CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D6 Dozer
    View Product
    854 Wheel Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove
    D7 Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B Cat C32B Cat® C3.6 Cat C9.3B
    Power - Net 215 HP - 104 HP 265 HP
    Net Power - Rated - ISO 9249/SAE J1349 215 HP - - 265 HP
    Net Power (Rated) - ISO 9249 (DIN) 219 mhp - - 268 mhp
    Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V - - U.S. EPA Tier 4 Final/EU Stage V/Japan 2014/Korea Stage V/China Nonroad Stage IV
    Note (1) Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Net power at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect at the t
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( Net torque rise meets SAE J139. All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO (
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. No engine derating required up to 3050 m (10,000 ft) altitude. - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document.
    Note (4) Machine Build Number 20B - - Machine Build Number 17A
    Gross Power - 907 HP - -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - 900 HP - -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - 814 HP - -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - 907 HP - -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - 823 HP - -
    Rated Speed - 1750 r/min - -
    Bore - 5.7 in - -
    Stroke - 6.4 in - -
    Displacement - 1958 in² 220 in³ -
    Peak Torque - 1,200 rpm - 3139 lb/ft - -
    Torque Rise - 30 % - -
    Net Power - 2,200 rpm - SAE J1349 - - 104 HP -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 104 HP -
    Power Train - - Hydrostatic -

    Weights
    Operating Weight 50733 lb 224647 lb 20640 lb 65644 lb
    Operating Weight - LGP - - 21369 lb -
    Operating Weight - LGP, 762 mm/30 in - - 21810 lb -
    Note (2) - - For machine with ripper, add 554 kg (1,222 lb). -
    Note (1) - - Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. Standard SU operating weight includes ripper with three shanks adding approximately 2993 kg/6596 lbs. LGP S operating weight with drawbar.

    Transmission
    Power Train Fully Automatic 4-Speed Powershift - - Fully Automatic 4-Speed
    Transmission Type - Cat Planetary Power Shift - -
    Converter Drive - Forward 1 - 4.4 mile/h - -
    Converter Drive - Forward 2 - 7.7 mile/h - -
    Converter Drive - Forward 3 - 13.2 mile/h - -
    Converter Drive - Reverse 1 - 4.8 mile/h - -
    Converter Drive - Reverse 2 - 8.4 mile/h - -
    Converter Drive - Reverse 3 - 14.6 mile/h - -
    Direct Drive - Forward 1 - Lock-up disabled - -
    Direct Drive - Forward 2 - 8.1 mile/h - -
    Direct Drive - Forward 3 - 14.2 mile/h - -
    Direct Drive - Reverse 1 - 5 mile/h - -
    Direct Drive - Reverse 2 - 8.9 mile/h - -
    Direct Drive - Reverse 3 - 15.6 mile/h - -
    Note - Travel speeds based on 45/65-45 L-5 46 ply tires. - -
    Drive Pumps - - 1 -
    Maximum Travel Speed - Forward - - 5.6 mile/h -
    Maximum Travel Speed - Reverse - - 6.2 mile/h -
    Track Motors - - 2 -
    Relief Valve Settings - - 7033 psi -

    Service Refill Capacities
    Fuel Tank 90 gal (US) - 51.5 gal (US) 123 gal (US)
    DEF Tank 7.4 gal (US) - - 12 gal (US)
    Fuel Tank - Standard - 413 gal (US) - -
    Cooling System - 53 gal (US) 5 gal (US) -
    Crankcase - 32 gal (US) - -
    Transmission - 45 gal (US) - -
    Differential - Final Drives - Front - 98 gal (US) - -
    Differential - Final Drives - Rear - 90 gal (US) - -
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - 77 gal (US) - -
    Note (1) - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo - -
    Final Drive - Each - LGP - - 2.6 gal (US) -
    Crankcase - With Filter - - 2.8 gal (US) -
    Transmission - Hydraulic Tank - - 23.8 gal (US) -
    Final Drives - Each Side - - 2.6 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US) -

    D6 Push Arm
    Operating Weight 48788 lb - - -
    Ground Pressure 7.9 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.5 yd³ - - -

    D6 LGP (30-in) Push Arm
    Operating Weight 50420 lb - - -
    Ground Pressure 6.5 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.6 yd³ - - -

    D6 LGP (36-in) Push Arm
    Operating Weight 52715 lb - - -
    Ground Pressure 5.2 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade Straight - - -
    Blade Capacity 5 yd³ - - -

    D6 VPAT
    Operating Weight 49108 lb - - -
    Ground Pressure 7.1 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade VPAT - - -
    Blade Capacity 5.4 yd³ - - -

    D6 LGP (30-in) VPAT
    Operating Weight 50733 lb - - -
    Ground Pressure 5.9 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade VPAT - - -
    Blade Capacity 5.9 yd³ - - -

    D6 LGP (36-in) VPAT
    Operating Weight 51912 lb - - -
    Ground Pressure 5 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade VPAT - - -
    Blade Capacity 6.5 yd³ - - -

    Sustainability
    Recyclability 98% - - 98%

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes.

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - 161 gal/min - -
    Cylinders, Double Acting - Lift, Bore and Stroke - 177 mm × 1760 mm (0.58 ft × 5.8 ft) - -
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - 267 mm × 286 mm (0.88 ft × 0.94 ft) - -

    Axles
    Front - Fixed - -
    Rear - Trunnion - -

    Brakes
    Brakes - Meets ISO 3540:2011 - -

    Blades
    Blade Capacities - 30.5 to 44.8 m3 (40 to 58.6 yd3) - -

    Dimensions (Approximate)
    Height - Top of ROPS - 18.25 ft - -
    Height - Top of Exhaust Pipe - 17.17 ft - -
    Height - Top of Hood - 13 ft - -
    Ground Clearance - 27 in - -
    Centerline of Front Axle to Hitch - 9.67 ft - -
    Centerline of Rear Axle to Edge of Bumper - 13.75 ft - -
    Wheel Base - 19.25 ft - -
    Length - With Blade on Ground - 44 ft - -

    Hydraulic System - Steering
    Steering System - Pump - Piston, variable displacement - -
    Minimum Turning Radius - Over Blade - 31 ft - -
    Steering System - Circuit - Pilot, load sensing - -
    Total Steering Angle - 86 degrees - -
    Relief Valve Setting - 5004 psi - -

    Operating Specifications
    Operating Weight - 224647 lb - -

    Sound Performance Levels
    Sound Performance - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was - -

    Cab
    ROPS/FOPS - ISO 3471:2008 and ISO 3449:2005 Level II Standards - -
    ROPS - - ISO 3471:2008 -
    FOPS - - ISO 3449:2005 Level II -

    Hydraulic Controls
    Pump Output - - 17.2 gal/min -
    Relief Valve Settings - - 2988 psi -

    Ripper
    Type - - Parallelogram -
    Number of Shanks - - 3 -
    Height - - 6.5 in -
    Weight - - 1222 lb -
    Maximum Digging Depth - - 13.3 in -
    Maximum Reach - Ground Line - - 30.2 in -
    Overall Width - - 67.3 in -
    Maximum Ground Clearance Under Tip - - 17.6 in -

    Undercarriage
    Ground Pressure - LGP - - 4.5 psi -
    Track Gauge - LGP - - 69 in -
    Length - Track on Ground - LGP - - 91 in -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 40 -
    Ground Pressure - LGP, 762 mm (30 in) - - 3.9 psi -
    Length - Track on Ground - LGP, 762 mm (30 in) - - 91 in -
    Shoe Width - LGP - - 26 in -
    Shoe Width - LGP, 762 mm (30 in) - - 30 in -
    Track Gauge - - 63 in -
    Number of Rollers - Each Side - - 7 -
    Track Gauge - LGP, 762 mm (30 in) - - 73 in -
    Ground Pressure - - 5.7 psi -
    Length of Track on Ground - - 91 in -
    Number of Shoes - Each Side - Abrasion Undercarriage - - 36 -
    Shoe Width - Standard - - 20 in -

    Dimensions
    BLADE: Blade Width - LGP - - 126.7 in -
    Track Gauge - LGP, 762 mm (30 in) - - 73 in -
    BLADE: Digging Depth - LGP - - 23.2 in -
    Track Gauge - LGP - - 67.9 in -
    BLADE: Blade Capacity (SAE) - LGP - - 3.06 yd³ -
    BLADE: Blade Width at Maximum Angle - LGP - - 115.8 in -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58° -
    Ground Clearance - LGP, 762 mm (30 in) - - 13 in -
    BLADE: Blade Height - LGP - - 39.8 in -
    BLADE: Blade Lift Height - LGP - - 30.2 in -
    Ground Clearance - LGP - - 13 in -
    Overall Length - With Blade - LGP, 762 mm (30 in) - - 169.6 in -
    Overall Length - With Blade - LGP - - 169.6 in -
    Note - - Abrasion Undercarriage -
    BLADE: Maximum Tilt - LGP - - 17.7 in -
    BLADE: Maximum Angle (either side) - LGP - - 25° -
    BLADE: Blade Capacity (SAE) - Standard - - 2.86 yd³ -
    Track Gauge - Standard - - 63 in -
    BLADE: Digging Depth - Standard - - 23.8 in -
    BLADE: Blade Lift Height - Standard - - 30.2 in -
    Ground Clearance - Standard - - 13 in -
    Overall Length - With Blade - Standard - - 170.7 in -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58° -
    BLADE: Blade Height - Standard - - 42.2 in -
    BLADE: Maximum Tilt - Standard - - 15.8 in -
    BLADE: Blade Width - Standard - - 109.5 in -
    BLADE: Blade Width at Maximum Angle - Standard - - 103.8 in -
    BLADE: Maximum Angle (either side) - Standard - - 25° -
    Length of Basic Dozer (without blade) - Standard - - 128.7 in -
    Dozer Height - Standard - - 109 in -
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - 103.5 in -
    Length of Basic Dozer (without blade) - LGP - - 128.7 in -
    Dozer Height - LGP, 762 mm (30 in) - - 109 in -
    Width of Dozer (standard shoes, no blade) - Standard - - 83 in -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - 128.7 in -
    Dozer Height - LGP - - 109 in -

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - 32150 lb -
    Control - - Hydraulic -
    Rope Diameter - Optional - - 0.75 in -
    Drum Capacity - Optional Cable - - 195 ft -
    Maximum Line Speed - Full Drum - - 79 ft/min -
    Drum Capacity - Recommended Cable - - 277 ft -
    Winch Drive - - Hydraulic -
    Weight - - 1747 lb -
    Maximum Line Pull - Full Drum - - 20350 lb -
    Rope Diameter - Recommended - - 0.63 in -
    Maximum Line Speed - Bare Drum - - 50 ft/min -
    Speed - - Variable -
    Winch Length - - 35.63 in -
    Drum Diameter - - 8 in -
    Overall width - - 27.91 in -
    Drum Width - - 9.65 in -
    Throat Clearance - - 5.6 in -

    High Performance Winch
    Winch length - - 27.76 in -
    Rope diameter – optional - - 0.75 in -
    Maximum line speed – bare drum - - 131 ft/min -
    Maximum line pull – bare drum - - 40000 lb -
    Weight - - 1345 lb -
    Drum capacity – optional - - 256 ft -
    Maximum line speed – full drum - - 207 ft/min -
    Rope diameter – recommended - - 0.63 in -
    Winch drive - - Hydrostatic -
    Throat clearance - - 6.75 in -
    Drum diameter - - 10 in -
    Overall width - - 29.2 in -
    Drum width - - 10.8 in -
    Maximum line pull – full drum - - 25000 lb -
    Speed - - Variable -
    Drum capacity – recommended cable - - 371 ft -
    Control - - Hydraulic -

    Standard SU
    Operating Weight - - - 65644 lb
    Ground Pressure - - - 10 psi
    Width of Standard Shoe - - - 24 in
    Blade - - - Semi-Universal (SU)
    Blade Capacity - - - 10 yd³

    LGP S
    Operating Weight - - - 63220 lb
    Ground Pressure - - - 6 psi
    Width of Standard Shoe - - - 36 in
    Blade - - - Straight (S)
    Blade Capacity - - - 8 yd³

    Waste Handler
    Operating Weight - - - 62035 lb
    Ground Pressure - - - 10 psi
    Width of Standard Shoe - - - 24 in
    Blade - - - Universal Landfill (U)
    Blade Capacity - - - 22 yd³

    Note (2) - - - Configurations and features may vary by region. Please consult your Cat dealer for availability in your area.
    Add a Similar Product: