|
|
|
|
|
Engine |
Engine Model |
Cat C9.3B |
- |
Cat C9.3B |
Cat® C3.6 |
Power - Net |
215 HP |
- |
215 HP |
104 HP |
Net Power - Rated - ISO 9249/SAE J1349 |
215 HP |
- |
215 HP |
- |
Net Power (Rated) - ISO 9249 (DIN) |
219 mhp |
- |
219 mhp |
- |
Emissions |
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V |
- |
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V |
- |
Note (1) |
Rated horsepower at 2,200 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a |
- |
Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a |
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. |
Note (2) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
- |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( |
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. |
Note (3) |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
- |
Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. |
- |
Note (4) |
Machine Build Number 20B |
- |
Machine Build Number 20B |
- |
Displacement |
- |
- |
- |
220 in³ |
Net Power - 2,200 rpm - SAE J1349 |
- |
- |
- |
104 HP |
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 |
- |
- |
- |
104 HP |
Power Train |
- |
- |
- |
Hydrostatic |
Weights |
Operating Weight |
50733 lb |
110225 lb |
51333 lb |
20640 lb |
Shipping Weight |
- |
84373 lb |
- |
- |
Note (1) |
- |
D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. |
- |
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. |
Note (2) |
- |
D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. |
- |
For machine with ripper, add 554 kg (1,222 lb). |
Operating Weight - LGP |
- |
- |
- |
21369 lb |
Operating Weight - LGP, 762 mm/30 in |
- |
- |
- |
21810 lb |
Transmission |
Power Train |
Fully Automatic 4-Speed Powershift |
- |
Electric Drive |
- |
1.0 Forward |
- |
2.2 mile/h |
- |
- |
2.0 Forward |
- |
3.9 mile/h |
- |
- |
3.0 Forward |
- |
6.8 mile/h |
- |
- |
1.0 Reverse |
- |
2.7 mile/h |
- |
- |
2.0 Reverse |
- |
4.8 mile/h |
- |
- |
3.0 Reverse |
- |
8.4 mile/h |
- |
- |
Type |
- |
Planetary powershift |
- |
- |
Drive Pumps |
- |
- |
- |
1 |
Maximum Travel Speed - Forward |
- |
- |
- |
5.6 mile/h |
Maximum Travel Speed - Reverse |
- |
- |
- |
6.2 mile/h |
Track Motors |
- |
- |
- |
2 |
Relief Valve Settings |
- |
- |
- |
7033 psi |
Service Refill Capacities |
Fuel Tank |
90 gal (US) |
- |
90 gal (US) |
51.5 gal (US) |
DEF Tank |
7.4 gal (US) |
- |
7.4 gal (US) |
- |
Cooling System |
- |
- |
- |
5 gal (US) |
Final Drive - Each - LGP |
- |
- |
- |
2.6 gal (US) |
Crankcase - With Filter |
- |
- |
- |
2.8 gal (US) |
Transmission - Hydraulic Tank |
- |
- |
- |
23.8 gal (US) |
Final Drives - Each Side |
- |
- |
- |
2.6 gal (US) |
Diesel Exhaust Fluid (DEF) Tank |
- |
- |
- |
4.9 gal (US) |
D6 Push Arm |
Operating Weight |
48788 lb |
- |
- |
- |
Ground Pressure |
7.9 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
Semi-Universal (SU) |
- |
- |
- |
Blade Capacity |
7.5 yd³ |
- |
- |
- |
D6 LGP (30-in) Push Arm |
Operating Weight |
50420 lb |
- |
- |
- |
Ground Pressure |
6.5 psi |
- |
- |
- |
Width of Standard Shoe |
30 in |
- |
- |
- |
Blade |
