U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV
-
-
Note (1)
Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
-
Note (2)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
Net torque rise meets SAE J139.
-
Note (3)
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
No engine derating required up to 3050 m (10,000 ft) altitude.
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249
-
814 HP
-
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
-
907 HP
-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249
-
823 HP
-
Rated Speed
-
1750 r/min
-
Bore
-
5.7 in
-
Stroke
-
6.4 in
-
Displacement
-
1958 in²
-
Peak Torque - 1,200 rpm
-
3139 lb/ft
-
Torque Rise
-
30 %
-
Weights
Operating Weight
65644 lb
224647 lb
-
Note (1)
Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar.
-
-
Transmission
Power Train
Fully Automatic 4-Speed
-
-
Transmission Type
-
Cat Planetary Power Shift
-
Converter Drive - Forward 1
-
4.4 mile/h
-
Converter Drive - Forward 2
-
7.7 mile/h
-
Converter Drive - Forward 3
-
13.2 mile/h
-
Converter Drive - Reverse 1
-
4.8 mile/h
-
Converter Drive - Reverse 2
-
8.4 mile/h
-
Converter Drive - Reverse 3
-
14.6 mile/h
-
Direct Drive - Forward 1
-
Lock-up disabled
-
Direct Drive - Forward 2
-
8.1 mile/h
-
Direct Drive - Forward 3
-
14.2 mile/h
-
Direct Drive - Reverse 1
-
5 mile/h
-
Direct Drive - Reverse 2
-
8.9 mile/h
-
Direct Drive - Reverse 3
-
15.6 mile/h
-
Note
-
Travel speeds based on 45/65-45 L-5 46 ply tires.
-
Service Refill Capacities
Fuel Tank
123 gal (US)
-
-
DEF Tank
12 gal (US)
-
-
Fuel Tank - Standard
-
413 gal (US)
-
Cooling System
-
53 gal (US)
-
Crankcase
-
32 gal (US)
-
Transmission
-
45 gal (US)
-
Differential - Final Drives - Front
-
98 gal (US)
-
Differential - Final Drives - Rear
-
90 gal (US)
-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only
-
77 gal (US)
-
Note (1)
-
- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo
-
Standard SU
Operating Weight
65644 lb
-
-
Ground Pressure
10 psi
-
-
Width of Standard Shoe
24 in
-
-
Blade
Semi-Universal (SU)
-
-
Blade Capacity
10 yd³
-
-
LGP S
Operating Weight
63220 lb
-
-
Ground Pressure
6 psi
-
-
Width of Standard Shoe
36 in
-
-
Blade
Straight (S)
-
-
Blade Capacity
8 yd³
-
-
Waste Handler
Operating Weight
62035 lb
-
-
Ground Pressure
10 psi
-
-
Width of Standard Shoe
24 in
-
-
Blade
Universal Landfill (U)
-
-
Blade Capacity
22 yd³
-
-
Sustainability
Recyclability
98%
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
The air conditioning system on this machine contains the fluorinated
greenhouse gas refrigerant R134a (Global Warming Potential = 1430).
The system contains 1.8 kg of refrigerant which has a CO2 equivalent
of 2.574 metric tonnes.
-
Note (2)
Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.
-
-
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)
-
161 gal/min
-
Cylinders, Double Acting - Lift, Bore and Stroke
-
177 mm × 1760 mm (0.58 ft × 5.8 ft)
-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
-
267 mm × 286 mm (0.88 ft × 0.94 ft)
-
Axles
Front
-
Fixed
-
Rear
-
Trunnion
-
Brakes
Brakes
-
Meets ISO 3540:2011
-
Blades
Blade Capacities
-
30.5 to 44.8 m3 (40 to 58.6 yd3)
-
Dimensions (Approximate)
Height - Top of ROPS
-
18.25 ft
-
Height - Top of Exhaust Pipe
-
17.17 ft
-
Height - Top of Hood
-
13 ft
-
Ground Clearance
-
27 in
-
Centerline of Front Axle to Hitch
-
9.67 ft
-
Centerline of Rear Axle to Edge of Bumper
-
13.75 ft
-
Wheel Base
-
19.25 ft
-
Length - With Blade on Ground
-
44 ft
-
Hydraulic System - Steering
Steering System - Pump
-
Piston, variable displacement
-
Minimum Turning Radius - Over Blade
-
31 ft
-
Steering System - Circuit
-
Pilot, load sensing
-
Total Steering Angle
-
86 degrees
-
Relief Valve Setting
-
5004 psi
-
Operating Specifications
Operating Weight
-
224647 lb
-
Sound Performance Levels
Sound Performance
-
• The machine sound power level was measured according to
ISO 6395:2008. The measurement was conducted at 70 percent
of the maximum engine cooling fan speed.
• The operator sound pressure level was measured according to
ISO 6396:2008. The measurement was
-
Cab
ROPS/FOPS
-
ISO 3471:2008 and ISO 3449:2005 Level II Standards