CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D9 Dozer
    View Product
    844 Wheel Dozer
    View Product Remove
    D6 XE Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model Cat® C18 - - -
    Engine Power - Net SAE J1349/ISO 9249 452 HP - - -
    Bore 5.7 in³ - - -
    Stroke 7.2 in - - -
    Displacement 1106 in³ - - -
    Engine Power - Gross SAE J1995 487 HP - - -
    Engine Power - ISO 14396 479 HP - - -
    Emissions U.S. EPA Tier 2 or Tier 3 equivalent - - -
    Note (1) All engine ratings apply at 1,750 rpm. - - -
    Note (2) No derating required up to 4267 m (14,000 ft) altitude. - - -

    Weights
    Operating Weight 110225 lb - 51333 lb 20640 lb
    Shipping Weight 84373 lb - - -
    Note (1) D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. - - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. - - For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - - 21369 lb
    Operating Weight - LGP, 762 mm/30 in - - - 21810 lb

    Undercarriage
    Shoe Type Extreme Service - - -
    Width - Shoe 24 in - - -
    Shoes/Side 43 - - -
    Grouser Height 3.3 in - - -
    Pitch 9.4 in - - -
    Ground Clearance 18.1 in - - -
    Track Gauge 88.6 in - - 63 in
    Length - Track on Ground 136.6 in - - -
    Ground Contact Area 45.6 ft² - - -
    Track Rollers/Side 8 - - -
    Number of Carrier Rollers 1 per side (optional) - - -
    Ground Pressure - LGP - - - 4.5 psi
    Track Gauge - LGP - - - 69 in
    Length - Track on Ground - LGP - - - 91 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - 40
    Ground Pressure - LGP, 762 mm (30 in) - - - 3.9 psi
    Length - Track on Ground - LGP, 762 mm (30 in) - - - 91 in
    Shoe Width - LGP - - - 26 in
    Shoe Width - LGP, 762 mm (30 in) - - - 30 in
    Number of Rollers - Each Side - - - 7
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    Ground Pressure - - - 5.7 psi
    Length of Track on Ground - - - 91 in
    Number of Shoes - Each Side - Abrasion Undercarriage - - - 36
    Shoe Width - Standard - - - 20 in

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. - - -
    FOPS Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. - - -
    Sound The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling - - -
    Sound (1) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c - - -
    Sound (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. - - -

    Steering and Brakes
    Steering Type Differential - - -
    Brake Type Spring Applied Wet Disc - - -
    Brake Diameter 15.5 in - - -
    Brake Count 8 - - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C18 - - -
    Bore 5.7 in³ - - -
    Stroke 7.2 in³ - - -
    Displacement 1106 in³ - - -
    Engine Power - Gross SAE J1995 477 HP - - -
    Engine Power - ISO 14396 468 HP - - -
    Engine Power - Net SAE J1349/ISO 9249 440 HP - - -
    Emissions U.S. EPA Tier 4 / EU Stage V - - -
    Note (1) All Engine ratings apply at 1,750 rpm. - - -
    Note (2) No derating required up to 2499 m (8,200 ft). - - -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) 254 gal (US) - - -
    DEF Tank (Tier 4 only) 9.5 gal (US) - - -
    Fuel Tank (Fast Fill) 248 gal (US) - - -
    Cooling System 21 gal (US) - - -
    Engine Crankcase* 10 gal (US) - - -
    Powertrain 40 gal (US) - - -
    Final Drives (each) 4 gal (US) - - -
    Roller Frames (each) 12 gal (US) - - -
    Pivot Shaft Oil 8 gal (US) - - -
    Hydraulic System Tank 24 gal (US) - - -
    Note *With oil filters. - - -
    Note 2 Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - - -
    Note 3 All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - - -
    Note 4 Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - - -

    Hydraulic Controls
    Pump Type Piston-type geared to flywheel - - -
    Pump Output - Steering 96 gal/min - - -
    Fan Pump 21 gal/min - - -
    Tilt Cylinder Flow - Rod End Flow 53 gal/min - - -
    Tilt Cylinder Flow - Head End Flow 53 gal/min - - -
    Lift Cylinder Relief Valve Setting 3800 lbf/in - - -
    Tilt Cylinder Relief Valve Setting 2799 psi - - -
    Ripper - Lift - Relief Valve Setting 3800 psi - - -
    Ripper - Pitch - Relief Valve Setting 3800 psi - - -
    Steering System - Pressure 5874 psi - - -
    Tank Capacity 24 gal/min - - -
    Note (1) Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). - - -
    Note (2) Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). - - -
    Note (3) Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) - - -
    Pump Output - - - 17.2 gal/min
    Relief Valve Settings - - - 2988 psi

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Transmission
    1.0 Forward 2.2 mile/h - - -
    2.0 Forward 3.9 mile/h - - -
    3.0 Forward 6.8 mile/h - - -
    1.0 Reverse 2.7 mile/h - - -
    2.0 Reverse 4.8 mile/h - - -
    3.0 Reverse 8.4 mile/h - - -
    Type Planetary powershift - - -
    Transmission Type - Cat Planetary Power Shift - -
    Converter Drive - Forward 1 - 4.5 mile/h - -
    Converter Drive - Forward 2 - 8.3 mile/h - -
    Converter Drive - Forward 3 - 14.2 mile/h - -
    Converter Drive - Reverse 1 - 4.9 mile/h - -
    Converter Drive - Reverse 2 - 9.1 mile/h - -
    Converter Drive - Reverse 3 - 15.5 mile/h - -
    Direct Drive - Forward 1 - Lock-up disabled - -
    Direct Drive - Forward 2 - 8.5 mile/h - -
    Direct Drive - Forward 3 - 15.2 mile/h - -
    Direct Drive - Reverse 1 - 5.4 mile/h - -
    Direct Drive - Reverse 2 - 9.6 mile/h - -
    Direct Drive - Reverse 3 - 16.4 mile/h - -
    Power Train - - Electric Drive -
    Drive Pumps - - - 1
    Maximum Travel Speed - Forward - - - 5.6 mile/h
    Maximum Travel Speed - Reverse - - - 6.2 mile/h
    Track Motors - - - 2
    Relief Valve Settings - - - 7033 psi