Semi-Universal (SU) |
- |
- |
- |
Blade Capacity |
7.6 yd³ |
- |
- |
- |
D6 LGP (36-in) Push Arm |
Operating Weight |
52715 lb |
- |
- |
- |
Ground Pressure |
5.2 psi |
- |
- |
- |
Width of Standard Shoe |
36 in |
- |
- |
- |
Blade |
Straight |
- |
- |
- |
Blade Capacity |
5 yd³ |
- |
- |
- |
D6 VPAT |
Operating Weight |
49108 lb |
- |
- |
- |
Ground Pressure |
7.1 psi |
- |
- |
- |
Width of Standard Shoe |
24 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
5.4 yd³ |
- |
- |
- |
D6 LGP (30-in) VPAT |
Operating Weight |
50733 lb |
- |
- |
- |
Ground Pressure |
5.9 psi |
- |
- |
- |
Width of Standard Shoe |
30 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
5.9 yd³ |
- |
- |
- |
D6 LGP (36-in) VPAT |
Operating Weight |
51912 lb |
- |
- |
- |
Ground Pressure |
5 psi |
- |
- |
- |
Width of Standard Shoe |
36 in |
- |
- |
- |
Blade |
VPAT |
- |
- |
- |
Blade Capacity |
6.5 yd³ |
- |
- |
- |
Sustainability |
Recyclability |
98% |
- |
98% |
- |
Air Conditioning System |
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Engine - U.S. EPA Tier 2/3 Equivalent |
Engine Model |
- |
Cat® C18 |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 |
- |
452 HP |
- |
- |
Bore |
- |
5.7 in³ |
- |
- |
Stroke |
- |
7.2 in |
- |
- |
Displacement |
- |
1106 in³ |
- |
- |
Engine Power - Gross SAE J1995 |
- |
487 HP |
- |
- |
Engine Power - ISO 14396 |
- |
479 HP |
- |
- |
Emissions |
- |
U.S. EPA Tier 2 or Tier 3 equivalent |
- |
- |
Note (1) |
- |
All engine ratings apply at 1,750 rpm. |
- |
- |
Note (2) |
- |
No derating required up to 4267 m (14,000 ft) altitude. |
- |
- |
Undercarriage |
Shoe Type |
- |
Extreme Service |
- |
- |
Width - Shoe |
- |
24 in |
- |
- |
Shoes/Side |
- |
43 |
- |
- |
Grouser Height |
- |
3.3 in |
- |
- |
Pitch |
- |
9.4 in |
- |
- |
Ground Clearance |
- |
18.1 in |
- |
- |
Track Gauge |
- |
88.6 in |
- |
63 in |
Length - Track on Ground |
- |
136.6 in |
- |
- |
Ground Contact Area |
- |
45.6 ft² |
- |
- |
Track Rollers/Side |
- |
8 |
- |
- |
Number of Carrier Rollers |
- |
1 per side (optional) |
- |
- |
Ground Pressure - LGP |
- |
- |
- |
4.5 psi |
Track Gauge - LGP |
- |
- |
- |
69 in |
Length - Track on Ground - LGP |
- |
- |
- |
91 in |
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage |
- |
- |
- |
40 |
Ground Pressure - LGP, 762 mm (30 in) |
- |
- |
- |
3.9 psi |
Length - Track on Ground - LGP, 762 mm (30 in) |
- |
- |
- |
91 in |
Shoe Width - LGP |
- |
- |
- |
26 in |
Shoe Width - LGP, 762 mm (30 in) |
- |
- |
- |
30 in |
Number of Rollers - Each Side |
- |
- |
- |
7 |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
- |
73 in |
Ground Pressure |
- |
- |
- |
5.7 psi |
Length of Track on Ground |
- |
- |
- |
91 in |
Number of Shoes - Each Side - Abrasion Undercarriage |
- |
- |
- |
36 |
Shoe Width - Standard |
- |
- |
- |
20 in |
Standards |
ROPS |
- |
Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. |
- |
- |
FOPS |
- |
Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. |
- |
- |
Sound |
- |
The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling |
- |
- |
Sound (1) |
- |
The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c |
- |
- |
Sound (2) |
- |
Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. |
- |
- |
Steering and Brakes |
Steering Type |
- |
Differential |
- |
- |
Brake Type |
- |
Spring Applied Wet Disc |
- |
- |
Brake Diameter |
- |
15.5 in |
- |
- |
Brake Count |
- |
8 |
- |
- |
Engine - U.S. EPA Tier 4 Final/EU Stage V |
Engine Model |
- |
Cat® C18 |
- |
- |
Bore |
- |
5.7 in³ |
- |
- |
Stroke |
- |
7.2 in³ |
- |
- |
Displacement |
- |
1106 in³ |
- |
- |
Engine Power - Gross SAE J1995 |
- |
477 HP |
- |
- |
Engine Power - ISO 14396 |
- |
468 HP |
- |
- |
Engine Power - Net SAE J1349/ISO 9249 |
- |
440 HP |
- |
- |
Emissions |
- |
U.S. EPA Tier 4 / EU Stage V |
- |
- |
Note (1) |
- |
All Engine ratings apply at 1,750 rpm. |
- |
- |
Note (2) |
- |
No derating required up to 2499 m (8,200 ft). |
- |
- |
FLUID CAPACITIES |
Fuel Tank (Splash Fill) |
- |
254 gal (US) |
- |
- |
DEF Tank (Tier 4 only) |
- |
9.5 gal (US) |
- |
- |
Fuel Tank (Fast Fill) |
- |
248 gal (US) |
- |
- |
Cooling System |
- |
21 gal (US) |
- |
- |
Engine Crankcase* |
- |
10 gal (US) |
- |
- |
Powertrain |
- |
40 gal (US) |
- |
- |
Final Drives (each) |
- |
4 gal (US) |
- |
- |
Roller Frames (each) |
- |
12 gal (US) |
- |
- |
Pivot Shaft Oil |
- |
8 gal (US) |
- |
- |
Hydraulic System Tank |
- |
24 gal (US) |
- |
- |
Note |
- |
*With oil filters. |
- |
- |
Note 2 |
- |
Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or |
- |
- |
Note 3 |
- |
All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. |
- |
- |
Note 4 |
- |
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. |
- |
- |
Hydraulic Controls |
Pump Type |
- |
Piston-type geared to flywheel |
- |
- |
Pump Output - Steering |
- |
96 gal/min |
- |
- |
Fan Pump |
- |
21 gal/min |
- |
- |
Tilt Cylinder Flow - Rod End Flow |
- |
53 gal/min |
- |
- |
Tilt Cylinder Flow - Head End Flow |
- |
53 gal/min |
- |
- |
Lift Cylinder Relief Valve Setting |
- |
3800 lbf/in |
- |
- |
Tilt Cylinder Relief Valve Setting |
- |
2799 psi |
- |
- |
Ripper - Lift - Relief Valve Setting |
- |
3800 psi |
- |
- |
Ripper - Pitch - Relief Valve Setting |
- |
3800 psi |
- |
- |
Steering System - Pressure |
- |
5874 psi |
- |
- |
Tank Capacity |
- |
24 gal/min |
- |
- |
Note (1) |
- |
Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). |
- |
- |
Note (2) |
- |
Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). |
- |
- |
Note (3) |
- |
Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) |
- |
- |
Pump Output |
- |
- |
- |
17.2 gal/min |
Relief Valve Settings |
- |
- |
- |
2988 psi |
Blade - Semi-Universal |
Blade Capacity (SAE J1265) |
- |
17.8 yd³ |
- |
- |
Blade Width (over end bits) |
- |
171.3 in |
- |
- |
Blade Height |
- |
76.1 in |
- |
- |
Maximum Digging Depth |
- |
23.9 in |
- |
- |
Ground Clearance at Full Lift |
- |
56 in |
- |
- |
Maximum Tilt |
- |
37 in |
- |
- |
Blade Weight |
- |
10587 lb |
- |
- |
Total Operating Weight* (with blade and single-shank ripper) |
- |
110205 lb |
- |
- |
Note |
- |
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Blade - Universal |
Blade Capacity (SAE J1265) |
