
-
Grouser Height
4 in
3.7 in
-
Pitch
12.5 in
10.2 in
-
Ground Clearance*
30.6 in
-
-
Track Gauge
114 in
100.4 in
-
Length - Track on Ground
175 in
152.8 in
-
Ground Contact Area
9781 in²
7347 in²
-
Ground Contact Area - CD
12605 in²
-
-
Track Rollers/Side
8
8
-
Number of Carrier Rollers
1 per side (optional)
1 per side (optional)
-
Ground Clearance
-
28.5 in
-
Transmission
1.0 Forward
2.5 mile/h
2.5 mile/h
-
2.0 Forward
4.4 mile/h
4.5 mile/h
-
3.0 Forward
7.6 mile/h
7.8 mile/h
-
1.0 Reverse
3 mile/h
3.2 mile/h
-
2.0 Reverse
5.3 mile/h
5.6 mile/h
-
3.0 Reverse
9.1 mile/h
9.8 mile/h
-
Drawbar Pull - 3 Forward
46250 ft·lbf
-
-
Drawbar Pull - 1 Forward
148200 ft·lbf
-
-
Drawbar Pull - 2 Forward
82300 ft·lbf
-
-
1.5 Forward
-
3.4 mile/h
-
2.5 Forward
-
6 mile/h
-
1.5 Reverse
-
4.2 mile/h
-
2.5 Reverse
-
7.5 mile/h
-
Transmission Clutch Diameter
-
17 in
-
Type
-
Planetary powershift
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
66000 lb
49233 lbf
-
Maximum penetration depth (standard tip)
63.5 in
59.2 in
-
Pryout Force
148510 lb
-
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
-
36 in
-
Weight
-
14209 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
66110 lb
53055 lbf
-
Maximum penetration depth (standard tip)
85.5 in
78.3 in
-
Pryout Force
148510 lb
-
-
Weight
-
14548 lb
-
Note
-
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width
131.1 in
-
-
Maximum Penetration Force - Shank Vertical
77350 lb
-
-
Maximum Penetration - Standard Tip
43.3 in
-
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
145640 lb
-
-
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)
149.8 in
-
-
Length with SU-Blade** - No rear attachment
345.1 in
-
-
Overall Length SU-Blade and SS Ripper**
421.7 in
-
-
Service Refill Capacities
Cooling System
46.8 gal (US)
-
-
Cooling System Refill - Tier 2 Equivalent Engine
41.7 gal (US)
-
-
Engine Crankcase
35.1 gal (US)
-
-
Power Train
120 gal (US)
-
-
Power Train - Refill Volume
103.3 gal (US)
-
-
Final Drive - Each
12.4 gal (US)
-
-
Roller Frames - Each
24.8 gal (US)
-
-
Hydraulic Tank
42.2 gal (US)
-
-
Hydraulic System Tank and Chassis
64.7 gal (US)
-
-
Hydraulic System Chassis + Blade and Ripper (Standard)
117.6 gal (US)
-
-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)
143.4 gal (US)
-
-
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.
-
FOPS
Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
-
Sound (1)
The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
-
Sound (2)
The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).
-
-
Sound
-
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)
-
Note
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and
-
Note (1)
-
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine
cooling fan speeds.
-
Note (2)
-
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.
-
Note (3)
-
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).
-
Dimensions - D11
Ground Clearance*
31.4 in
-
-
Track Gauge
114 in
-
-
Width at Outside of Track (710 mm Track Shoe)
142 in
-
-
Height (ROPS/canopy)*
185.9 in
-
-
Length of Track on Ground
175 in
-
-
Length with SU-Blade** - No rear attachment
337.8 in
-
-
Overall Length SU-Blade and SS Ripper**
414.4 in
-
-
Note
*Includes grouser height for total dimensions on hard surfaces.
-
-
Air Conditioning System
Note (1)
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)
-
-
Air Conditioning
-
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