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) 17.8 yd³ - - -
    Blade Width (over end bits) 171.3 in - - -
    Blade Height 76.1 in - - -
    Maximum Digging Depth 23.9 in - - -
    Ground Clearance at Full Lift 56 in - - -
    Maximum Tilt 37 in - - -
    Blade Weight 10587 lb - - -
    Total Operating Weight* (with blade and single-shank ripper) 110205 lb - - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Blade - Universal
    Blade Capacity (SAE J1265) 21.7 yd³ - - -
    Blade Width (over end bits) 184.3 in - - -
    Blade Height 76.1 in - - -
    Maximum Digging Depth 23.9 in - - -
    Ground Clearance at Full Lift 56 in - - -
    Maximum Tilt 39.9 in - - -
    Blade Weight 12016 lb - - -
    Total Operating Weight* (with blade and single-shank ripper) 111362 lb - - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 35520 lbf - - -
    Maximum penetration depth (standard tip) 48.5 in - - -
    Pryout Force 74637 lbf - - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.7 in - - -
    Number of Pockets 1 - - -
    Weight 10701 lb - - -
    Total Operating Weight* (with SU Blade and noted ripper) 110205 lb - - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 38667 lbf - - -
    Maximum penetration depth (standard tip) 68 in - - -
    Pryout Force 74412 lbf - - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 32.2 in - - -
    Number of Pockets 1 - - -
    Weight 10981 lb - - -
    Total Operating Weight* (with SU Blade and noted ripper) 110485 lb - - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical 34621 lbf - - -
    Maximum Penetration - Standard Tip 31.4 in - - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth 81156 lbf - - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.6 in - - -
    Number of Pockets 3 - - -
    Weight 12136 lb - - -
    Total Operating Weight* - With SU-Blade and Ripper 111739 lb - - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Dimensions (Approximate)
    Ground Clearance* 18.1 in - - -
    Track Gauge 88.6 in - - -
    Width - Without Trunnions - Standard Shoe 113 in - - -
    Width - Over Trunnions 130.3 in - - -
    Height - FOPS Cab* 150.4 in - - -
    Height - Top of Stack* 152.6 in - - -
    Height - ROPS/Canopy* 157.5 in - - -
    Drawbar Height (Center of Clevis)* 30 in - - -
    Length - Track on Ground 136.6 in - - -
    Overall Length - Basic Tractor 193.3 in - - -
    Length - Basic Tractor - With Drawbar 206.4 in - - -
    Length - Basic Tractor - With Winch 218.3 in - - -
    Length - With SU-Blade** 259.9 in - - -
    Length - With U-Blade 274.3 in - - -
    Length - With Single-Shank Ripper 257 in - - -
    Length - With Multi-Shank Ripper 257.4 in - - -
    Overall Length - SU-Blade/SS Ripper 323.6 in - - -
    Note (1) *Includes grouser height for total dimensions on hard surfaces. - - -
    Height - Top of ROPS - 17.2 ft - -
    Height - Top of Exhaust Pipe - 16.6 ft - -
    Height - Top of Hood - 12.7 ft - -
    Ground Clearance - 2 ft - -
    Centerline of Front Axle to Hitch - 7.5 ft - -
    Centerline of Rear Axle to Edge of Bumper - 12.5 ft - -
    Wheel Base - 15.1 ft - -
    Length - With Blade on Ground - 36.5 ft - -

    Winches
    Winch Model PA 140VS - - -
    Weight* 3950 lb - - -
    Oil Capacity 4 gal (US) - - -
    Drum Width 12.6 in - - -
    Wire Cable Diameter - Recommended 1.13 in - - -
    Wire Cable Diameter - Optional 1.25 ft - - -
    Maximum Drum Capacity - Recommended Cable Length 257 in - - -
    Maximum Drum Capacity - Optional Cable Length 204 ft - - -
    Wire Cable Ferrule Size - Outside Diameter 2.4 in - - -
    Wire Cable Ferrule Size - Length 2.8 in - - -
    Note *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - - -
    Note (2) Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - - -

    Engine
    Engine Model - C27 Cat® Cat C9.3B Cat® C3.6
    Rated Speed - 1800 r/min - -
    Gross Power - ISO 14396 - 752 HP - -
    Gross Power - SAE J1995 - 766 HP - -
    Net Power - SAE J1349 - Standard Ambient - 699 HP - -
    Net Power - SAE J1349 - High Ambient - 648 HP - -
    Bore - 5.4 in - -
    Stroke - 6 in - -
    Displacement - 1649.5 in³ - 220 in³
    Peak Torque - Speed - 2624 lb/ft - -
    Torque Rise - 18 % - -
    Emissions - U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2 U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V -
    Power - Net - - 215 HP 104 HP
    Net Power - Rated - ISO 9249/SAE J1349 - - 215 HP -
    Net Power (Rated) - ISO 9249 (DIN) - - 219 mhp -
    Note (1) - - Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) - - Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) - - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. -
    Note (4) - - Machine Build Number 20B -
    Net Power - 2,200 rpm - SAE J1349 - - - 104 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - 104 HP
    Power Train - - - Hydrostatic

    Operating Specifications
    Operating Weight - 165089 lb - -
    Blade Capacities - 15.9 - 30.7 m3 (20.7 - 40.2 yd3) - -

