Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
-
Note (2)
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
-
Note (3)
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
-
-
Note (4)
Machine Build Number 20B
-
-
Displacement
-
220 in³
-
Net Power - 2,200 rpm - SAE J1349
-
104 HP
-
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
-
104 HP
-
Power Train
-
Hydrostatic
-
Weights
Operating Weight
50733 lb
20640 lb
-
Operating Weight - LGP
-
21369 lb
-
Operating Weight - LGP, 762 mm/30 in
-
21810 lb
-
Note (2)
-
For machine with ripper, add 554 kg (1,222 lb).
-
Note (1)
-
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
-
Transmission
Power Train
Fully Automatic 4-Speed Powershift
-
-
Drive Pumps
-
1
-
Maximum Travel Speed - Forward
-
5.6 mile/h
-
Maximum Travel Speed - Reverse
-
6.2 mile/h
-
Track Motors
-
2
-
Relief Valve Settings
-
7033 psi
-
Service Refill Capacities
Fuel Tank
90 gal (US)
51.5 gal (US)
-
DEF Tank
7.4 gal (US)
-
-
Cooling System
-
5 gal (US)
-
Final Drive - Each - LGP
-
2.6 gal (US)
-
Crankcase - With Filter
-
2.8 gal (US)
-
Transmission - Hydraulic Tank
-
23.8 gal (US)
-
Final Drives - Each Side
-
2.6 gal (US)
-
Diesel Exhaust Fluid (DEF) Tank
-
4.9 gal (US)
-
D6 Push Arm
Operating Weight
48788 lb
-
-
Ground Pressure
7.9 psi
-
-
Width of Standard Shoe
24 in
-
-
Blade
Semi-Universal (SU)
-
-
Blade Capacity
7.5 yd³
-
-
D6 LGP (30-in) Push Arm
Operating Weight
50420 lb
-
-
Ground Pressure
6.5 psi
-
-
Width of Standard Shoe
30 in
-
-
Blade
Semi-Universal (SU)
-
-
Blade Capacity
7.6 yd³
-
-
D6 LGP (36-in) Push Arm
Operating Weight
52715 lb
-
-
Ground Pressure
5.2 psi
-
-
Width of Standard Shoe
36 in
-
-
Blade
Straight
-
-
Blade Capacity
5 yd³
-
-
D6 VPAT
Operating Weight
49108 lb
-
-
Ground Pressure
7.1 psi
-
-
Width of Standard Shoe
24 in
-
-
Blade
VPAT
-
-
Blade Capacity
5.4 yd³
-
-
D6 LGP (30-in) VPAT
Operating Weight
50733 lb
-
-
Ground Pressure
5.9 psi
-
-
Width of Standard Shoe
30 in
-
-
Blade
VPAT
-
-
Blade Capacity
5.9 yd³
-
-
D6 LGP (36-in) VPAT
Operating Weight
51912 lb
-
-
Ground Pressure
5 psi
-
-
Width of Standard Shoe
36 in
-
-
Blade
VPAT
-
-
Blade Capacity
6.5 yd³
-
-
Sustainability
Recyclability
98%
-
-
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
-
Hydraulic Controls
Pump Output
-
17.2 gal/min
-
Relief Valve Settings
-
2988 psi
-
Ripper
Type
-
Parallelogram
-
Number of Shanks
-
3
-
Height
-
6.5 in
-
Weight
-
1222 lb
-
Maximum Digging Depth
-
13.3 in
-
Maximum Reach - Ground Line
-
30.2 in
-
Overall Width
-
67.3 in
-
Maximum Ground Clearance Under Tip
-
17.6 in
-
Undercarriage
Ground Pressure - LGP
-
4.5 psi
-
Track Gauge - LGP
-
69 in
-
Length - Track on Ground - LGP
-
91 in
-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
-
40
-
Ground Pressure - LGP, 762 mm (30 in)
-
3.9 psi
-
Length - Track on Ground - LGP, 762 mm (30 in)
-
91 in
-
Shoe Width - LGP
-
26 in
-
Shoe Width - LGP, 762 mm (30 in)
-
30 in
-
Track Gauge
-
63 in
-
Number of Rollers - Each Side
-
7
-
Track Gauge - LGP, 762 mm (30 in)
-
73 in
-
Ground Pressure
-
5.7 psi
-
Length of Track on Ground
-
91 in
-
Number of Shoes - Each Side - Abrasion Undercarriage
-
36
-
Shoe Width - Standard
-
20 in
-
Dimensions
BLADE: Blade Width - LGP
-
126.7 in
-
Track Gauge - LGP, 762 mm (30 in)
-
73 in
-
BLADE: Digging Depth - LGP
-
23.2 in
-
Track Gauge - LGP
-
67.9 in
-
BLADE: Blade Capacity (SAE) - LGP
-
3.06 yd³
-
BLADE: Blade Width at Maximum Angle - LGP
-
115.8 in
-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
-
52° to 58°
-
Ground Clearance - LGP, 762 mm (30 in)
-
13 in
-
BLADE: Blade Height - LGP
-
39.8 in
-
BLADE: Blade Lift Height - LGP
-
30.2 in
-
Ground Clearance - LGP
-
13 in
-
Overall Length - With Blade - LGP, 762 mm (30 in)
-
169.6 in
-
Overall Length - With Blade - LGP
-
169.6 in
-
Note
-
Abrasion Undercarriage
-
BLADE: Maximum Tilt - LGP
-
17.7 in
-
BLADE: Maximum Angle (either side) - LGP
-
25°
-
BLADE: Blade Capacity (SAE) - Standard
-
2.86 yd³
-
Track Gauge - Standard
-
63 in
-
BLADE: Digging Depth - Standard
-
23.8 in
-
BLADE: Blade Lift Height - Standard
-
30.2 in
-
Ground Clearance - Standard
-
13 in
-
Overall Length - With Blade - Standard
-
170.7 in
-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard
-
52° to 58°
-
BLADE: Blade Height - Standard
-
42.2 in
-
BLADE: Maximum Tilt - Standard
-
15.8 in
-
BLADE: Blade Width - Standard
-
109.5 in
-
BLADE: Blade Width at Maximum Angle - Standard
-
103.8 in
-
BLADE: Maximum Angle (either side) - Standard
-
25°
-
Length of Basic Dozer (without blade) - Standard
-
128.7 in
-
Dozer Height - Standard
-
109 in
-
Width of Dozer (standard shoes, no blade) - LGP
-
92.9 in
-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
-
103.5 in
-
Length of Basic Dozer (without blade) - LGP
-
128.7 in
-
Dozer Height - LGP, 762 mm (30 in)
-
109 in
-
Width of Dozer (standard shoes, no blade) - Standard
-
83 in
-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)