|
|
|
|
|
Engine |
Engine Model |
Cat C9.3B |
Cat® C18 |
Cat C32B |
Cat® C3.6 |
Power - Net |
265 HP |
- |
- |
104 HP |
Net Power - Rated - ISO 9249/SAE J1349 |
265 HP |
- |
- |
- |
Net Power (Rated) - ISO 9249 (DIN) |
268 mhp |
- |
- |
- |
Emissions |
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV |
U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. |
- |
- |
Note (1) |
Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t |
- |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. |
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Note (2) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
- |
Net torque rise meets SAE J139. |
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Note (3) |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
- |
No engine derating required up to 3050 m (10,000 ft) altitude. |
- |
Note (4) |
Machine Build Number 17A |
- |
- |
- |
Rated Speed |
- |
1900 r/min |
1750 r/min |
- |
Peak Power Speed |
- |
1500 r/min |
- |
- |
Gross Power - SAE J1995 |
- |
562 HP |
- |
- |
Net Power - SAE J1349 |
- |
496 HP |
- |
- |
Bore |
- |
5.7 in |
5.7 in |
- |
Stroke |
- |
7.2 in |
6.4 in |
- |
Displacement |
- |
1105 in³ |
1958 in² |
220 in³ |
Peak Torque - 1,300 rpm |
- |
2092 lb/ft |
- |
- |
Torque Rise |
- |
52 % |
30 % |
- |
Gross Power |
- |
- |
907 HP |
- |
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 |
- |
- |
900 HP |
- |
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 |
- |
- |
814 HP |
- |
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 |
- |
- |
907 HP |
- |
Emissions (Tier 2 Equivalent): Net Power ISO - 9249 |
- |
- |
823 HP |
- |
Peak Torque - 1,200 rpm |
- |
- |
3139 lb/ft |
- |
Net Power - 2,200 rpm - SAE J1349 |
- |
- |
- |
104 HP |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
- |
- |
- |
104 HP |
Power Train |
- |
- |
- |
Hydrostatic |
Weights |
Operating Weight |
65644 lb |
- |
224647 lb |
20640 lb |
Note (1) |
Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar. |
- |
- |
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Operating Weight - LGP |
- |
- |
- |
21369 lb |
Operating Weight - LGP, 762 mm/30 in |
- |
- |
- |
21810 lb |
Note (2) |
- |
- |
- |
For machine with ripper, add 554 kg (1,222 lb). |
Transmission |
Power Train |
Fully Automatic 4-Speed |
- |
- |
- |
Transmission Type |
- |
Cat planetary power shift |
Cat Planetary Power Shift |
- |
Forward - 1 |
- |
4.2 mile/h |
- |
- |
Forward - 2 |
- |
7.2 mile/h |
- |
- |
Forward - 3 |
- |
12.6 mile/h |
- |
- |
Forward - 4 |
- |
22 mile/h |
- |
- |
Reverse - 1 |
- |
4.2 mile/h |
- |
- |
Reverse - 2 |
- |
7.6 mile/h |
- |
- |
Reverse - 3 |
- |
13.3 mile/h |
- |
- |
Direct Drive - Forward 1 |
- |
Lock-up disabled |
Lock-up disabled |
- |
Direct Drive - Forward 2 |
- |
7.7 mile/h |
8.1 mile/h |
- |
Direct Drive - Forward 3 |
- |
13.7 mile/h |
14.2 mile/h |
- |
Direct Drive - Forward 4 |
- |
23.9 mile/h |
- |
- |
Direct Drive - Reverse 1 |
- |
4.5 mile/h |
5 mile/h |
- |
Direct Drive - Reverse 2 |
- |
8.1 mile/h |
8.9 mile/h |
- |
Direct Drive - Reverse 3 |
- |
14.3 mile/h |
15.6 mile/h |
- |
Converter Drive - Forward 1 |
- |
- |
4.4 mile/h |
- |
Converter Drive - Forward 2 |
- |
- |
7.7 mile/h |
- |
Converter Drive - Forward 3 |
- |
- |
13.2 mile/h |
- |
Converter Drive - Reverse 1 |
- |
- |
4.8 mile/h |
- |
Converter Drive - Reverse 2 |
- |
- |
8.4 mile/h |
- |
Converter Drive - Reverse 3 |
- |
- |
14.6 mile/h |
- |
Note |
- |
- |
Travel speeds based on 45/65-45 L-5 46 ply tires. |
- |
Drive Pumps |
- |
- |
- |
1 |
Maximum Travel Speed - Forward |
- |
- |
- |
5.6 mile/h |
Maximum Travel Speed - Reverse |
- |
- |
- |
6.2 mile/h |
Track Motors |
- |
- |
- |
2 |
Relief Valve Settings |
- |
- |
- |
7033 psi |
Service Refill Capacities |
Fuel Tank |
123 gal (US) |
209.5 gal (US) |
- |
51.5 gal (US) |
DEF Tank |
12 gal (US) |
- |
- |
- |
Cooling System |
- |
31.7 gal (US) |
53 gal (US) |
5 gal (US) |
Crankcase |
- |
15.9 gal (US) |
32 gal (US) |
- |
Diesel Exhaust Fluid Tank |
- |
8.7 gal (US) |
- |
- |
Transmission |
- |
31.7 gal (US) |
45 gal (US) |
- |
Hydraulic System Factory Fill |
- |
63.4 gal (US) |
- |
- |
Differential - Final Drives - Front |
- |
49.1 gal (US) |
98 gal (US) |
- |
Differential - Final Drives - Rear |
- |
49.1 gal (US) |
90 gal (US) |
- |
Hydraulic System - Tank Only |
- |
37 gal (US) |
- |
- |
Fuel Tank - Standard |
- |
- |
413 gal (US) |
- |
Hydraulic System - Steering and Engine Cooling Fan - Tank Only |
- |
- |
77 gal (US) |
- |
Note (1) |
- |
- |
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo |
- |
Final Drive - Each - LGP |
- |
- |
- |
2.6 gal (US) |
Crankcase - With Filter |
- |
- |
- |
2.8 gal (US) |
Transmission - Hydraulic Tank |
- |
- |
- |
23.8 gal (US) |
Final Drives - Each Side |
- |
- |
- |
2.6 gal (US) |
Diesel Exhaust Fluid (DEF) Tank |
- |
- |
- |
4.9 gal (US) |
Standard SU |
Operating Weight |
65644 lb |
- |
- |
- |
Ground Pressure |
10 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
Semi-Universal (SU) |
- |
- |
- |
Blade Capacity |
10 yd³ |
- |
- |
- |
LGP S |
Operating Weight |
63220 lb |
- |
- |
- |
Ground Pressure |
6 psi |
- |
- |
- |
Width of Standard Shoe |
36 in |
- |
- |
- |
Blade |
Straight (S) |
- |
- |
- |
Blade Capacity |
8 yd³ |
- |
- |
- |
Waste Handler |
Operating Weight |
62035 lb |
- |
- |
- |
Ground Pressure |
10 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
Universal Landfill (U) |
- |
- |
- |
Blade Capacity |
22 yd³ |
- |
- |
- |
Sustainability |
Recyclability |
98% |
- |
- |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
|
Note (2) |
Configurations and features may vary by region. Please consult your Cat dealer for availability in your area. |
- |
- |
- |
Operating Specifications |
Operating Weight |
- |
105271 lb |
224647 lb |
- |
Blade Capacities |
- |
7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
- |
- |
Coal Scoop Operating Weight |
- |
112428 lb |
- |
- |
Chip Scoop Operating Weight |
- |
112838 lb |
- |
- |
Hydraulic System - Lift/Tilt |
Lift/Tilt System - Circuit |
- |
Pilot operated LS valve with EH |
- |
- |
Lift/Tilt System |
- |
Variable displacement piston |
- |
- |
Maximum Flow at 1,900 rpm |
- |
153 gal/min |
- |
- |
Relief Valve Setting - Lift/Tilt |
- |
4641 psi |
- |
- |
Cylinders, Double Acting - Lift, Bore and Stroke |
- |
139.75 mm × 1021 mm (5.5 in × 40.2 in) |
177 mm × 1760 mm (0.58 ft × 5.8 ft) |
- |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke |
- |
140 mm × 230 mm (5.5 in × 9.1 in) |
- |
- |
Pilot System |
- |
Variable displacement piston |
- |
- |
Pilot Maximum Flow |
- |
13.7 gal/min |
- |
- |
Pilot Relief Valve Setting |
- |
580 psi |
- |
- |
Output at 1,850 rpm and 6900 kPa (1,000 psi) |
- |
- |
161 gal/min |
- |
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke |
- |
- |
267 mm × 286 mm (0.88 ft × 0.94 ft) |
- |
Hydraulic System - Steering |
Steering System - Circuit |
- |
Pilot, load sensing |
Pilot, load sensing |
- |
Steering System - Pump |
- |
Piston, variable displacement |
Piston, variable displacement |
- |
Maximum Flow |
- |
65.8 gal/min |
- |
- |
Relief Valve Setting - Steering |
- |
3495 psi |
- |
- |
Total Steering Angle |
- |
86 ° |
86 degrees |
- |
Steering Cycle Times - High Idle |
- |
3.1 s |
- |
- |
Steering Cycle Times - Low Idle |
- |
5.7 s |
- |
- |
Minimum Turning Radius - Over Blade |
- |
- |
31 ft |
- |
Relief Valve Setting |
- |
- |
5004 psi |
- |
Axles |
Front |
- |
Fixed |
Fixed |
- |
Rear |
- |
Trunnion |
Trunnion |
- |
Oscillation Angle |
- |
±13° |
- |
- |
Brakes |
Brakes |
- |
ISO 3450: 2011 |
Meets ISO 3540:2011 |
- |
Sound Performance - Tier 4 Final/EU Stage V - Standard |
Operator Sound Level (ISO 6396) |
- |
72 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
- |
113 dB(A) |
- |
- |
Sound Performance - Tier 4 Final/EU Stage V - Suppression |
Operator Sound Level (ISO 6396) |
- |
72 dB(A) |
- |
- |
Machine Sound Level (ISO 6395) |
- |
109 dB(A) |
- |
- |
Dimensions |
Height - Top of Exhaust Stack |
- |
15.9 ft |
- |
- |
Height - Top of Air Cleaner |
- |
12.8 ft |
- |
- |
Height - Top of Hood |
- |
10.9 ft |
- |
- |
Ground Clearance - Bumper |
- |
3.1 ft |
- |
- |
Centerline of Rear Axle to Edge of Bumper |
- |
10.5 ft |
- |
- |
Wheel Base |
- |
14.9 ft |
- |
- |
Length - Front of Tire |
- |
28.4 ft |
- |
- |
Length - Straight Blade on Ground |
- |
32.6 ft |
- |
- |
Centerline of Front Axle to Hitch |
- |
7.5 ft |
- |
- |
Length - Universal Blade on Ground |
- |
34.4 ft |
- |
- |
Ground Clearance |
- |
1.7 ft |
- |
- |
Height - Top of Cab |
- |
13.7 ft |
- |
- |
BLADE: Blade Width - LGP |
- |
- |
- |
126.7 in |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
- |
73 in |
BLADE: Digging Depth - LGP |
- |
- |
- |
23.2 in |
Track Gauge - LGP |
- |
- |
- |
67.9 in |
BLADE: Blade Capacity (SAE) - LGP |
- |
- |
- |
3.06 yd³ |
BLADE: Blade Width at Maximum Angle - LGP |
- |
- |
- |
115.8 in |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
- |
- |
- |
52° to 58° |
Ground Clearance - LGP, 762 mm (30 in) |
- |
- |
- |
13 in |
BLADE: Blade Height - LGP |
- |
- |
- |
39.8 in |
BLADE: Blade Lift Height - LGP |
- |
- |
- |
30.2 in |
Ground Clearance - LGP |
- |
- |
- |
13 in |
Overall Length - With Blade - LGP, 762 mm (30 in) |
- |
- |
- |
169.6 in |
Overall Length - With Blade - LGP |
- |
- |
- |
169.6 in |
Note |
- |
- |
- |
Abrasion Undercarriage |
BLADE: Maximum Tilt - LGP |
- |
- |
- |
17.7 in |
BLADE: Maximum Angle (either side) - LGP |
- |
- |
- |
25° |
BLADE: Blade Capacity (SAE) - Standard |
- |
- |
- |
2.86 yd³ |
Track Gauge - Standard |
- |
- |
- |
63 in |
BLADE: Digging Depth - Standard |
- |
- |
- |
23.8 in |
BLADE: Blade Lift Height - Standard |
- |
- |
- |
30.2 in |
Ground Clearance - Standard |
- |
- |
- |
13 in |
Overall Length - With Blade - Standard |
- |
- |
- |
170.7 in |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard |
- |
- |
- |
52° to 58° |
BLADE: Blade Height - Standard |
- |
- |
- |
42.2 in |
BLADE: Maximum Tilt - Standard |
- |
- |
- |
15.8 in |
BLADE: Blade Width - Standard |
- |
- |
- |
109.5 in |
BLADE: Blade Width at Maximum Angle - Standard |
- |
- |
- |
103.8 in |
BLADE: Maximum Angle (either side) - Standard |
- |
- |
- |
25° |
Length of Basic Dozer (without blade) - Standard |
- |
- |
- |
128.7 in |
Dozer Height - Standard |
- |
- |
- |
109 in |
Width of Dozer (standard shoes, no blade) - LGP |
- |
- |
- |
92.9 in |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) |
- |
- |
- |
103.5 in |
Length of Basic Dozer (without blade) - LGP |
- |
- |
- |
128.7 in |
Dozer Height - LGP, 762 mm (30 in) |
- |
- |
- |
109 in |
Width of Dozer (standard shoes, no blade) - Standard |
- |
- |
- |
83 in |
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) |
- |
- |
- |
128.7 in |
Dozer Height - LGP |
- |
- |
- |
109 in |
Scoops |
Chip Scoop Carry Capacity |
- |
35 yd³ |
- |
- |
Chip Scoop Doze Capacity |
- |
70 yd³ |
- |
- |
Coal Scoop Carry Capacity |
- |
30 yd³ |
- |
- |
Coal Scoop Doze Capacity |
- |
60 yd³ |
- |
- |
Blades |
Blade Capacities |
- |
- |
30.5 to 44.8 m3 (40 to 58.6 yd3) |
- |
Dimensions (Approximate) |
Height - Top of ROPS |
- |
- |
18.25 ft |
- |
Height - Top of Exhaust Pipe |
- |
- |
17.17 ft |
- |
Height - Top of Hood |
- |
- |
13 ft |
- |
Ground Clearance |
- |
- |
27 in |
- |
Centerline of Front Axle to Hitch |
- |
- |
9.67 ft |
- |
Centerline of Rear Axle to Edge of Bumper |
- |
- |
13.75 ft |
- |
Wheel Base |
- |
- |
19.25 ft |
- |
Length - With Blade on Ground |
- |
- |
44 ft |
- |
Sound Performance Levels |
Sound Performance |
- |
- |
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was |
- |
Cab |
ROPS/FOPS |
- |
- |