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - 82 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 133 mm × 1535 mm (5.25 in × 60.4 in) - -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 210 mm × 188 mm (8.25 in × 7.4 in) - -
    Relief Valve Setting - Bulldozer (Large Pump) - 2700 psi - -
    Relief Valve Setting - Tilt Cylinders (Small Pump) - 2920 psi - -

    Hydraulic System - Steering
    Steering System - Circuit - Pilot, load sensing - -
    Steering System - Pump - Piston, variable displacement - -
    Minimum Turning Radius - Over Blade - 34 ft - -
    Total Steering Angle - 35 ° - -
    Maximum Flow - 94.3 gal/min - -
    Relief Valve Setting - 4500 psi - -

    Service Refill Capacities
    Fuel Tank - Standard - 286.6 gal (US) - -
    Cooling System - 54.9 gal (US) - 5 gal (US)
    Crankcase - 20 gal (US) - -
    Transmission - 29.1 gal (US) - -
    Differential - Final Drives - Front - 71.6 gal (US) - -
    Differential - Final Drives - Rear - 68.9 gal (US) - -
    Hydraulic System - Implement and Hydraulic Fan - 68.9 gal (US) - -
    Hydraulic System - Steering and Braking - 34.9 gal (US) - -
    Fuel Tank - - 90 gal (US) 51.5 gal (US)
    DEF Tank - - 7.4 gal (US) -
    Final Drive - Each - LGP - - - 2.6 gal (US)
    Crankcase - With Filter - - - 2.8 gal (US)
    Transmission - Hydraulic Tank - - - 23.8 gal (US)
    Final Drives - Each Side - - - 2.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.9 gal (US)

    Axles
    Front - Fixed - -
    Rear - Trunnion - -
    Oscillation Angle - 8.5 ° - -

    Brakes
    Brakes - Meets ISO 3540:2011 - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 115 dB(A) - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - 69 dB(A) - -
    Machine Sound Level (ISO 6395:2008) - 113 dB(A) - -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards - -
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2005 Level II

    D6 XE Push Arm
    Operating Weight - - 49388 lb -
    Ground Pressure - - 8 psi -
    Width of Standard Shoe - - 24 in -
    Blade - - Semi-Universal (SU) -
    Blade Capacity - - 7.5 yd³ -

    D6 XE LGP (30-in) Push Arm
    Operating Weight - - 51020 lb -
    Ground Pressure - - 6.6 psi -
    Width of Standard Shoe - - 30 in -
    Blade - - Semi-Universal (SU) -
    Blade Capacity - - 7.6 yd³ -

    D6 XE LGP (36-in) Push Arm
    Operating Weight - - 53315 lb -
    Ground Pressure - - 5.3 psi -
    Width of Standard Shoe - - 36 in -
    Blade - - Straight -
    Blade Capacity - - 5 yd³ -

    D6 XE VPAT
    Operating Weight - - 49708 lb -
    Ground Pressure - - 7.2 psi -
    Width of Standard Shoe - - 24 in -
    Blade - - VPAT -
    Blade Capacity - - 5.4 yd³ -

    D6 XE LGP (30-in) VPAT
    Operating Weight - - 51333 lb -
    Ground Pressure - - 5.9 psi -
    Width of Standard Shoe - - 30 in -
    Blade - - VPAT -
    Blade Capacity - - 5.9 yd³ -

    D6 XE LGP (36-in) VPAT
    Operating Weight - - 52512 lb -
    Ground Pressure - - 5.1 psi -
    Width of Standard Shoe - - 36 in -
    Blade - - VPAT -
    Blade Capacity - - 6.5 yd³ -

    Sustainability
    Recyclability - - 98% -

    Ripper
    Type - - - Parallelogram
    Number of Shanks - - - 3
    Height - - - 6.5 in
    Weight - - - 1222 lb
    Maximum Digging Depth - - - 13.3 in
    Maximum Reach - Ground Line - - - 30.2 in
    Overall Width - - - 67.3 in
    Maximum Ground Clearance Under Tip - - - 17.6 in

