No derating required up to 4267 m (14,000 ft) altitude.
-
-
Weights
Operating Weight
110225 lb
-
-
Shipping Weight
84373 lb
-
-
Note (1)
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
-
-
Note (2)
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
-
-
Undercarriage
Shoe Type
Extreme Service
-
-
Width - Shoe
24 in
-
-
Shoes/Side
43
-
-
Grouser Height
3.3 in
-
-
Pitch
9.4 in
-
-
Ground Clearance
18.1 in
-
-
Track Gauge
88.6 in
-
-
Length - Track on Ground
136.6 in
-
-
Ground Contact Area
45.6 ft²
-
-
Track Rollers/Side
8
-
-
Number of Carrier Rollers
1 per side (optional)
-
-
Standards
ROPS
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
-
-
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
-
-
Sound
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
-
-
Sound (1)
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
-
-
Sound (2)
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
-
-
Steering and Brakes
Steering Type
Differential
-
-
Brake Type
Spring Applied Wet Disc
-
-
Brake Diameter
15.5 in
-
-
Brake Count
8
-
-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model
Cat® C18
-
-
Bore
5.7 in³
-
-
Stroke
7.2 in³
-
-
Displacement
1106 in³
-
-
Engine Power - Gross SAE J1995
477 HP
-
-
Engine Power - ISO 14396
468 HP
-
-
Engine Power - Net SAE J1349/ISO 9249
440 HP
-
-
Emissions
U.S. EPA Tier 4 / EU Stage V
-
-
Note (1)
All Engine ratings apply at 1,750 rpm.
-
-
Note (2)
No derating required up to 2499 m (8,200 ft).
-
-
FLUID CAPACITIES
Fuel Tank (Splash Fill)
254 gal (US)
-
-
DEF Tank (Tier 4 only)
9.5 gal (US)
-
-
Fuel Tank (Fast Fill)
248 gal (US)
-
-
Cooling System
21 gal (US)
-
-
Engine Crankcase*
10 gal (US)
-
-
Powertrain
40 gal (US)
-
-
Final Drives (each)
4 gal (US)
-
-
Roller Frames (each)
12 gal (US)
-
-
Pivot Shaft Oil
8 gal (US)
-
-
Hydraulic System Tank
24 gal (US)
-
-
Note
*With oil filters.
-
-
Note 2
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
-
-
Note 3
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
-
-
Note 4
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
-
-
Hydraulic Controls
Pump Type
Piston-type geared to flywheel
-
-
Pump Output - Steering
96 gal/min
-
-
Fan Pump
21 gal/min
-
-
Tilt Cylinder Flow - Rod End Flow
53 gal/min
-
-
Tilt Cylinder Flow - Head End Flow
53 gal/min
-
-
Lift Cylinder Relief Valve Setting
3800 lbf/in
-
-
Tilt Cylinder Relief Valve Setting
2799 psi
-
-
Ripper - Lift - Relief Valve Setting
3800 psi
-
-
Ripper - Pitch - Relief Valve Setting
3800 psi
-
-
Steering System - Pressure
5874 psi
-
-
Tank Capacity
24 gal/min
-
-
Note (1)
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
-
-
Note (2)
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
-
-
Note (3)
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Transmission
1.0 Forward
2.2 mile/h
-
-
2.0 Forward
3.9 mile/h
-
-
3.0 Forward
6.8 mile/h
-
-
1.0 Reverse
2.7 mile/h
-
-
2.0 Reverse
4.8 mile/h
-
-
3.0 Reverse
8.4 mile/h
-
-
Type
Planetary powershift
-
-
Transmission Type
-
Cat planetary power shift
-
Forward - 1
-
4.2 mile/h
-
Forward - 2
-
7.2 mile/h
-
Forward - 3
-
12.6 mile/h
-
Forward - 4
-
22 mile/h
-
Reverse - 1
-
4.2 mile/h
-
Reverse - 2
-
7.6 mile/h
-
Reverse - 3
-
13.3 mile/h
-
Direct Drive - Forward 1
-
Lock-up disabled
-
Direct Drive - Forward 2
-
7.7 mile/h
-
Direct Drive - Forward 3
-
13.7 mile/h
-
Direct Drive - Forward 4
-
23.9 mile/h
-
Direct Drive - Reverse 1
-
4.5 mile/h
-
Direct Drive - Reverse 2
-
8.1 mile/h
-
Direct Drive - Reverse 3
-
14.3 mile/h
-
Blade - Semi-Universal
Blade Capacity (SAE J1265)
17.8 yd³
-
-
Blade Width (over end bits)
171.3 in
-
-
Blade Height
76.1 in
-
-
Maximum Digging Depth
23.9 in
-
-
Ground Clearance at Full Lift
56 in
-
-
Maximum Tilt
37 in
-
-
Blade Weight
10587 lb
-
-
Total Operating Weight* (with blade and single-shank ripper)
110205 lb
-
-
Note
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Blade - Universal
Blade Capacity (SAE J1265)
21.7 yd³
-
-
Blade Width (over end bits)
184.3 in
-
-
Blade Height
76.1 in
-
-
Maximum Digging Depth
23.9 in
-
-
Ground Clearance at Full Lift
56 in
-
-
Maximum Tilt
39.9 in
-
-
Blade Weight
12016 lb
-
-
Total Operating Weight* (with blade and single-shank ripper)
111362 lb
-
-
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Ripper - Single Shank
Maximum penetration force * (shank vertical)
35520 lbf
-
-
Maximum penetration depth (standard tip)
48.5 in
-
-
Pryout Force
74637 lbf
-
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
34.7 in
-
-
Number of Pockets
1
-
-
Weight
10701 lb
-
-
Total Operating Weight* (with SU Blade and noted ripper)
110205 lb
-
-
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type.
-
-
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)
38667 lbf
-
-
Maximum penetration depth (standard tip)
68 in
-
-
Pryout Force
74412 lbf
-
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
32.2 in
-
-
Number of Pockets
1
-
-
Weight
10981 lb
-
-
Total Operating Weight* (with SU Blade and noted ripper)
110485 lb
-
-
Note
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical
34621 lbf
-
-
Maximum Penetration - Standard Tip
31.4 in
-
-
Pry-Out Force - Multi-Shank Ripper with One Tooth
81156 lbf
-
-
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
34.6 in
-
-
Number of Pockets
3
-
-
Weight
12136 lb
-
-
Total Operating Weight* - With SU-Blade and Ripper
111739 lb
-
-
Note
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
-
-
Dimensions (Approximate)
Ground Clearance*
18.1 in
-
-
Track Gauge
88.6 in
-
-
Width - Without Trunnions - Standard Shoe
113 in
-
-
Width - Over Trunnions
130.3 in
-
-
Height - FOPS Cab*
150.4 in
-
-
Height - Top of Stack*
152.6 in
-
-
Height - ROPS/Canopy*
157.5 in
-
-
Drawbar Height (Center of Clevis)*
30 in
-
-
Length - Track on Ground
136.6 in
-
-
Overall Length - Basic Tractor
193.3 in
-
-
Length - Basic Tractor - With Drawbar
206.4 in
-
-
Length - Basic Tractor - With Winch
218.3 in
-
-
Length - With SU-Blade**
259.9 in
-
-
Length - With U-Blade
274.3 in
-
-
Length - With Single-Shank Ripper
257 in
-
-
Length - With Multi-Shank Ripper
257.4 in
-
-
Overall Length - SU-Blade/SS Ripper
323.6 in
-
-
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
-
-
Winches
Winch Model
PA 140VS
-
-
Weight*
3950 lb
-
-
Oil Capacity
4 gal (US)
-
-
Drum Width
12.6 in
-
-
Wire Cable Diameter - Recommended
1.13 in
-
-
Wire Cable Diameter - Optional
1.25 ft
-
-
Maximum Drum Capacity - Recommended Cable Length
257 in
-
-
Maximum Drum Capacity - Optional Cable Length
204 ft
-
-
Wire Cable Ferrule Size - Outside Diameter
2.4 in
-
-
Wire Cable Ferrule Size - Length
2.8 in
-
-
Note
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