- |
21.7 yd³ |
- |
- |
Blade Width (over end bits) |
- |
184.3 in |
- |
- |
Blade Height |
- |
76.1 in |
- |
- |
Maximum Digging Depth |
- |
23.9 in |
- |
- |
Ground Clearance at Full Lift |
- |
56 in |
- |
- |
Maximum Tilt |
- |
39.9 in |
- |
- |
Blade Weight |
- |
12016 lb |
- |
- |
Total Operating Weight* (with blade and single-shank ripper) |
- |
111362 lb |
- |
- |
Note |
- |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Ripper - Single Shank |
Maximum penetration force * (shank vertical) |
- |
35520 lbf |
- |
- |
Maximum penetration depth (standard tip) |
- |
48.5 in |
- |
- |
Pryout Force |
- |
74637 lbf |
- |
- |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
- |
34.7 in |
- |
- |
Number of Pockets |
- |
1 |
- |
- |
Weight |
- |
10701 lb |
- |
- |
Total Operating Weight* (with SU Blade and noted ripper) |
- |
110205 lb |
- |
- |
Note |
- |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes
and the noted blade and ripper type. |
- |
- |
Ripper - Single Shank, Deep Ripping |
Maximum penetration force * (shank vertical) |
- |
38667 lbf |
- |
- |
Maximum penetration depth (standard tip) |
- |
68 in |
- |
- |
Pryout Force |
- |
74412 lbf |
- |
- |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
- |
32.2 in |
- |
- |
Number of Pockets |
- |
1 |
- |
- |
Weight |
- |
10981 lb |
- |
- |
Total Operating Weight* (with SU Blade and noted ripper) |
- |
110485 lb |
- |
- |
Note |
- |
*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Ripper - Multi-Shank, Adjustable Parallelogram |
Maximum Penetration Force - Shank Vertical |
- |
34621 lbf |
- |
- |
Maximum Penetration - Standard Tip |
- |
31.4 in |
- |
- |
Pry-Out Force - Multi-Shank Ripper with One Tooth |
- |
81156 lbf |
- |
- |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole |
- |
34.6 in |
- |
- |
Number of Pockets |
- |
3 |
- |
- |
Weight |
- |
12136 lb |
- |
- |
Total Operating Weight* - With SU-Blade and Ripper |
- |
111739 lb |
- |
- |
Note |
- |
* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. |
- |
- |
Dimensions (Approximate) |
Ground Clearance* |
- |
18.1 in |
- |
- |
Track Gauge |
- |
88.6 in |
- |
- |
Width - Without Trunnions - Standard Shoe |
- |
113 in |
- |
- |
Width - Over Trunnions |
- |
130.3 in |
- |
- |
Height - FOPS Cab* |
- |
150.4 in |
- |
- |
Height - Top of Stack* |
- |
152.6 in |
- |
- |
Height - ROPS/Canopy* |
- |
157.5 in |
- |
- |
Drawbar Height (Center of Clevis)* |
- |
30 in |
- |
- |
Length - Track on Ground |
- |
136.6 in |
- |
- |
Overall Length - Basic Tractor |
- |
193.3 in |
- |
- |
Length - Basic Tractor - With Drawbar |
- |
206.4 in |
- |
- |
Length - Basic Tractor - With Winch |
- |
218.3 in |
- |
- |
Length - With SU-Blade** |
- |
259.9 in |
- |
- |
Length - With U-Blade |
- |
274.3 in |
- |
- |
Length - With Single-Shank Ripper |
- |
257 in |
- |
- |
Length - With Multi-Shank Ripper |
- |
257.4 in |
- |
- |
Overall Length - SU-Blade/SS Ripper |
- |
323.6 in |
- |
- |
Note (1) |
- |
*Includes grouser height for total dimensions on hard surfaces. |
- |
- |
Winches |
Winch Model |
- |
PA 140VS |
- |
- |
Weight* |
- |
3950 lb |
- |
- |
Oil Capacity |
- |
4 gal (US) |
- |
- |
Drum Width |
- |
12.6 in |
- |
- |
Wire Cable Diameter - Recommended |
- |
1.13 in |
- |
- |
Wire Cable Diameter - Optional |
- |
1.25 ft |
- |
- |
Maximum Drum Capacity - Recommended Cable Length |
- |
257 in |
- |
- |
Maximum Drum Capacity - Optional Cable Length |
- |
204 ft |
- |
- |
Wire Cable Ferrule Size - Outside Diameter |
- |
2.4 in |
- |
- |
Wire Cable Ferrule Size - Length |
- |
2.8 in |
- |
- |
Note |
- |
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). |
- |
- |
Note (2) |
- |
Variable speed, hydraulically driven, dual braking system, three-roller fairlead. |
- |
- |
D6 XE Push Arm |
Operating Weight |
- |
- |
49388 lb |
- |
Ground Pressure |
- |
- |
8 psi |
- |
Width of Standard Shoe |
- |
- |
24 in |
- |
Blade |
- |
- |
Semi-Universal (SU) |
- |
Blade Capacity |
- |
- |
7.5 yd³ |
- |
D6 XE LGP (30-in) Push Arm |
Operating Weight |
- |
- |
51020 lb |
- |
Ground Pressure |
- |
- |
6.6 psi |
- |
Width of Standard Shoe |
- |
- |
30 in |
- |
Blade |
- |
- |
Semi-Universal (SU) |
- |
Blade Capacity |
- |
- |
7.6 yd³ |
- |
D6 XE LGP (36-in) Push Arm |
Operating Weight |
- |
- |
53315 lb |
- |
Ground Pressure |
- |
- |
5.3 psi |
- |
Width of Standard Shoe |
- |
- |
36 in |
- |
Blade |
- |
- |
Straight |
- |
Blade Capacity |
- |
- |
5 yd³ |
- |
D6 XE VPAT |
Operating Weight |
- |
- |
49708 lb |
- |
Ground Pressure |
- |
- |
7.2 psi |
- |
Width of Standard Shoe |
- |
- |
24 in |
- |
Blade |
- |
- |
VPAT |
- |
Blade Capacity |
- |
- |
5.4 yd³ |
- |
D6 XE LGP (30-in) VPAT |
Operating Weight |
- |
- |
51333 lb |
- |
Ground Pressure |
- |
- |
5.9 psi |
- |
Width of Standard Shoe |
- |
- |
30 in |
- |
Blade |
- |
- |
VPAT |
- |
Blade Capacity |
- |
- |
5.9 yd³ |
- |
D6 XE LGP (36-in) VPAT |
Operating Weight |
- |
- |
52512 lb |
- |
Ground Pressure |
- |
- |
5.1 psi |
- |
Width of Standard Shoe |
- |
- |
36 in |
- |
Blade |
- |
- |
VPAT |
- |
Blade Capacity |
- |
- |
6.5 yd³ |
- |
Ripper |
Type |
- |
- |
- |
Parallelogram |
Number of Shanks |
- |
- |
- |
3 |
Height |
- |
- |
- |
6.5 in |
Weight |
- |
- |
- |
1222 lb |
Maximum Digging Depth |
- |
- |
- |
13.3 in |
Maximum Reach - Ground Line |
- |
- |
- |
30.2 in |
Overall Width |
- |
- |
- |
67.3 in |
Maximum Ground Clearance Under Tip |
- |
- |
- |
17.6 in |
Dimensions |
BLADE: Blade Width - LGP |
- |
- |
- |
126.7 in |
Track Gauge - LGP, 762 mm (30 in) |
- |
- |
- |
73 in |
BLADE: Digging Depth - LGP |
- |
- |
- |
23.2 in |
Track Gauge - LGP |
- |
- |
- |
67.9 in |
BLADE: Blade Capacity (SAE) - LGP |
- |
- |
- |
3.06 yd³ |
BLADE: Blade Width at Maximum Angle - LGP |
- |
- |
- |
115.8 in |
BLADE: Blade Cutting Edge Angle, Adjustable - LGP |
- |
- |
- |
52° to 58° |
Ground Clearance - LGP, 762 mm (30 in) |
- |
- |
- |
13 in |
BLADE: Blade Height - LGP |
- |
- |
- |
39.8 in |
BLADE: Blade Lift Height - LGP |
- |
- |
- |
30.2 in |
Ground Clearance - LGP |
- |
- |
- |
13 in |
Overall Length - With Blade - LGP, 762 mm (30 in) |
- |
- |
- |
169.6 in |
Overall Length - With Blade - LGP |
- |
- |
- |
169.6 in |
Note |
- |
- |
- |
Abrasion Undercarriage |
BLADE: Maximum Tilt - LGP |
- |
- |
- |
17.7 in |
BLADE: Maximum Angle (either side) - LGP |
- |
- |
- |
25° |
BLADE: Blade Capacity (SAE) - Standard |
- |
- |
- |
2.86 yd³ |
Track Gauge - Standard |
- |
- |
- |
63 in |
BLADE: Digging Depth - Standard |
- |
- |
- |
23.8 in |
BLADE: Blade Lift Height - Standard |
- |
- |
- |
30.2 in |
Ground Clearance - Standard |
- |
- |
- |
13 in |
Overall Length - With Blade - Standard |
- |
- |
- |
170.7 in |
BLADE: Blade Cutting Edge Angle, Adjustable - Standard |
- |
- |
- |
52° to 58° |
BLADE: Blade Height - Standard |
- |
- |
- |
42.2 in |
BLADE: Maximum Tilt - Standard |
- |
- |
- |
15.8 in |
BLADE: Blade Width - Standard |
- |
- |
- |
109.5 in |
BLADE: Blade Width at Maximum Angle - Standard |
- |
- |
- |
103.8 in |
BLADE: Maximum Angle (either side) - Standard |
- |
- |
- |
25° |
Length of Basic Dozer (without blade) - Standard |
- |
- |
- |
128.7 in |
Dozer Height - Standard |
- |
- |
- |
109 in |
Width of Dozer (standard shoes, no blade) - LGP |
- |
- |
- |
92.9 in |
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) |
- |
- |
- |
103.5 in |
Length of Basic Dozer (without blade) - LGP |
- |
- |
- |
128.7 in |
Dozer Height - LGP, 762 mm (30 in) |
- |
- |
- |
109 in |
Width of Dozer (standard shoes, no blade) - Standard |
- |
- |
- |
83 in |
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) |
- |
- |
- |
128.7 in |
Dozer Height - LGP |
- |
- |
- |
109 in |
Cab |
ROPS |
- |
- |
- |
ISO 3471:2008 |
FOPS |
- |
- |
- |
ISO 3449:2005 Level II |
Retrieval Winch |
Maximum Line Pull - Bare Drum |
- |
- |
- |
32150 lb |
Control |
- |
- |
- |
Hydraulic |
Rope Diameter - Optional |
- |
- |
- |
0.75 in |
Drum Capacity - Optional Cable |
- |
- |
- |
195 ft |
Maximum Line Speed - Full Drum |
- |
- |
- |
79 ft/min |
Drum Capacity - Recommended Cable |
- |
- |
- |
277 ft |
Winch Drive |
- |
- |
- |
Hydraulic |
Weight |
- |
- |
- |
1747 lb |
Maximum Line Pull - Full Drum |
- |
- |
- |
20350 lb |
Rope Diameter - Recommended |
- |
- |
- |
0.63 in |
Maximum Line Speed - Bare Drum |
- |
- |
- |
50 ft/min |
Speed |
- |
- |
- |
Variable |
Winch Length |
- |
- |
- |
35.63 in |
Drum Diameter |
- |
- |
- |
8 in |
Overall width |
- |
- |
- |
27.91 in |
Drum Width |
- |
- |
- |
9.65 in |
Throat Clearance |
- |
- |
- |
5.6 in |
High Performance Winch |
Winch length |
- |
- |
- |
27.76 in |
Rope diameter – optional |
- |
- |
- |
0.75 in |
Maximum line speed – bare drum |
- |
- |
- |
131 ft/min |
Maximum line pull – bare drum |
- |
- |
- |
40000 lb |
Weight |
- |
- |
- |
1345 lb |
Drum capacity – optional |
- |
- |
- |
256 ft |
Maximum line speed – full drum |
- |
- |
- |
207 ft/min |
Rope diameter – recommended |
- |
- |
- |
0.63 in |
Winch drive |
- |
- |
- |
Hydrostatic |
Throat clearance |
- |
- |
- |
6.75 in |
Drum diameter |
- |
- |
- |
10 in |
Overall width |
- |
- |
- |
29.2 in |
Drum width |
- |
- |
- |
10.8 in |
Maximum line pull – full drum |
- |
- |
- |
25000 lb |
Speed |
- |
- |
- |
Variable |
Drum capacity – recommended cable |
- |
- |
- |
371 ft |
Control |
- |
- |
- |
Hydraulic |