    Dimensions
    BLADE: Blade Width - LGP - - - 126.7 in
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    BLADE: Digging Depth - LGP - - - 23.2 in
    Track Gauge - LGP - - - 67.9 in
    BLADE: Blade Capacity (SAE) - LGP - - - 3.06 yd³
    BLADE: Blade Width at Maximum Angle - LGP - - - 115.8 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - 52° to 58°
    Ground Clearance - LGP, 762 mm (30 in) - - - 13 in
    BLADE: Blade Height - LGP - - - 39.8 in
    BLADE: Blade Lift Height - LGP - - - 30.2 in
    Ground Clearance - LGP - - - 13 in
    Overall Length - With Blade - LGP, 762 mm (30 in) - - - 169.6 in
    Overall Length - With Blade - LGP - - - 169.6 in
    Note - - - Abrasion Undercarriage
    BLADE: Maximum Tilt - LGP - - - 17.7 in
    BLADE: Maximum Angle (either side) - LGP - - - 25°
    BLADE: Blade Capacity (SAE) - Standard - - - 2.86 yd³
    Track Gauge - Standard - - - 63 in
    BLADE: Digging Depth - Standard - - - 23.8 in
    BLADE: Blade Lift Height - Standard - - - 30.2 in
    Ground Clearance - Standard - - - 13 in
    Overall Length - With Blade - Standard - - - 170.7 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - 52° to 58°
    BLADE: Blade Height - Standard - - - 42.2 in
    BLADE: Maximum Tilt - Standard - - - 15.8 in
    BLADE: Blade Width - Standard - - - 109.5 in
    BLADE: Blade Width at Maximum Angle - Standard - - - 103.8 in
    BLADE: Maximum Angle (either side) - Standard - - - 25°
    Length of Basic Dozer (without blade) - Standard - - - 128.7 in
    Dozer Height - Standard - - - 109 in
    Width of Dozer (standard shoes, no blade) - LGP - - - 92.9 in
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - - 103.5 in
    Length of Basic Dozer (without blade) - LGP - - - 128.7 in
    Dozer Height - LGP, 762 mm (30 in) - - - 109 in
    Width of Dozer (standard shoes, no blade) - Standard - - - 83 in
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - - 128.7 in
    Dozer Height - LGP - - - 109 in

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - - 32150 lb
    Control - - - Hydraulic
    Rope Diameter - Optional - - - 0.75 in
    Drum Capacity - Optional Cable - - - 195 ft
    Maximum Line Speed - Full Drum - - - 79 ft/min
    Drum Capacity - Recommended Cable - - - 277 ft
    Winch Drive - - - Hydraulic
    Weight - - - 1747 lb
    Maximum Line Pull - Full Drum - - - 20350 lb
    Rope Diameter - Recommended - - - 0.63 in
    Maximum Line Speed - Bare Drum - - - 50 ft/min
    Speed - - - Variable
    Winch Length - - - 35.63 in
    Drum Diameter - - - 8 in
    Overall width - - - 27.91 in
    Drum Width - - - 9.65 in
    Throat Clearance - - - 5.6 in

    High Performance Winch
    Winch length - - - 27.76 in
    Rope diameter – optional - - - 0.75 in
    Maximum line speed – bare drum - - - 131 ft/min
    Maximum line pull – bare drum - - - 40000 lb
    Weight - - - 1345 lb
    Drum capacity – optional - - - 256 ft
    Maximum line speed – full drum - - - 207 ft/min
    Rope diameter – recommended - - - 0.63 in
    Winch drive - - - Hydrostatic
    Throat clearance - - - 6.75 in
    Drum diameter - - - 10 in
    Overall width - - - 29.2 in
    Drum width - - - 10.8 in
    Maximum line pull – full drum - - - 25000 lb
    Speed - - - Variable
    Drum capacity – recommended cable - - - 371 ft
    Control - - - Hydraulic
    Add a Similar Product: