CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D9 Dozer
    View Product
    854 Wheel Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model Cat® C18 - - -
    Engine Power - Net SAE J1349/ISO 9249 452 HP - - -
    Bore 5.7 in³ - - -
    Stroke 7.2 in - - -
    Displacement 1106 in³ - - -
    Engine Power - Gross SAE J1995 487 HP - - -
    Engine Power - ISO 14396 479 HP - - -
    Emissions U.S. EPA Tier 2 or Tier 3 equivalent - - -
    Note (1) All engine ratings apply at 1,750 rpm. - - -
    Note (2) No derating required up to 4267 m (14,000 ft) altitude. - - -

    Weights
    Operating Weight 110225 lb 224647 lb - 20640 lb
    Shipping Weight 84373 lb - - -
    Note (1) D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. - - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
    Note (2) D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. - - For machine with ripper, add 554 kg (1,222 lb).
    Operating Weight - LGP - - - 21369 lb
    Operating Weight - LGP, 762 mm/30 in - - - 21810 lb

    Undercarriage
    Shoe Type Extreme Service - - -
    Width - Shoe 24 in - - -
    Shoes/Side 43 - - -
    Grouser Height 3.3 in - - -
    Pitch 9.4 in - - -
    Ground Clearance 18.1 in - - -
    Track Gauge 88.6 in - - 63 in
    Length - Track on Ground 136.6 in - - -
    Ground Contact Area 45.6 ft² - - -
    Track Rollers/Side 8 - - -
    Number of Carrier Rollers 1 per side (optional) - - -
    Ground Pressure - LGP - - - 4.5 psi
    Track Gauge - LGP - - - 69 in
    Length - Track on Ground - LGP - - - 91 in
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - - 40
    Ground Pressure - LGP, 762 mm (30 in) - - - 3.9 psi
    Length - Track on Ground - LGP, 762 mm (30 in) - - - 91 in
    Shoe Width - LGP - - - 26 in
    Shoe Width - LGP, 762 mm (30 in) - - - 30 in
    Number of Rollers - Each Side - - - 7
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    Ground Pressure - - - 5.7 psi
    Length of Track on Ground - - - 91 in
    Number of Shoes - Each Side - Abrasion Undercarriage - - - 36
    Shoe Width - Standard - - - 20 in

    Standards
    ROPS Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. - - -
    FOPS Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. - - -
    Sound The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling - - -
    Sound (1) The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c - - -
    Sound (2) Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. - - -

    Steering and Brakes
    Steering Type Differential - - -
    Brake Type Spring Applied Wet Disc - - -
    Brake Diameter 15.5 in - - -
    Brake Count 8 - - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model Cat® C18 - - -
    Bore 5.7 in³ - - -
    Stroke 7.2 in³ - - -
    Displacement 1106 in³ - - -
    Engine Power - Gross SAE J1995 477 HP - - -
    Engine Power - ISO 14396 468 HP - - -
    Engine Power - Net SAE J1349/ISO 9249 440 HP - - -
    Emissions U.S. EPA Tier 4 / EU Stage V - - -
    Note (1) All Engine ratings apply at 1,750 rpm. - - -
    Note (2) No derating required up to 2499 m (8,200 ft). - - -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) 254 gal (US) - - -
    DEF Tank (Tier 4 only) 9.5 gal (US) - - -
    Fuel Tank (Fast Fill) 248 gal (US) - - -
    Cooling System 21 gal (US) - - -
    Engine Crankcase* 10 gal (US) - - -
    Powertrain 40 gal (US) - - -
    Final Drives (each) 4 gal (US) - - -
    Roller Frames (each) 12 gal (US) - - -
    Pivot Shaft Oil 8 gal (US) - - -
    Hydraulic System Tank 24 gal (US) - - -
    Note *With oil filters. - - -
    Note 2 Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or - - -
    Note 3 All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. - - -
    Note 4 Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. - - -

    Hydraulic Controls
    Pump Type Piston-type geared to flywheel - - -
    Pump Output - Steering 96 gal/min - - -
    Fan Pump 21 gal/min - - -
    Tilt Cylinder Flow - Rod End Flow 53 gal/min - - -
    Tilt Cylinder Flow - Head End Flow 53 gal/min - - -
    Lift Cylinder Relief Valve Setting 3800 lbf/in - - -
    Tilt Cylinder Relief Valve Setting 2799 psi - - -
    Ripper - Lift - Relief Valve Setting 3800 psi - - -
    Ripper - Pitch - Relief Valve Setting 3800 psi - - -
    Steering System - Pressure 5874 psi - - -
    Tank Capacity 24 gal/min - - -
    Note (1) Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). - - -
    Note (2) Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). - - -
    Note (3) Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) - - -
    Pump Output - - - 17.2 gal/min
    Relief Valve Settings - - - 2988 psi

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Transmission
    1.0 Forward 2.2 mile/h - - -
    2.0 Forward 3.9 mile/h - - -
    3.0 Forward 6.8 mile/h - - -
    1.0 Reverse 2.7 mile/h - - -
    2.0 Reverse 4.8 mile/h - - -
    3.0 Reverse 8.4 mile/h - - -
    Type Planetary powershift - - -
    Transmission Type - Cat Planetary Power Shift Cat Planetary Power Shift -
    Converter Drive - Forward 1 - 4.4 mile/h - -
    Converter Drive - Forward 2 - 7.7 mile/h - -
    Converter Drive - Forward 3 - 13.2 mile/h - -
    Converter Drive - Reverse 1 - 4.8 mile/h - -
    Converter Drive - Reverse 2 - 8.4 mile/h - -
    Converter Drive - Reverse 3 - 14.6 mile/h - -
    Direct Drive - Forward 1 - Lock-up disabled - -
    Direct Drive - Forward 2 - 8.1 mile/h - -
    Direct Drive - Forward 3 - 14.2 mile/h - -
    Direct Drive - Reverse 1 - 5 mile/h - -
    Direct Drive - Reverse 2 - 8.9 mile/h - -
    Direct Drive - Reverse 3 - 15.6 mile/h - -
    Note - Travel speeds based on 45/65-45 L-5 46 ply tires. - -
    Forward - 1 - - 3.7 mile/h -
    Forward - 2 - - 6.5 mile/h -
    Forward - 3 - - 11.2 mile/h -
    Forward - 4 - - 19.4 mile/h -
    Reverse - 1 - - 4.2 mile/h -
    Reverse - 2 - - 7.3 mile/h -
    Reverse - 3 - - 12.8 mile/h -
    Reverse - 4 - - 22.1 mile/h -
    Drive Pumps - - - 1
    Maximum Travel Speed - Forward - - - 5.6 mile/h
    Maximum Travel Speed - Reverse - - - 6.2 mile/h
    Track Motors - - - 2
    Relief Valve Settings - - - 7033 psi

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) 17.8 yd³ - - -
    Blade Width (over end bits) 171.3 in - - -
    Blade Height 76.1 in - - -
    Maximum Digging Depth 23.9 in - - -
    Ground Clearance at Full Lift 56 in - - -
    Maximum Tilt 37 in - - -
    Blade Weight 10587 lb - - -
    Total Operating Weight* (with blade and single-shank ripper) 110205 lb - - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Blade - Universal
    Blade Capacity (SAE J1265) 21.7 yd³ - - -
    Blade Width (over end bits) 184.3 in - - -
    Blade Height 76.1 in - - -
    Maximum Digging Depth 23.9 in - - -
    Ground Clearance at Full Lift 56 in - - -
    Maximum Tilt 39.9 in - - -
    Blade Weight 12016 lb - - -
    Total Operating Weight* (with blade and single-shank ripper) 111362 lb - - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) 35520 lbf - - -
    Maximum penetration depth (standard tip) 48.5 in - - -
    Pryout Force 74637 lbf - - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.7 in - - -
    Number of Pockets 1 - - -
    Weight 10701 lb - - -
    Total Operating Weight* (with SU Blade and noted ripper) 110205 lb - - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) 38667 lbf - - -
    Maximum penetration depth (standard tip) 68 in - - -
    Pryout Force 74412 lbf - - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 32.2 in - - -
    Number of Pockets 1 - - -
    Weight 10981 lb - - -
    Total Operating Weight* (with SU Blade and noted ripper) 110485 lb - - -
    Note *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical 34621 lbf - - -
    Maximum Penetration - Standard Tip 31.4 in - - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth 81156 lbf - - -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 34.6 in - - -
    Number of Pockets 3 - - -
    Weight 12136 lb - - -
    Total Operating Weight* - With SU-Blade and Ripper 111739 lb - - -
    Note * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. - - -

    Dimensions (Approximate)
    Ground Clearance* 18.1 in - - -
    Track Gauge 88.6 in - - -
    Width - Without Trunnions - Standard Shoe 113 in - - -
    Width - Over Trunnions 130.3 in - - -
    Height - FOPS Cab* 150.4 in - - -
    Height - Top of Stack* 152.6 in - - -
    Height - ROPS/Canopy* 157.5 in - - -
    Drawbar Height (Center of Clevis)* 30 in - - -
    Length - Track on Ground 136.6 in - - -
    Overall Length - Basic Tractor 193.3 in - - -
    Length - Basic Tractor - With Drawbar 206.4 in - - -
    Length - Basic Tractor - With Winch 218.3 in - - -
    Length - With SU-Blade** 259.9 in - - -
    Length - With U-Blade 274.3 in - - -
    Length - With Single-Shank Ripper 257 in - - -
    Length - With Multi-Shank Ripper 257.4 in - - -
    Overall Length - SU-Blade/SS Ripper 323.6 in - - -
    Note (1) *Includes grouser height for total dimensions on hard surfaces. - - -
    Height - Top of ROPS - 18.25 ft - -
    Height - Top of Exhaust Pipe - 17.17 ft 11.3 ft -
    Height - Top of Hood - 13 ft 8.7 ft -
    Ground Clearance - 27 in - -
    Centerline of Front Axle to Hitch - 9.67 ft 5.5 ft -
    Centerline of Rear Axle to Edge of Bumper - 13.75 ft - -
    Wheel Base - 19.25 ft 11 ft -
    Length - With Blade on Ground - 44 ft - -
    Height to Top of Beacon - - 13.1 ft -
    Height - Top of Cab - - 12.1 ft -
    Height to Top of Radiator Guard - - 8 ft -
    Ground Clearance to Hitch - - 1.4 ft -
    Ground Clearance to Transmission Guard - - 1.4 ft -
    Ground Clearance to Bottom of Bumper - - 2.3 ft -
    Centerline of Rear Axle to Bumper - - 6.5 ft -
    Width over Platform - - 10.3 ft -
    Overall Length to Front Tire - - 21 ft -
    Overall Machine Length with Straight Blade - - 23.6 ft -
    Overall Machine Length with Coal Blade - - 25.5 ft -

    Winches
    Winch Model PA 140VS - - -
    Weight* 3950 lb - - -
    Oil Capacity 4 gal (US) - - -
    Drum Width 12.6 in - - -
    Wire Cable Diameter - Recommended 1.13 in - - -
    Wire Cable Diameter - Optional 1.25 ft - - -
    Maximum Drum Capacity - Recommended Cable Length 257 in - - -
    Maximum Drum Capacity - Optional Cable Length 204 ft - - -
    Wire Cable Ferrule Size - Outside Diameter 2.4 in - - -
    Wire Cable Ferrule Size - Length 2.8 in - - -
    Note *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). - - -
    Note (2) Variable speed, hydraulically driven, dual braking system, three-roller fairlead. - - -

    Engine
    Engine Model - Cat C32B - Cat® C3.6
    Gross Power - 907 HP - -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - 900 HP - -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - 814 HP - -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - 907 HP - -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - 823 HP - -
    Rated Speed - 1750 r/min - -
    Bore - 5.7 in - -
    Stroke - 6.4 in - -
    Displacement - 1958 in² - 220 in³
    Peak Torque - 1,200 rpm - 3139 lb/ft - -
    Torque Rise - 30 % - -
    Note (1) - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
    Note (2) - Net torque rise meets SAE J139. - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
    Note (3) - No engine derating required up to 3050 m (10,000 ft) altitude. - -
    Power - Net - - - 104 HP
    Net Power - 2,200 rpm - SAE J1349 - - - 104 HP
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - - 104 HP
    Power Train - - - Hydrostatic

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - 161 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 177 mm × 1760 mm (0.58 ft × 5.8 ft) 120 mm × 915 mm (4.7 in × 36.0 in) -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 267 mm × 286 mm (0.88 ft × 0.94 ft) - -
    Lift/Tilt System - Circuit - - Pilot operated LS valve with EH -
    Lift/Tilt System - - Variable displacement piston -
    Maximum Flow at 2,200 rpm - - 23.5 gal/min -
    Relief Valve Setting - Lift/Tilt - - 3190 psi -
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - 101.6 mm × 234 mm (4.0 in × 9.2 in) -
    Pilot System - - Open center, fixed displacement gear -
    Pilot Relief Valve Setting - - 3046 psi -

    Service Refill Capacities
    Fuel Tank - Standard - 413 gal (US) - -
    Cooling System - 53 gal (US) - 5 gal (US)
    Crankcase - 32 gal (US) - -
    Transmission - 45 gal (US) 13.2 gal (US) -
    Differential - Final Drives - Front - 98 gal (US) 17.2 gal (US) -
    Differential - Final Drives - Rear - 90 gal (US) 17.2 gal (US) -
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - 77 gal (US) - -
    Note (1) - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo - -
    Fuel Tank - - 132.1 gal (US) 51.5 gal (US)
    Diesel Exhaust Fluid Tank - - 4.2 gal (US) -
    Cooling Systems - Tier 4 Final/EU Stage V - - 21.4 gal (US) -
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - - 19.3 gal (US) -
    Engine Crankcase - - 5.3 gal (US) -
    Hydraulic System - Implement/Steering - - 34.1 gal (US) -
    Hydraulic Tank Only - - 19.8 gal (US) -
    Final Drive - Each - LGP - - - 2.6 gal (US)
    Crankcase - With Filter - - - 2.8 gal (US)
    Transmission - Hydraulic Tank - - - 23.8 gal (US)
    Final Drives - Each Side - - - 2.6 gal (US)
    Diesel Exhaust Fluid (DEF) Tank - - - 4.9 gal (US)

    Axles
    Front - Fixed Planetary – Fixed -
    Rear - Trunnion Planetary – Oscillating -
    Oscillation Angle - - ±10° -

    Brakes
    Brakes - Meets ISO 3540:2011 - -

    Blades
    Blade Capacities - 30.5 to 44.8 m3 (40 to 58.6 yd3) - -

    Hydraulic System - Steering
    Steering System - Pump - Piston, variable displacement Variable displacement piston -
    Minimum Turning Radius - Over Blade - 31 ft - -
    Steering System - Circuit - Pilot, load sensing Pilot, load sensing -
    Total Steering Angle - 86 degrees 72° -
    Relief Valve Setting - 5004 psi - -
    Maximum Flow at 2,200 rpm - - 38.8 gal/min -
    Relief Valve Setting - Steering - - 4003 psi -
    Steering Cycle Times - High Idle - - 3 s -
    Steering Cycle Times - Low Idle - - 8.2 s -

    Operating Specifications
    Operating Weight - 224647 lb - -

    Sound Performance Levels
    Sound Performance - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was - -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards - -
    ROPS - - - ISO 3471:2008
    FOPS - - - ISO 3449:2005 Level II

    Engine - Tier 4 Final/EU Stage V
    Engine Model - - Cat C7.1 -
    Net Power (SAE J1349:2011) - - 249 HP -
    Net Power (ISO 9249:2007) - - 249 HP -
    Emissions - - U.S. EPA Tier 4 Final/EU Stage V -
    Rated Speed - - 2200 r/min -
    Gross Power (SAE J1995:2014) - - 284 HP -
    Engine Power (ISO 14396:2002) - - 275 HP -
    Peak Torque - 1,400 rpm - - 902 lb/ft -
    Torque Rise - - 52% -
    Bore - - 4.1 in -
    Stroke - - 5.3 in -
    Displacement - - 427.8 in³ -
    High Idle Speed - - 2270 r/min -
    Low Idle Speed - - 800 r/min -
    Maximum Altitude without Derating - - 9842.5 ft -
    Note - - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. -

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - - 48526 lb -

    Scoops
    Chip Scoop Doze Capacity - - 37.9 yd³ -
    Chip Scoop Carry Capacity - - 19 yd³ -

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - - Cat C7.1 -
    Emissions - - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA -
    Rated Speed - - 2200 r/min -
    Net Power (SAE J1349:2011) - - 249 HP -
    Gross Power (SAE J1995:2014) - - 286 HP -
    Engine Power (ISO 14396:2002) - - 275 HP -
    Peak Torque - 1,400 rpm - - 749 lb/ft -
    Torque Rise - - 26% -
    Bore - - 4.1 in -
    Stroke - - 5.3 in -
    Displacement - - 427.8 in³ -
    High Idle Speed - - 2270 r/min -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - - 47887 lb -

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - - 52280 lb -

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - - 51639 lb -

    Braking System
    Service Brakes - - Single Disc Wet (enclosed) 4 WHL -
    Parking Brake - - Drum and Shoe, Spring Applied, Hydraulic Released -

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A) -
    Machine Sound Level (ISO 6395) - - 111 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A) -

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A) -
    Machine Sound Level (ISO 6395) - - 109 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - - 70 dB(A) -
    Machine Sound Level (ISO 6395) - - 112 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - - 70 dB(A) -
    Machine Sound Level (ISO 6395) - - 110 dB(A) -
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed. -
    Note (4) - - The operator sound pressure level uncertainty is ± 2 dB(A). -

    Ripper
    Type - - - Parallelogram
    Number of Shanks - - - 3
    Height - - - 6.5 in
    Weight - - - 1222 lb
    Maximum Digging Depth - - - 13.3 in
    Maximum Reach - Ground Line - - - 30.2 in
    Overall Width - - - 67.3 in
    Maximum Ground Clearance Under Tip - - - 17.6 in

    Dimensions
    BLADE: Blade Width - LGP - - - 126.7 in
    Track Gauge - LGP, 762 mm (30 in) - - - 73 in
    BLADE: Digging Depth - LGP - - - 23.2 in
    Track Gauge - LGP - - - 67.9 in
    BLADE: Blade Capacity (SAE) - LGP - - - 3.06 yd³
    BLADE: Blade Width at Maximum Angle - LGP - - - 115.8 in
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - - 52° to 58°
    Ground Clearance - LGP, 762 mm (30 in) - - - 13 in
    BLADE: Blade Height - LGP - - - 39.8 in
    BLADE: Blade Lift Height - LGP - - - 30.2 in
    Ground Clearance - LGP - - - 13 in
    Overall Length - With Blade - LGP, 762 mm (30 in) - - - 169.6 in
    Overall Length - With Blade - LGP - - - 169.6 in
    Note - - - Abrasion Undercarriage
    BLADE: Maximum Tilt - LGP - - - 17.7 in
    BLADE: Maximum Angle (either side) - LGP - - - 25°
    BLADE: Blade Capacity (SAE) - Standard - - - 2.86 yd³
    Track Gauge - Standard - - - 63 in
    BLADE: Digging Depth - Standard - - - 23.8 in
    BLADE: Blade Lift Height - Standard - - - 30.2 in
    Ground Clearance - Standard - - - 13 in
    Overall Length - With Blade - Standard - - - 170.7 in
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - - 52° to 58°
    BLADE: Blade Height - Standard - - - 42.2 in
    BLADE: Maximum Tilt - Standard - - - 15.8 in
    BLADE: Blade Width - Standard - - - 109.5 in
    BLADE: Blade Width at Maximum Angle - Standard - - - 103.8 in
    BLADE: Maximum Angle (either side) - Standard - - - 25°
    Length of Basic Dozer (without blade) - Standard - - - 128.7 in
    Dozer Height - Standard - - - 109 in
    Width of Dozer (standard shoes, no blade) - LGP - - - 92.9 in
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - - 103.5 in
    Length of Basic Dozer (without blade) - LGP - - - 128.7 in
    Dozer Height - LGP, 762 mm (30 in) - - - 109 in
    Width of Dozer (standard shoes, no blade) - Standard - - - 83 in
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - - 128.7 in
    Dozer Height - LGP - - - 109 in

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - - 32150 lb
    Control - - - Hydraulic
    Rope Diameter - Optional - - - 0.75 in
    Drum Capacity - Optional Cable - - - 195 ft
    Maximum Line Speed - Full Drum - - - 79 ft/min
    Drum Capacity - Recommended Cable - - - 277 ft
    Winch Drive - - - Hydraulic
    Weight - - - 1747 lb
    Maximum Line Pull - Full Drum - - - 20350 lb
    Rope Diameter - Recommended - - - 0.63 in
    Maximum Line Speed - Bare Drum - - - 50 ft/min
    Speed - - - Variable
    Winch Length - - - 35.63 in
    Drum Diameter - - - 8 in
    Overall width - - - 27.91 in
    Drum Width - - - 9.65 in
    Throat Clearance - - - 5.6 in

    High Performance Winch
    Winch length - - - 27.76 in
    Rope diameter – optional - - - 0.75 in
    Maximum line speed – bare drum - - - 131 ft/min
    Maximum line pull – bare drum - - - 40000 lb
    Weight - - - 1345 lb
    Drum capacity – optional - - - 256 ft
    Maximum line speed – full drum - - - 207 ft/min
    Rope diameter – recommended - - - 0.63 in
    Winch drive - - - Hydrostatic
    Throat clearance - - - 6.75 in
    Drum diameter - - - 10 in
    Overall width - - - 29.2 in
    Drum width - - - 10.8 in
    Maximum line pull – full drum - - - 25000 lb
    Speed - - - Variable
    Drum capacity – recommended cable - - - 371 ft
    Control - - - Hydraulic
    Add a Similar Product: