|
|
|
|
Engine - U.S. EPA Tier 2/3 Equivalent |
Engine Model |
Cat® C18 |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 |
452 HP |
- |
- |
Bore |
5.7 in³ |
- |
- |
Stroke |
7.2 in |
- |
- |
Displacement |
1106 in³ |
- |
- |
Engine Power - Gross SAE J1995 |
487 HP |
- |
- |
Engine Power - ISO 14396 |
479 HP |
- |
- |
Emissions |
U.S. EPA Tier 2 or Tier 3 equivalent |
- |
- |
Note (1) |
All engine ratings apply at 1,750 rpm. |
- |
- |
Note (2) |
No derating required up to 4267 m (14,000 ft) altitude. |
- |
- |
Weights |
Operating Weight |
110225 lb |
224647 lb |
- |
Shipping Weight |
84373 lb |
- |
- |
Note (1) |
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. |
- |
- |
Note (2) |
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
- |
- |
Undercarriage |
Shoe Type |
Extreme Service |
- |
- |
Width - Shoe |
24 in |
- |
- |
Shoes/Side |
43 |
- |
- |
Grouser Height |
3.3 in |
- |
- |
Pitch |
9.4 in |
- |
- |
Ground Clearance |
18.1 in |
- |
- |
Track Gauge |
88.6 in |
- |
- |
Length - Track on Ground |
136.6 in |
- |
- |
Ground Contact Area |
45.6 ft² |
- |
- |
Track Rollers/Side |
8 |
- |
- |
Number of Carrier Rollers |
1 per side (optional) |
- |
- |
Standards |
ROPS |
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. |
- |
- |
FOPS |
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. |
- |
- |
Sound |
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling |
- |
- |
Sound (1) |
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c |
- |
- |
Sound (2) |
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. |
- |
- |
Steering and Brakes |
Steering Type |
Differential |
- |
- |
Brake Type |
Spring Applied Wet Disc |
- |
- |
Brake Diameter |
15.5 in |
- |
- |
Brake Count |
8 |
- |
- |
Engine - U.S. EPA Tier 4 Final/EU Stage V |
Engine Model |
Cat® C18 |
- |
- |
Bore |
5.7 in³ |
- |
- |
Stroke |
7.2 in³ |
- |
- |
Displacement |
1106 in³ |
- |
- |
Engine Power - Gross SAE J1995 |
477 HP |
- |
- |
Engine Power - ISO 14396 |
468 HP |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 |
440 HP |
- |
- |
Emissions |
U.S. EPA Tier 4 / EU Stage V |
- |
- |
Note (1) |
All Engine ratings apply at 1,750 rpm. |
- |
- |
Note (2) |
No derating required up to 2499 m (8,200 ft). |
- |
- |
FLUID CAPACITIES |
Fuel Tank (Splash Fill) |
254 gal (US) |
- |
- |
DEF Tank (Tier 4 only) |
9.5 gal (US) |
- |
- |
Fuel Tank (Fast Fill) |
248 gal (US) |
- |
- |
Cooling System |
21 gal (US) |
- |
- |
Engine Crankcase* |
10 gal (US) |
- |
- |
Powertrain |
40 gal (US) |
- |
- |
Final Drives (each) |
4 gal (US) |
- |
- |
Roller Frames (each) |
12 gal (US) |
- |
- |
Pivot Shaft Oil |
8 gal (US) |
- |
- |
Hydraulic System Tank |
24 gal (US) |
- |
- |
Note |
*With oil filters. |
- |
- |
Note 2 |
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or |
- |
- |
Note 3 |
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. |
- |
- |
Note 4 |
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
- |
- |
Hydraulic Controls |
Pump Type |
Piston-type geared to flywheel |
- |
- |
Pump Output - Steering |
96 gal/min |
- |
- |
Fan Pump |
21 gal/min |
- |
- |
Tilt Cylinder Flow - Rod End Flow |
53 gal/min |
- |
- |
Tilt Cylinder Flow - Head End Flow |
53 gal/min |
- |
- |
Lift Cylinder Relief Valve Setting |
3800 lbf/in |
- |
- |
Tilt Cylinder Relief Valve Setting |
2799 psi |
- |
- |
Ripper - Lift - Relief Valve Setting |
3800 psi |
- |
- |
Ripper - Pitch - Relief Valve Setting |
3800 psi |
- |
- |
Steering System - Pressure |
5874 psi |
- |
- |
Tank Capacity |
24 gal/min |
- |
- |
Note (1) |
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). |
- |
- |
Note (2) |
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). |
- |
- |
Note (3) |
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) |
- |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. |
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Transmission |
1.0 Forward |
2.2 mile/h |
- |
- |
2.0 Forward |
3.9 mile/h |
- |
- |
3.0 Forward |
6.8 mile/h |
- |
- |
1.0 Reverse |
2.7 mile/h |
- |
- |
2.0 Reverse |
4.8 mile/h |
- |
- |
3.0 Reverse |
8.4 mile/h |
- |
- |
Type |
Planetary powershift |
- |
- |
Transmission Type |
- |
Cat Planetary Power Shift |
Cat planetary power shift |
Converter Drive - Forward 1 |
- |
4.4 mile/h |
- |
Converter Drive - Forward 2 |
- |
7.7 mile/h |
- |
Converter Drive - Forward 3 |
- |
13.2 mile/h |
- |
Converter Drive - Reverse 1 |
- |
4.8 mile/h |
- |
Converter Drive - Reverse 2 |
- |
8.4 mile/h |
- |
Converter Drive - Reverse 3 |
- |
14.6 mile/h |
- |
Direct Drive - Forward 1 |
- |
Lock-up disabled |
Lock-up disabled |
Direct Drive - Forward 2 |
- |
8.1 mile/h |
7.7 mile/h |
Direct Drive - Forward 3 |
- |
14.2 mile/h |
13.7 mile/h |
Direct Drive - Reverse 1 |
- |
5 mile/h |
4.5 mile/h |
Direct Drive - Reverse 2 |
- |
8.9 mile/h |
8.1 mile/h |
Direct Drive - Reverse 3 |
- |
15.6 mile/h |
14.3 mile/h |
Note |
- |
Travel speeds based on 45/65-45 L-5 46 ply tires. |
- |
Forward - 1 |
- |
- |
4.2 mile/h |
Forward - 2 |
- |
- |
7.2 mile/h |
Forward - 3 |
- |
- |
12.6 mile/h |
Forward - 4 |
- |
- |
22 mile/h |
Reverse - 1 |
- |
- |
4.2 mile/h |
Reverse - 2 |
- |
- |
7.6 mile/h |
Reverse - 3 |
- |
- |
13.3 mile/h |
Direct Drive - Forward 4 |
- |
- |
23.9 mile/h |
Blade - Semi-Universal |
Blade Capacity (SAE J1265) |
17.8 yd³ |
- |
- |
Blade Width (over end bits) |
171.3 in |
- |
- |
Blade Height |
76.1 in |
- |
- |
Maximum Digging Depth |
23.9 in |
- |
- |
Ground Clearance at Full Lift |
56 in |
- |
- |
Maximum Tilt |
37 in |
- |
- |
Blade Weight |
10587 lb |
- |
- |
Total Operating Weight* (with blade and single-shank ripper) |
110205 lb |
- |
- |
Note |
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Blade - Universal |
Blade Capacity (SAE J1265) |
21.7 yd³ |
- |
- |
Blade Width (over end bits) |
184.3 in |
- |
- |
Blade Height |
76.1 in |
- |
- |
Maximum Digging Depth |
23.9 in |
- |
- |
Ground Clearance at Full Lift |
56 in |
- |
- |
Maximum Tilt |
39.9 in |
- |
- |
Blade Weight |
12016 lb |
- |
- |
Total Operating Weight* (with blade and single-shank ripper) |
111362 lb |
- |
- |
Note |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Ripper - Single Shank |
Maximum penetration force * (shank vertical) |
35520 lbf |
- |
- |
Maximum penetration depth (standard tip) |
48.5 in |
- |
- |
Pryout Force |
74637 lbf |
- |
- |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
34.7 in |
- |
- |
Number of Pockets |
1 |
- |
- |
Weight |
10701 lb |
- |
- |
Total Operating Weight* (with SU Blade and noted ripper) |
110205 lb |
- |
- |
Note |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type. |
- |
- |
Ripper - Single Shank, Deep Ripping |
Maximum penetration force * (shank vertical) |
38667 lbf |
- |
- |
Maximum penetration depth (standard tip) |
68 in |
- |
- |
Pryout Force |
74412 lbf |
- |
- |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
32.2 in |
- |
- |
Number of Pockets |
1 |
- |
- |
Weight |
10981 lb |
- |
- |
Total Operating Weight* (with SU Blade and noted ripper) |
110485 lb |
- |
- |
Note |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Ripper - Multi-Shank, Adjustable Parallelogram |
Maximum Penetration Force - Shank Vertical |
34621 lbf |
- |
- |
Maximum Penetration - Standard Tip |
31.4 in |
- |
- |
Pry-Out Force - Multi-Shank Ripper with One Tooth |
81156 lbf |
- |
- |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
34.6 in |
- |
- |
Number of Pockets |
3 |
- |
- |
Weight |
12136 lb |
- |
- |
Total Operating Weight* - With SU-Blade and Ripper |
111739 lb |
- |
- |
Note |
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Dimensions (Approximate) |
Ground Clearance* |
18.1 in |
- |
- |
Track Gauge |
88.6 in |
- |
- |
Width - Without Trunnions - Standard Shoe |
113 in |
- |
- |
Width - Over Trunnions |
130.3 in |
- |
- |
Height - FOPS Cab* |
150.4 in |
- |
- |
Height - Top of Stack* |
152.6 in |
- |
- |
Height - ROPS/Canopy* |
157.5 in |
- |
- |
Drawbar Height (Center of Clevis)* |
30 in |
- |
- |
Length - Track on Ground |
136.6 in |
- |
- |
Overall Length - Basic Tractor |
193.3 in |
- |
- |
Length - Basic Tractor - With Drawbar |
206.4 in |
- |
- |
Length - Basic Tractor - With Winch |
218.3 in |
- |
- |
Length - With SU-Blade** |
259.9 in |
- |
- |
Length - With U-Blade |
274.3 in |
- |
- |
Length - With Single-Shank Ripper |
257 in |
- |
- |
Length - With Multi-Shank Ripper |
257.4 in |
- |
- |
Overall Length - SU-Blade/SS Ripper |
323.6 in |
- |
- |
Note (1) |
*Includes grouser height for total dimensions on hard surfaces. |
- |
- |
Height - Top of ROPS |
- |
18.25 ft |
- |
Height - Top of Exhaust Pipe |
- |
17.17 ft |
- |
Height - Top of Hood |
- |
13 ft |
- |
Ground Clearance |
- |
27 in |
- |
Centerline of Front Axle to Hitch |
- |
9.67 ft |
- |
Centerline of Rear Axle to Edge of Bumper |
- |
13.75 ft |
- |
Wheel Base |
- |
19.25 ft |
- |
Length - With Blade on Ground |
- |
44 ft |
- |
Winches |
Winch Model |
PA 140VS |
- |
- |
Weight* |
3950 lb |
- |
- |
Oil Capacity |
4 gal (US) |
- |
- |
Drum Width |
12.6 in |
- |
- |
Wire Cable Diameter - Recommended |
1.13 in |
- |
- |
Wire Cable Diameter - Optional |
1.25 ft |
- |
- |
Maximum Drum Capacity - Recommended Cable Length |
257 in |
- |
- |
Maximum Drum Capacity - Optional Cable Length |
204 ft |
- |
- |
Wire Cable Ferrule Size - Outside Diameter |
2.4 in |
- |
- |
Wire Cable Ferrule Size - Length |
2.8 in |
- |
- |
Note |
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
- |
- |
Note (2) |
Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
- |
- |
Engine |
Engine Model |
- |
Cat C32B |
Cat® C18 |
Gross Power |
- |
907 HP |
- |
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 |
- |
900 HP |
- |
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 |
- |
814 HP |
- |
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 |
- |
907 HP |
- |
Emissions (Tier 2 Equivalent): Net Power ISO - 9249 |
- |
823 HP |
- |
Rated Speed |
- |
1750 r/min |
1900 r/min |
Bore |
- |
5.7 in |
5.7 in |
Stroke |
- |
6.4 in |
7.2 in |
Displacement |
- |
1958 in² |
1105 in³ |
Peak Torque - 1,200 rpm |
- |
3139 lb/ft |
- |
Torque Rise |
- |
30 % |
52 % |
Note (1) |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
- |
Note (2) |
- |
Net torque rise meets SAE J139. |
- |
Note (3) |
- |
No engine derating required up to 3050 m (10,000 ft) altitude. |
- |
Peak Power Speed |
- |
- |
1500 r/min |
Gross Power - SAE J1995 |
- |
- |
562 HP |
Net Power - SAE J1349 |
- |
- |
496 HP |
Peak Torque - 1,300 rpm |
- |
- |
2092 lb/ft |
Emissions |
- |
- |
U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. |
Hydraulic System - Lift/Tilt |
Output at 1,850 rpm and 6900 kPa (1,000 psi) |
- |
161 gal/min |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
177 mm × 1760 mm (0.58 ft × 5.8 ft) |
139.75 mm × 1021 mm (5.5 in × 40.2 in) |
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke |
- |
267 mm × 286 mm (0.88 ft × 0.94 ft) |
- |
Lift/Tilt System - Circuit |
- |
- |
Pilot operated LS valve with EH |
Lift/Tilt System |
- |
- |
Variable displacement piston |
Maximum Flow at 1,900 rpm |
- |
- |
153 gal/min |
Relief Valve Setting - Lift/Tilt |
- |
- |
4641 psi |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
- |
- |
140 mm × 230 mm (5.5 in × 9.1 in) |
Pilot System |
- |
- |
Variable displacement piston |
Pilot Maximum Flow |
- |
- |
13.7 gal/min |
Pilot Relief Valve Setting |
- |
- |
580 psi |
Service Refill Capacities |
Fuel Tank - Standard |
- |
413 gal (US) |
- |
Cooling System |
- |
53 gal (US) |
31.7 gal (US) |
Crankcase |
- |
32 gal (US) |
15.9 gal (US) |
Transmission |
- |
45 gal (US) |
31.7 gal (US) |
Differential - Final Drives - Front |
- |
98 gal (US) |
49.1 gal (US) |
Differential - Final Drives - Rear |
- |
90 gal (US) |
49.1 gal (US) |
Hydraulic System - Steering and Engine Cooling Fan - Tank Only |
- |
77 gal (US) |
- |
Note (1) |
- |
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo |
- |
Fuel Tank |
- |
- |
209.5 gal (US) |
Diesel Exhaust Fluid Tank |
- |
- |
8.7 gal (US) |
Hydraulic System Factory Fill |
- |
- |
63.4 gal (US) |
Hydraulic System - Tank Only |
- |
- |
37 gal (US) |
Axles |
Front |
- |
Fixed |
Fixed |
Rear |
- |
Trunnion |
Trunnion |
Oscillation Angle |
- |
- |
±13° |
Brakes |
Brakes |
- |
Meets ISO 3540:2011 |
ISO 3450: 2011 |
Blades |
Blade Capacities |
- |
30.5 to 44.8 m3 (40 to 58.6 yd3) |
- |
Hydraulic System - Steering |
Steering System - Pump |
- |
Piston, variable displacement |
Piston, variable displacement |
Minimum Turning Radius - Over Blade |
- |
31 ft |
- |
Steering System - Circuit |
- |
Pilot, load sensing |
Pilot, load sensing |
Total Steering Angle |
- |
86 degrees |
86 ° |
Relief Valve Setting |
- |
5004 psi |
- |
Maximum Flow |
- |
- |
65.8 gal/min |
Relief Valve Setting - Steering |
- |
- |
3495 psi |
Steering Cycle Times - High Idle |
- |
- |
3.1 s |
Steering Cycle Times - Low Idle |
- |
- |
5.7 s |
Operating Specifications |
Operating Weight |
- |
224647 lb |
105271 lb |
Blade Capacities |
- |
- |
7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
Coal Scoop Operating Weight |
- |
- |
112428 lb |
Chip Scoop Operating Weight |
- |
- |
112838 lb |
Sound Performance Levels |
Sound Performance |
- |
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was |
- |
Cab |
ROPS/FOPS |
- |
ISO 3471:2008 and ISO 3449:2005 Level II Standards |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
Machine Sound Level (ISO 6395) |
- |
- |
113 dB(A) |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
- |
- |
72 dB(A) |
Machine Sound Level (ISO 6395) |
- |
- |
109 dB(A) |
Dimensions |
Height - Top of Exhaust Stack |
- |
- |
15.9 ft |
Height - Top of Air Cleaner |
- |
- |
12.8 ft |
Height - Top of Hood |
- |
- |
10.9 ft |
Ground Clearance - Bumper |
- |
- |
3.1 ft |
Centerline of Rear Axle to Edge of Bumper |
- |
- |
10.5 ft |
Wheel Base |
- |
- |
14.9 ft |
Length - Front of Tire |
- |
- |
28.4 ft |
Length - Straight Blade on Ground |
- |
- |
32.6 ft |
Centerline of Front Axle to Hitch |
- |
- |
7.5 ft |
Length - Universal Blade on Ground |
- |
- |
34.4 ft |
Ground Clearance |
- |
- |
1.7 ft |
Height - Top of Cab |
- |
- |
13.7 ft |
Scoops |
Chip Scoop Carry Capacity |
- |
- |
35 yd³ |
Chip Scoop Doze Capacity |
- |
- |
70 yd³ |
Coal Scoop Carry Capacity |
- |
- |
30 yd³ |
Coal Scoop Doze Capacity |
- |
- |
60 yd³ |