ISO 3471:2008 and ISO 3449:2005 Level II Standards |
- |
ROPS |
- |
- |
- |
ISO 3471:2008 |
FOPS |
- |
- |
- |
ISO 3449:2005 Level II |
Hydraulic Controls |
Pump Output |
- |
- |
- |
17.2 gal/min |
Relief Valve Settings |
- |
- |
- |
2988 psi |
Ripper |
Type |
- |
- |
- |
Parallelogram |
Number of Shanks |
- |
- |
- |
3 |
Height |
- |
- |
- |
6.5 in |
Weight |
- |
- |
- |
1222 lb |
Maximum Digging Depth |
- |
- |
- |
13.3 in |
Maximum Reach - Ground Line |
- |
- |
- |
30.2 in |
Overall Width |
- |
- |
- |
67.3 in |
Maximum Ground Clearance Under Tip |
- |
- |
- |
17.6 in |
Undercarriage |
Ground Pressure - LGP |
- |
- |
- |
4.5 psi |
Track Gauge - LGP |
- |
- |
- |
69 in |
Length - Track on Ground - LGP |
- |
- |
- |
91 in |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
- |
- |
- |
40 |
Ground Pressure - LGP, 762 mm (30 in) |
- |
- |
- |
3.9 psi |
Length - Track on Ground - LGP, 762 mm (30 in) |
- |
- |
- |
91 in |
Shoe Width - LGP |
- |
- |
- |
26 in |
Shoe Width - LGP, 762 mm (30 in) |
- |
- |
- |
30 in |
Track Gauge |
- |
- |
- |
63 in |
Number of Rollers - Each Side |
- |
- |
- |
7 |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
- |
73 in |
Ground Pressure |
- |
- |
- |
5.7 psi |
Length of Track on Ground |
- |
- |
- |
91 in |
Number of Shoes - Each Side - Abrasion Undercarriage |
- |
- |
- |
36 |
Shoe Width - Standard |
- |
- |
- |
20 in |
Retrieval Winch |
Maximum Line Pull - Bare Drum |
- |
- |
- |
32150 lb |
Control |
- |
- |
- |
Hydraulic |
Rope Diameter - Optional |
- |
- |
- |
0.75 in |
Drum Capacity - Optional Cable |
- |
- |
- |
195 ft |
Maximum Line Speed - Full Drum |
- |
- |
- |
79 ft/min |
Drum Capacity - Recommended Cable |
- |
- |
- |
277 ft |
Winch Drive |
- |
- |
- |
Hydraulic |
Weight |
- |
- |
- |
1747 lb |
Maximum Line Pull - Full Drum |
- |
- |
- |
20350 lb |
Rope Diameter - Recommended |
- |
- |
- |
0.63 in |
Maximum Line Speed - Bare Drum |
- |
- |
- |
50 ft/min |
Speed |
- |
- |
- |
Variable |
Winch Length |
- |
- |
- |
35.63 in |
Drum Diameter |
- |
- |
- |
8 in |
Overall width |
- |
- |
- |
27.91 in |
Drum Width |
- |
- |
- |
9.65 in |
Throat Clearance |
- |
- |
- |
5.6 in |
High Performance Winch |
Winch length |
- |
- |
- |
27.76 in |
Rope diameter – optional |
- |
- |
- |
0.75 in |
Maximum line speed – bare drum |
- |
- |
- |
131 ft/min |
Maximum line pull – bare drum |
- |
- |
- |
40000 lb |
Weight |
- |
- |
- |
1345 lb |
Drum capacity – optional |
- |
- |
- |
256 ft |
Maximum line speed – full drum |
- |
- |
- |
207 ft/min |
Rope diameter – recommended |
- |
- |
- |
0.63 in |
Winch drive |
- |
- |
- |
Hydrostatic |
Throat clearance |
- |
- |
- |
6.75 in |
Drum diameter |
- |
- |
- |
10 in |
Overall width |
- |
- |
- |
29.2 in |
Drum width |
- |
- |
- |
10.8 in |
Maximum line pull – full drum |
- |
- |
- |
25000 lb |
Speed |
- |
- |
- |
Variable |
Drum capacity – recommended cable |
- |
- |
- |
371 ft |
Control |
- |
- |
- |
Hydraulic |