CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D9 Dozer
    View Product
    814 Wheel Dozer
    View Product Remove
    834 Wheel Dozer
    View Product Remove

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model Cat® C18 - -
    Engine Power - Net SAE J1349/ISO 9249 452 HP - -
    Bore 5.7 in³ - -
    Stroke 7.2 in - -
    Displacement 1106 in³ - -
    Engine Power - Gross SAE J1995 487 HP - -
    Engine Power - ISO 14396 479 HP - -
    Emissions U.S. EPA Tier 2 or Tier 3 equivalent - -
    Note (1) All engine ratings apply at 1,750 rpm. - -
    Note (2) No derating required up to 4267 m (14,000 ft) altitude. - -

    Weights
    Operating Weight 110225 lb - -
    Shipping Weight 84373 lb - -
    Note (1) D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. - -
    Note (2) D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. - -

    Undercarriage
    Shoe Type Extreme Service - -
    Width - Shoe 24 in - -
    Shoes/Side 43 - -
    Grouser Height 3.3 in - -
    Pitch 9.4 in - -
    Ground Clearance 18.1 in - -
    Track Gauge 88.6 in - -
    Length - Track on Ground 136.6 in - -
    Ground Contact Area 45.6 ft² - -
    Track Rollers/Side 8 - -
    Number of Carrier Rollers 1 per side (optional) - -

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. - -
    FOPS Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. - -
    Sound The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling - -
    Sound (1) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c - -
    Sound (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. - -

    Steering and Brakes
    Steering Type Differential - -
    Brake Type Spring Applied Wet Disc - -
    Brake Diameter 15.5 in - -
    Brake Count 8 - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C18 - -
    Bore 5.7 in³ - -
    Stroke 7.2 in³ - -
    Displacement 1106 in³ - -
    Engine Power - Gross SAE J1995 477 HP - -
    Engine Power - ISO 14396 468 HP - -
    Engine Power - Net SAE J1349/ISO 9249 440 HP - -
    Emissions U.S. EPA Tier 4 / EU Stage V - -
    Note (1) All Engine ratings apply at 1,750 rpm. - -
    Note (2) No derating required up to 2499 m (8,200 ft). - -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) 254 gal (US) - -
    DEF Tank (Tier 4 only) 9.5 gal (US) - -
    Fuel Tank (Fast Fill) 248 gal (US) - -
    Cooling System 21 gal (US) - -
    Engine Crankcase* 10 gal (US) - -
    Powertrain 40 gal (US) - -
    Final Drives (each) 4 gal (US) - -
    Roller Frames (each) 12 gal (US) - -
    Pivot Shaft Oil 8 gal (US) - -
    Hydraulic System Tank 24 gal (US) - -
    Note *With oil filters. - -
    Note 2 Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - -
    Note 3 All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - -
    Note 4 Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - -

    Hydraulic Controls
    Pump Type Piston-type geared to flywheel - -
    Pump Output - Steering 96 gal/min - -
    Fan Pump 21 gal/min - -
    Tilt Cylinder Flow - Rod End Flow 53 gal/min - -
    Tilt Cylinder Flow - Head End Flow 53 gal/min - -
    Lift Cylinder Relief Valve Setting 3800 lbf/in - -
    Tilt Cylinder Relief Valve Setting 2799 psi - -
    Ripper - Lift - Relief Valve Setting 3800 psi - -
    Ripper - Pitch - Relief Valve Setting 3800 psi - -
    Steering System - Pressure 5874 psi - -
    Tank Capacity 24 gal/min - -
    Note (1) Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). - -
    Note (2) Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). - -
    Note (3) Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Transmission
    1.0 Forward 2.2 mile/h - -
    2.0 Forward 3.9 mile/h - -
    3.0 Forward 6.8 mile/h - -
    1.0 Reverse 2.7 mile/h - -
    2.0 Reverse 4.8 mile/h - -
    3.0 Reverse 8.4 mile/h - -
    Type Planetary powershift - -
    Transmission Type - Cat Planetary Power Shift Cat planetary power shift
    Forward - 1 - 3.7 mile/h 4.2 mile/h
    Forward - 2 - 6.5 mile/h 7.2 mile/h
    Forward - 3 - 11.2 mile/h 12.6 mile/h
    Forward - 4 - 19.4 mile/h 22 mile/h
    Reverse - 1 - 4.2 mile/h 4.2 mile/h
    Reverse - 2 - 7.3 mile/h 7.6 mile/h
    Reverse - 3 - 12.8 mile/h 13.3 mile/h
    Reverse - 4 - 22.1 mile/h -
    Direct Drive - Forward 1 - - Lock-up disabled
    Direct Drive - Forward 2 - - 7.7 mile/h
    Direct Drive - Forward 3 - - 13.7 mile/h
    Direct Drive - Forward 4 - - 23.9 mile/h
    Direct Drive - Reverse 1 - - 4.5 mile/h
    Direct Drive - Reverse 2 - - 8.1 mile/h
    Direct Drive - Reverse 3 - - 14.3 mile/h

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) 17.8 yd³ - -
    Blade Width (over end bits) 171.3 in - -
    Blade Height 76.1 in - -
    Maximum Digging Depth 23.9 in - -
    Ground Clearance at Full Lift 56 in - -
    Maximum Tilt 37 in - -
    Blade Weight 10587 lb - -
    Total Operating Weight* (with blade and single-shank ripper) 110205 lb - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Blade - Universal
    Blade Capacity (SAE J1265) 21.7 yd³ - -
    Blade Width (over end bits) 184.3 in - -
    Blade Height 76.1 in - -
    Maximum Digging Depth 23.9 in - -
    Ground Clearance at Full Lift 56 in - -
    Maximum Tilt 39.9 in - -
    Blade Weight 12016 lb - -
    Total Operating Weight* (with blade and single-shank ripper) 111362 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 35520 lbf - -
    Maximum penetration depth (standard tip) 48.5 in - -
    Pryout Force 74637 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.7 in - -
    Number of Pockets 1 - -
    Weight 10701 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) 110205 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 38667 lbf - -
    Maximum penetration depth (standard tip) 68 in - -
    Pryout Force 74412 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 32.2 in - -
    Number of Pockets 1 - -
    Weight 10981 lb - -
    Total Operating Weight* (with SU Blade and noted ripper) 110485 lb - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical 34621 lbf - -
    Maximum Penetration - Standard Tip 31.4 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth 81156 lbf - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.6 in - -
    Number of Pockets 3 - -
    Weight 12136 lb - -
    Total Operating Weight* - With SU-Blade and Ripper 111739 lb - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - -

    Dimensions (Approximate)
    Ground Clearance* 18.1 in - -
    Track Gauge 88.6 in - -
    Width - Without Trunnions - Standard Shoe 113 in - -
    Width - Over Trunnions 130.3 in - -
    Height - FOPS Cab* 150.4 in - -
    Height - Top of Stack* 152.6 in - -
    Height - ROPS/Canopy* 157.5 in - -
    Drawbar Height (Center of Clevis)* 30 in - -
    Length - Track on Ground 136.6 in - -
    Overall Length - Basic Tractor 193.3 in - -
    Length - Basic Tractor - With Drawbar 206.4 in - -
    Length - Basic Tractor - With Winch 218.3 in - -
    Length - With SU-Blade** 259.9 in - -
    Length - With U-Blade 274.3 in - -
    Length - With Single-Shank Ripper 257 in - -
    Length - With Multi-Shank Ripper 257.4 in - -
    Overall Length - SU-Blade/SS Ripper 323.6 in - -
    Note (1) *Includes grouser height for total dimensions on hard surfaces. - -
    Height to Top of Beacon - 13.1 ft -
    Height - Top of Cab - 12.1 ft -
    Height - Top of Exhaust Pipe - 11.3 ft -
    Height - Top of Hood - 8.7 ft -
    Height to Top of Radiator Guard - 8 ft -
    Ground Clearance to Hitch - 1.4 ft -
    Ground Clearance to Transmission Guard - 1.4 ft -
    Ground Clearance to Bottom of Bumper - 2.3 ft -
    Centerline of Rear Axle to Bumper - 6.5 ft -
    Centerline of Front Axle to Hitch - 5.5 ft -
    Wheel Base - 11 ft -
    Width over Platform - 10.3 ft -
    Overall Length to Front Tire - 21 ft -
    Overall Machine Length with Straight Blade - 23.6 ft -
    Overall Machine Length with Coal Blade - 25.5 ft -

    Winches
    Winch Model PA 140VS - -
    Weight* 3950 lb - -
    Oil Capacity 4 gal (US) - -
    Drum Width 12.6 in - -
    Wire Cable Diameter - Recommended 1.13 in - -
    Wire Cable Diameter - Optional 1.25 ft - -
    Maximum Drum Capacity - Recommended Cable Length 257 in - -
    Maximum Drum Capacity - Optional Cable Length 204 ft - -
    Wire Cable Ferrule Size - Outside Diameter 2.4 in - -
    Wire Cable Ferrule Size - Length 2.8 in - -
    Note *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - -
    Note (2) Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - Cat C7.1 -
    Net Power (SAE J1349:2011) - 249 HP -
    Net Power (ISO 9249:2007) - 249 HP -
    Emissions - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - 2200 r/min -
    Gross Power (SAE J1995:2014) - 284 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 902 lb/ft -
    Torque Rise - 52% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -
    Low Idle Speed - 800 r/min -
    Maximum Altitude without Derating - 9842.5 ft -
    Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - 48526 lb -

    Scoops
    Chip Scoop Doze Capacity - 37.9 yd³ 70 yd³
    Chip Scoop Carry Capacity - 19 yd³ 35 yd³
    Coal Scoop Carry Capacity - - 30 yd³
    Coal Scoop Doze Capacity - - 60 yd³

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - Cat C7.1 -
    Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - 2200 r/min -
    Net Power (SAE J1349:2011) - 249 HP -
    Gross Power (SAE J1995:2014) - 286 HP -
    Engine Power (ISO 14396:2002) - 275 HP -
    Peak Torque - 1,400 rpm - 749 lb/ft -
    Torque Rise - 26% -
    Bore - 4.1 in -
    Stroke - 5.3 in -
    Displacement - 427.8 in³ -
    High Idle Speed - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - 51639 lb -

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - Pilot operated LS valve with EH Pilot operated LS valve with EH
    Lift/Tilt System - Variable displacement piston Variable displacement piston
    Maximum Flow at 2,200 rpm - 23.5 gal/min -
    Relief Valve Setting - Lift/Tilt - 3190 psi 4641 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - 120 mm × 915 mm (4.7 in × 36.0 in) 139.75 mm × 1021 mm (5.5 in × 40.2 in)
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - 101.6 mm × 234 mm (4.0 in × 9.2 in) 140 mm × 230 mm (5.5 in × 9.1 in)
    Pilot System - Open center, fixed displacement gear Variable displacement piston
    Pilot Relief Valve Setting - 3046 psi 580 psi
    Maximum Flow at 1,900 rpm - - 153 gal/min
    Pilot Maximum Flow - - 13.7 gal/min

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing
    Steering System - Pump - Variable displacement piston Piston, variable displacement
    Maximum Flow at 2,200 rpm - 38.8 gal/min -
    Relief Valve Setting - Steering - 4003 psi 3495 psi
    Total Steering Angle - 72° 86 °
    Steering Cycle Times - High Idle - 3 s 3.1 s
    Steering Cycle Times - Low Idle - 8.2 s 5.7 s
    Maximum Flow - - 65.8 gal/min

    Service Refill Capacities
    Fuel Tank - 132.1 gal (US) 209.5 gal (US)
    Diesel Exhaust Fluid Tank - 4.2 gal (US) 8.7 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - 19.3 gal (US) -
    Engine Crankcase - 5.3 gal (US) -
    Transmission - 13.2 gal (US) 31.7 gal (US)
    Differential - Final Drives - Front - 17.2 gal (US) 49.1 gal (US)
    Differential - Final Drives - Rear - 17.2 gal (US) 49.1 gal (US)
    Hydraulic System - Implement/Steering - 34.1 gal (US) -
    Hydraulic Tank Only - 19.8 gal (US) -
    Cooling System - - 31.7 gal (US)
    Crankcase - - 15.9 gal (US)
    Hydraulic System Factory Fill - - 63.4 gal (US)
    Hydraulic System - Tank Only - - 37 gal (US)

    Axles
    Front - Planetary – Fixed Fixed
    Rear - Planetary – Oscillating Trunnion
    Oscillation Angle - ±10° ±13°

    Braking System
    Service Brakes - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) 72 dB(A)
    Machine Sound Level (ISO 6395) - 111 dB(A) 113 dB(A)
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) 72 dB(A)
    Machine Sound Level (ISO 6395) - 109 dB(A) 109 dB(A)
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 112 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - 70 dB(A) -
    Machine Sound Level (ISO 6395) - 110 dB(A) -
    Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Engine
    Engine Model - - Cat® C18
    Rated Speed - - 1900 r/min
    Peak Power Speed - - 1500 r/min
    Gross Power - SAE J1995 - - 562 HP
    Net Power - SAE J1349 - - 496 HP
    Bore - - 5.7 in
    Stroke - - 7.2 in
    Displacement - - 1105 in³
    Peak Torque - 1,300 rpm - - 2092 lb/ft
    Torque Rise - - 52 %
    Emissions - - U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2.

    Operating Specifications
    Operating Weight - - 105271 lb
    Blade Capacities - - 7.9 – 22.2 m3 (10.3 – 29.0 yd3)
    Coal Scoop Operating Weight - - 112428 lb
    Chip Scoop Operating Weight - - 112838 lb

    Brakes
    Brakes - - ISO 3450: 2011

    Dimensions
    Height - Top of Exhaust Stack - - 15.9 ft
    Height - Top of Air Cleaner - - 12.8 ft
    Height - Top of Hood - - 10.9 ft
    Ground Clearance - Bumper - - 3.1 ft
    Centerline of Rear Axle to Edge of Bumper - - 10.5 ft
    Wheel Base - - 14.9 ft
    Length - Front of Tire - - 28.4 ft
    Length - Straight Blade on Ground - - 32.6 ft
    Centerline of Front Axle to Hitch - - 7.5 ft
    Length - Universal Blade on Ground - - 34.4 ft
    Ground Clearance - - 1.7 ft
    Height - Top of Cab - - 13.7 ft
    Add a Similar Product: