CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D6 Dozer
    View Product
    D11 Dozer
    View Product Remove
    D3 Track-Type Tractor
    View Product Remove
    844 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C9.3B - Cat® C3.6 C27 Cat®
    Power - Net 215 HP - 104 HP -
    Net Power - Rated - ISO 9249/SAE J1349 215 HP - - -
    Net Power (Rated) - ISO 9249 (DIN) 219 mhp - - -
    Emissions U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V - - U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2
    Note (1) Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a - Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. -
    Note (2) Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. -
    Note (3) Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - - -
    Note (4) Machine Build Number 20B - - -
    Displacement - - 220 in³ 1649.5 in³
    Net Power - 2,200 rpm - SAE J1349 - - 104 HP -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - - 104 HP -
    Power Train - - Hydrostatic -
    Rated Speed - - - 1800 r/min
    Gross Power - ISO 14396 - - - 752 HP
    Gross Power - SAE J1995 - - - 766 HP
    Net Power - SAE J1349 - Standard Ambient - - - 699 HP
    Net Power - SAE J1349 - High Ambient - - - 648 HP
    Bore - - - 5.4 in
    Stroke - - - 6 in
    Peak Torque - Speed - - - 2624 lb/ft
    Torque Rise - - - 18 %

    Weights
    Operating Weight 50733 lb 229800 lb 20640 lb -
    Operating Weight - Carrydozer - 250665 lb - -
    Note (1) - D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. -
    Note (2) - D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. For machine with ripper, add 554 kg (1,222 lb). -
    Operating Weight - LGP - - 21369 lb -
    Operating Weight - LGP, 762 mm/30 in - - 21810 lb -

    Transmission
    Power Train Fully Automatic 4-Speed Powershift - - -
    1.0 Forward - 2.5 mile/h - -
    2.0 Forward - 4.4 mile/h - -
    3.0 Forward - 7.6 mile/h - -
    1.0 Reverse - 3 mile/h - -
    2.0 Reverse - 5.3 mile/h - -
    3.0 Reverse - 9.1 mile/h - -
    Drawbar Pull - 3 Forward - 46250 ft·lbf - -
    Drawbar Pull - 1 Forward - 148200 ft·lbf - -
    Drawbar Pull - 2 Forward - 82300 ft·lbf - -
    Drive Pumps - - 1 -
    Maximum Travel Speed - Forward - - 5.6 mile/h -
    Maximum Travel Speed - Reverse - - 6.2 mile/h -
    Track Motors - - 2 -
    Relief Valve Settings - - 7033 psi -
    Transmission Type - - - Cat Planetary Power Shift
    Converter Drive - Forward 1 - - - 4.5 mile/h
    Converter Drive - Forward 2 - - - 8.3 mile/h
    Converter Drive - Forward 3 - - - 14.2 mile/h
    Converter Drive - Reverse 1 - - - 4.9 mile/h
    Converter Drive - Reverse 2 - - - 9.1 mile/h
    Converter Drive - Reverse 3 - - - 15.5 mile/h
    Direct Drive - Forward 1 - - - Lock-up disabled
    Direct Drive - Forward 2 - - - 8.5 mile/h
    Direct Drive - Forward 3 - - - 15.2 mile/h
    Direct Drive - Reverse 1 - - - 5.4 mile/h
    Direct Drive - Reverse 2 - - - 9.6 mile/h
    Direct Drive - Reverse 3 - - - 16.4 mile/h

    Service Refill Capacities
    Fuel Tank 90 gal (US) - 51.5 gal (US) -
    DEF Tank 7.4 gal (US) - - -
    Cooling System - 46.8 gal (US) 5 gal (US) 54.9 gal (US)
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) - -
    Engine Crankcase - 35.1 gal (US) - -
    Power Train - 120 gal (US) - -
    Power Train - Refill Volume - 103.3 gal (US) - -
    Final Drive - Each - 12.4 gal (US) - -
    Roller Frames - Each - 24.8 gal (US) - -
    Hydraulic Tank - 42.2 gal (US) - -
    Hydraulic System Tank and Chassis - 64.7 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) - -
    Final Drive - Each - LGP - - 2.6 gal (US) -
    Crankcase - With Filter - - 2.8 gal (US) -
    Transmission - Hydraulic Tank - - 23.8 gal (US) -
    Final Drives - Each Side - - 2.6 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank - - 4.9 gal (US) -
    Fuel Tank - Standard - - - 286.6 gal (US)
    Crankcase - - - 20 gal (US)
    Transmission - - - 29.1 gal (US)
    Differential - Final Drives - Front - - - 71.6 gal (US)
    Differential - Final Drives - Rear - - - 68.9 gal (US)
    Hydraulic System - Implement and Hydraulic Fan - - - 68.9 gal (US)
    Hydraulic System - Steering and Braking - - - 34.9 gal (US)

    D6 Push Arm
    Operating Weight 48788 lb - - -
    Ground Pressure 7.9 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.5 yd³ - - -

    D6 LGP (30-in) Push Arm
    Operating Weight 50420 lb - - -
    Ground Pressure 6.5 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade Semi-Universal (SU) - - -
    Blade Capacity 7.6 yd³ - - -

    D6 LGP (36-in) Push Arm
    Operating Weight 52715 lb - - -
    Ground Pressure 5.2 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade Straight - - -
    Blade Capacity 5 yd³ - - -

    D6 VPAT
    Operating Weight 49108 lb - - -
    Ground Pressure 7.1 psi - - -
    Width of Standard Shoe 24 in - - -
    Blade VPAT - - -
    Blade Capacity 5.4 yd³ - - -

    D6 LGP (30-in) VPAT
    Operating Weight 50733 lb - - -
    Ground Pressure 5.9 psi - - -
    Width of Standard Shoe 30 in - - -
    Blade VPAT - - -
    Blade Capacity 5.9 yd³ - - -

    D6 LGP (36-in) VPAT
    Operating Weight 51912 lb - - -
    Ground Pressure 5 psi - - -
    Width of Standard Shoe 36 in - - -
    Blade VPAT - - -
    Blade Capacity 6.5 yd³ - - -

    Sustainability
    Recyclability 98% - - -

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP - -
    Displacement - 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP - -
    Note (1) - *Excludes all fan losses. - -
    Note (2) - Engine ratings apply at 1,800 rpm. - -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ - -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in - -
    U-Blade Capacity - 45 yd³ - -
    U-Blade Width - 249.6 in - -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ - -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in - -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ - -
    Carry Dozer - Width with blade (over end bits) - 263.9 in - -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 - -
    Displacement - 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP - -
    Note (1) - *Excludes all fan losses. - -
    Note (2) - Engine ratings apply at 1,800 rpm. - -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) - -
    Fuel Tank - Usable Volume - 475 gal (US) - -

    Hydraulic Controls
    Pump Type - Variable displacement piston pump - -
    Combined Pump Output - Implement - 177 gal/min - -
    Pump Output - - 17.2 gal/min -
    Relief Valve Settings - - 2988 psi -

    Undercarriage
    Shoe Type - Extreme Service - -
    Width - Shoe - 28 in - -
    Width - Shoe - CD - 36 in - -
    Shoes/Side - 41 - -
    Grouser Height - 4 in - -
    Pitch - 12.5 in - -
    Ground Clearance* - 30.6 in - -
    Track Gauge - 114 in 63 in -
    Length - Track on Ground - 175 in - -
    Ground Contact Area - 9781 in² - -
    Ground Contact Area - CD - 12605 in² - -
    Track Rollers/Side - 8 - -
    Number of Carrier Rollers - 1 per side (optional) - -
    Ground Pressure - LGP - - 4.5 psi -
    Track Gauge - LGP - - 69 in -
    Length - Track on Ground - LGP - - 91 in -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - - 40 -
    Ground Pressure - LGP, 762 mm (30 in) - - 3.9 psi -
    Length - Track on Ground - LGP, 762 mm (30 in) - - 91 in -
    Shoe Width - LGP - - 26 in -
    Shoe Width - LGP, 762 mm (30 in) - - 30 in -
    Number of Rollers - Each Side - - 7 -
    Track Gauge - LGP, 762 mm (30 in) - - 73 in -
    Ground Pressure - - 5.7 psi -
    Length of Track on Ground - - 91 in -
    Number of Shoes - Each Side - Abrasion Undercarriage - - 36 -
    Shoe Width - Standard - - 20 in -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb - -
    Maximum penetration depth (standard tip) - 63.5 in - -
    Pryout Force - 148510 lb - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb - -
    Maximum penetration depth (standard tip) - 85.5 in - -
    Pryout Force - 148510 lb - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in - -
    Maximum Penetration Force - Shank Vertical - 77350 lb - -
    Maximum Penetration - Standard Tip - 43.3 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb - -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in - -
    Length with SU-Blade** - No rear attachment - 345.1 in - -
    Overall Length SU-Blade and SS Ripper** - 421.7 in - -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 - -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II - -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). - -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). - -

    Dimensions - D11
    Ground Clearance* - 31.4 in - -
    Track Gauge - 114 in - -
    Width at Outside of Track (710 mm Track Shoe) - 142 in - -
    Height (ROPS/canopy)* - 185.9 in - -
    Length of Track on Ground - 175 in - -
    Length with SU-Blade** - No rear attachment - 337.8 in - -
    Overall Length SU-Blade and SS Ripper** - 414.4 in - -
    Note - *Includes grouser height for total dimensions on hard surfaces. - -

    Ripper
    Type - - Parallelogram -
    Number of Shanks - - 3 -
    Height - - 6.5 in -
    Weight - - 1222 lb -
    Maximum Digging Depth - - 13.3 in -
    Maximum Reach - Ground Line - - 30.2 in -
    Overall Width - - 67.3 in -
    Maximum Ground Clearance Under Tip - - 17.6 in -

    Dimensions
    BLADE: Blade Width - LGP - - 126.7 in -
    Track Gauge - LGP, 762 mm (30 in) - - 73 in -
    BLADE: Digging Depth - LGP - - 23.2 in -
    Track Gauge - LGP - - 67.9 in -
    BLADE: Blade Capacity (SAE) - LGP - - 3.06 yd³ -
    BLADE: Blade Width at Maximum Angle - LGP - - 115.8 in -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP - - 52° to 58° -
    Ground Clearance - LGP, 762 mm (30 in) - - 13 in -
    BLADE: Blade Height - LGP - - 39.8 in -
    BLADE: Blade Lift Height - LGP - - 30.2 in -
    Ground Clearance - LGP - - 13 in -
    Overall Length - With Blade - LGP, 762 mm (30 in) - - 169.6 in -
    Overall Length - With Blade - LGP - - 169.6 in -
    Note - - Abrasion Undercarriage -
    BLADE: Maximum Tilt - LGP - - 17.7 in -
    BLADE: Maximum Angle (either side) - LGP - - 25° -
    BLADE: Blade Capacity (SAE) - Standard - - 2.86 yd³ -
    Track Gauge - Standard - - 63 in -
    BLADE: Digging Depth - Standard - - 23.8 in -
    BLADE: Blade Lift Height - Standard - - 30.2 in -
    Ground Clearance - Standard - - 13 in -
    Overall Length - With Blade - Standard - - 170.7 in -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard - - 52° to 58° -
    BLADE: Blade Height - Standard - - 42.2 in -
    BLADE: Maximum Tilt - Standard - - 15.8 in -
    BLADE: Blade Width - Standard - - 109.5 in -
    BLADE: Blade Width at Maximum Angle - Standard - - 103.8 in -
    BLADE: Maximum Angle (either side) - Standard - - 25° -
    Length of Basic Dozer (without blade) - Standard - - 128.7 in -
    Dozer Height - Standard - - 109 in -
    Width of Dozer (standard shoes, no blade) - LGP - - 92.9 in -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) - - 103.5 in -
    Length of Basic Dozer (without blade) - LGP - - 128.7 in -
    Dozer Height - LGP, 762 mm (30 in) - - 109 in -
    Width of Dozer (standard shoes, no blade) - Standard - - 83 in -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) - - 128.7 in -
    Dozer Height - LGP - - 109 in -

    Cab
    ROPS - - ISO 3471:2008 -
    FOPS - - ISO 3449:2005 Level II -
    ROPS/FOPS - - - ISO 3471:2008 and ISO 3449:2005 Level II Standards

    Retrieval Winch
    Maximum Line Pull - Bare Drum - - 32150 lb -
    Control - - Hydraulic -
    Rope Diameter - Optional - - 0.75 in -
    Drum Capacity - Optional Cable - - 195 ft -
    Maximum Line Speed - Full Drum - - 79 ft/min -
    Drum Capacity - Recommended Cable - - 277 ft -
    Winch Drive - - Hydraulic -
    Weight - - 1747 lb -
    Maximum Line Pull - Full Drum - - 20350 lb -
    Rope Diameter - Recommended - - 0.63 in -
    Maximum Line Speed - Bare Drum - - 50 ft/min -
    Speed - - Variable -
    Winch Length - - 35.63 in -
    Drum Diameter - - 8 in -
    Overall width - - 27.91 in -
    Drum Width - - 9.65 in -
    Throat Clearance - - 5.6 in -

    High Performance Winch
    Winch length - - 27.76 in -
    Rope diameter – optional - - 0.75 in -
    Maximum line speed – bare drum - - 131 ft/min -
    Maximum line pull – bare drum - - 40000 lb -
    Weight - - 1345 lb -
    Drum capacity – optional - - 256 ft -
    Maximum line speed – full drum - - 207 ft/min -
    Rope diameter – recommended - - 0.63 in -
    Winch drive - - Hydrostatic -
    Throat clearance - - 6.75 in -
    Drum diameter - - 10 in -
    Overall width - - 29.2 in -
    Drum width - - 10.8 in -
    Maximum line pull – full drum - - 25000 lb -
    Speed - - Variable -
    Drum capacity – recommended cable - - 371 ft -
    Control - - Hydraulic -

    Operating Specifications
    Operating Weight - - - 165089 lb
    Blade Capacities - - - 15.9 - 30.7 m3 (20.7 - 40.2 yd3)

    Hydraulic System - Lift/Tilt
    Output at 2,000 rpm and 6900 kPa (1,000 psi) - - - 82 gal/min
    Cylinders, Double Acting - Lift, Bore and Stroke - - - 133 mm × 1535 mm (5.25 in × 60.4 in)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - - 210 mm × 188 mm (8.25 in × 7.4 in)
    Relief Valve Setting - Bulldozer (Large Pump) - - - 2700 psi
    Relief Valve Setting - Tilt Cylinders (Small Pump) - - - 2920 psi

    Hydraulic System - Steering
    Steering System - Circuit - - - Pilot, load sensing
    Steering System - Pump - - - Piston, variable displacement
    Minimum Turning Radius - Over Blade - - - 34 ft
    Total Steering Angle - - - 35 °
    Maximum Flow - - - 94.3 gal/min
    Relief Valve Setting - - - 4500 psi

    Axles
    Front - - - Fixed
    Rear - - - Trunnion
    Oscillation Angle - - - 8.5 °

    Brakes
    Brakes - - - Meets ISO 3540:2011

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - - - 69 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 115 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - - - 69 dB(A)
    Machine Sound Level (ISO 6395:2008) - - - 113 dB(A)

    Dimensions (Approximate)
    Height - Top of ROPS - - - 17.2 ft
    Height - Top of Exhaust Pipe - - - 16.6 ft
    Height - Top of Hood - - - 12.7 ft
    Ground Clearance - - - 2 ft
    Centerline of Front Axle to Hitch - - - 7.5 ft
    Centerline of Rear Axle to Edge of Bumper - - - 12.5 ft
    Wheel Base - - - 15.1 ft
    Length - With Blade on Ground - - - 36.5 ft
    Add a Similar Product: