Compare

Compare Equipment Go Back

Engine
	D1 Dozer View Product	D10 Dozer View Product Remove	D9 Dozer View Product Remove
Engine Model	Cat C3.6	-	-
Power - Net	80 HP	-	-
Displacement	220 in³	-	-
Net Power - 2,200 rpm - SAE J1349	80 HP	-	-
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269	80 HP	-	-
Power Train	Hydrostatic	-	-
Note (1)	Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.	-	-
Note (2)	All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.	-	-
Weights
Operating Weight	17855 lb	154888 lb	110225 lb
Operating Weight - LGP	18839 lb	-	-
Note (1)	Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.	D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Operating Weight - LGP, 762 mm/30 in	19295 lb	-	-
Note (2)	For machine with ripper, add 554 kg (1,222 lb).	D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Shipping Weight	-	111739 lb	84373 lb
Transmission
Drive Pumps	1	-	-
Maximum Travel Speed - Reverse	6.2 mile/h	-	-
Relief Valve Settings	7033 psi	-	-
Maximum Travel Speed - Forward	5.6 mile/h	-	-
Track Motors	2	-	-
1.0 Forward	-	2.5 mile/h	2.2 mile/h
1.5 Forward	-	3.4 mile/h	-
2.0 Forward	-	4.5 mile/h	3.9 mile/h
2.5 Forward	-	6 mile/h	-
3.0 Forward	-	7.8 mile/h	6.8 mile/h
1.0 Reverse	-	3.2 mile/h	2.7 mile/h
1.5 Reverse	-	4.2 mile/h	-
2.0 Reverse	-	5.6 mile/h	4.8 mile/h
2.5 Reverse	-	7.5 mile/h	-
3.0 Reverse	-	9.8 mile/h	8.4 mile/h
Transmission Clutch Diameter	-	17 in	-
Type	-	Planetary powershift	Planetary powershift
Hydraulic Controls
Pump Output	17.2 gal/min	-	-
Relief Valve Settings	2988 psi	-	-
Pump Type	-	Variable displacement piston	Piston-type geared to flywheel
Pump Output - Implement	-	112 gal/min	-
Note (1)	-	Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Fan Pump	-	21.7 gal/min	21 gal/min
Note (2)	-	Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Tilt Cylinder Flow - Rod End Flow	-	112 gal/min	53 gal/min
Tilt Cylinder Flow - Head End Flow	-	63.4 gal/min	53 gal/min
Lift Cylinder Relief Valve Setting	-	4061.1 psi	3800 lbf/in
Tilt Cylinder Relief Valve Setting	-	3872.5 psi	2799 psi
Ripper - Lift - Relief Valve Setting	-	4061.1 psi	3800 psi
Ripper - Pitch - Relief Valve Setting	-	4061.1 psi	3800 psi
Tank Capacity	-	32.2 gal (US)	24 gal/min
Cylinder Sizing - Blade Lift - Bore	-	5.5 in	-
Cylinder Sizing - Blade Tilt - Bore	-	8.3 in	-
Cylinder Sizing - Ripper Shank Lift - Bore	-	8.3 in	-
Cylinder Sizing - Ripper Shank Angle - Bore	-	7.1 in	-
Cylinder Sizing - Blade Lift - Stroke	-	65.1 in	-
Cylinder Sizing - Blade Tilt - Stroke	-	9.5 in	-
Cylinder Sizing - Ripper Shank Lift - Stroke	-	21.1 in	-
Cylinder Sizing - Ripper Shank Angle - Stroke	-	26 in	-
Note (3)	-	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Pump Output - Steering	-	-	96 gal/min
Steering System - Pressure	-	-	5874 psi
Ripper
Type	Parallelogram	-	-
Number of Shanks	3	-	-
Height	6.5 in	-	-
Weight	1222 lb	-	-
Maximum Ground Clearance Under Tip	17.6 in	-	-
Maximum Digging Depth	13.3 in	-	-
Overall Width	67.3 in	-	-
Maximum Reach - Ground Line	30.2 in	-	-
Cab
FOPS	ISO 3449:2005 Level II	-	-
ROPS	ISO 3471:2008	-	-
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)	89 in	-	-
Length - Track on Ground - LGP	89 in	-	-
Track Gauge - LGP	68 in	-	-
Shoe Width - LGP, 762 mm (30 in)	30 in	-	-
Track Gauge - LGP, 762 mm (30 in)	73 in	-	-
Shoe Width - LGP	25 in	-	-
Track Gauge	59 in	100.4 in	88.6 in
Shoe Width - Standard	16 in	-	-
Ground Pressure - LGP	4.3 psi	-	-
Ground Pressure - LGP, 762 mm (30 in)	3.7 psi	-	-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage	43	-	-
Number of Rollers - Each Side	6	-	-
Length of Track on Ground	89 in	-	-
Number of Shoes - Each Side - Abrasion Undercarriage	38	-	-
Ground Pressure	6.45 psi	-	-
Shoe Type	-	Extreme Service (ES)	Extreme Service
Width - Shoe	-	24 in	24 in
Shoes/Side	-	44	43
Grouser Height	-	3.7 in	3.3 in
Pitch	-	10.2 in	9.4 in
Ground Clearance	-	28.5 in	18.1 in
Length - Track on Ground	-	152.8 in	136.6 in
Ground Contact Area	-	7347 in²	45.6 ft²
Track Rollers/Side	-	8	8
Number of Carrier Rollers	-	1 per side (optional)	1 per side (optional)
Service Refill Capacities
Final Drive - Each - LGP	2.6 gal (US)	-	-
Cooling System	4.2 gal (US)	-	-
Diesel Exhaust Fluid (DEF) Tank	4.9 gal (US)	-	-
Transmission - Hydraulic Tank	23.8 gal (US)	-	-
Crankcase - With Filter	2.8 gal (US)	-	-
Fuel Tank	51.5 gal (US)	-	-
Final Drives - Each Side	2.6 gal (US)	-	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
Dimensions
BLADE: Blade Capacity (SAE) - LGP	2.17 yd³	-	-
BLADE: Blade Lift Height - LGP	28.7 in	-	-
BLADE: Maximum Tilt - LGP	17.2 in	-	-
BLADE: Blade Width - LGP	124 in	-	-
Ground Clearance - LGP	13 in	-	-
BLADE: Blade Width at Maximum Angle - LGP	113.1 in	-	-
BLADE: Digging Depth - LGP	23 in	-	-
Track Gauge - LGP	67.9 in	-	-
Ground Clearance - LGP, 762 mm (30 in)	13 in	-	-
BLADE: Blade Height - LGP	33.8 in	-	-
Overall Length - With Blade - LGP, 762 mm (30 in)	167.8 in	-	-
Track Gauge - LGP, 762 mm (30 in)	73 in	-	-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP	52° to 58°	-	-
Note	*Abrasion Undercarriage	-	-
BLADE: Maximum Angle (either side) - LGP	25°	-	-
Overall Length - With Blade - LGP	167.8 in	-	-
BLADE: Blade Width at Maximum Angle - Standard	95.2 in	-	-
BLADE: Digging Depth - Standard	23.2 in	-	-
BLADE: Blade Width - Standard	104.2 in	-	-
BLADE: Blade Lift Height - Standard	28.7 in	-	-
Ground Clearance - Standard	13 in	-	-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard	52° to 58°	-	-
BLADE: Maximum Angle (either side) - Standard	25°	-	-
BLADE: Maximum Tilt - Standard	14.5 in	-	-
BLADE: Blade Capacity (SAE) - Standard	1.99 yd³	-	-
Track Gauge - Standard	58.9 in	-	-
BLADE: Blade Height - Standard	35.8 in	-	-
Overall Length - With Blade - Standard	168 in	-	-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)	129.6 in	-	-
Width of Dozer (standard shoes, no blade) - Standard	74.8 in	-	-
Length of Basic Dozer (without blade) - Standard	129.6 in	-	-
Length of Basic Dozer (without blade) - LGP	129.6 in	-	-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)	94.9 in	-	-
Dozer Height - LGP	108.9 in	-	-
Width of Dozer (standard shoes, no blade) - LGP	92.9 in	-	-
Dozer Height - LGP, 762 mm (30 in)	108.9 in	-	-
Dozer Height - Standard	108.9 in	-	-
High Performance Winch
Weight	1345 lb	-	-
Drum diameter	10 in	-	-
Winch drive	Hydrostatic	-	-
Winch length	27.76 in	-	-
Maximum line pull – bare drum	40000 lb	-	-
Maximum line speed – full drum	207 ft/min	-	-
Drum width	10.8 in	-	-
Drum capacity – optional	256 ft	-	-
Rope diameter – recommended	0.63 in	-	-
Maximum line pull – full drum	25000 lb	-	-
Rope diameter – optional	0.75 in	-	-
Speed	Variable	-	-
Maximum line speed – bare drum	131 ft/min	-	-
Throat clearance	6.75 in	-	-
Drum capacity – recommended cable	371 ft	-	-
Overall width	29.2 in	-	-
Control	Hydraulic	-	-
Retrieval Winch
Drum Diameter	8 in	-	-
Drum Width	9.65 in	-	-
Throat Clearance	5.6 in	-	-
Winch Length	35.63 in	-	-
Overall width	27.91 in	-	-
Weight	1747 lb	-	-
Maximum Line Pull - Full Drum	79 ft/min	-	-
Drum Capacity - Recommended Cable	277 ft	-	-
Maximum Line Pull - Bare Drum	50 ft/min	-	-
Drum Capacity - Optional Cable	195 ft	-	-
Maximum Line Speed - Full Drum	20350 lb	-	-
Control	Hydraulic	-	-
Maximum Line Speed - Bare Drum	32150 lb	-	-
Rope Diameter - Optional	0.75 in	-	-
Winch Drive	Hydraulic	-	-
Rope Diameter - Recommended	0.63 in	-	-
Speed	Variable	-	-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model	-	Cat® C27	Cat® C18
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	602 HP	-
Engine Power - Gross SAE J1995* - Forward	-	631 HP	-
Engine Power - Gross SAE J1995* - Reverse	-	766 HP	-
Engine Power - ISO 14396* - Forward	-	620 HP	-
Engine Power - ISO 14396* - Reverse	-	754 HP	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	722 HP	-
Displacement	-	1648 in³	1106 in³
Stroke	-	6 in	7.2 in³
Bore	-	5.4 in	5.7 in³
Emissions	-	U.S. EPA Tier 4 Final/EU Stage V	U.S. EPA Tier 4 / EU Stage V
Note (1)	-	*Excludes all fan losses.	All Engine ratings apply at 1,750 rpm.
Note (2)	-	All Engine ratings apply at 1,800 rpm.	No derating required up to 2499 m (8,200 ft).
Note (3)	-	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-
Note (4)	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-
Note (5)	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-
Engine Power - Gross SAE J1995	-	-	477 HP
Engine Power - ISO 14396	-	-	468 HP
Engine Power - Net SAE J1349/ISO 9249	-	-	440 HP
Standards
ROPS	-	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS	-	Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound	-	Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Note	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and	-
Sound (1)	-	Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Note (1)	-	The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.	-
Note (2)	-	The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.	-
Note (3)	-	The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).	-
Sound (2)	-	-	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Steering and Brakes
Steering Type	-	Hydraulically Applied Multiple-Disc Steering Clutch	Differential
Brake Type	-	Spring Applied Multiple- Disc Brake	Spring Applied Wet Disc
Brake Diameter	-	15.4 in	15.5 in
Brake Count	-	10	8
Blades
10SU ABR - Capacity (SAE J1265)	-	24.2 yd³	-
10SU ABR - Width (over end bits)	-	194.5 in	-
10SU ABR - Height	-	83.5 in	-
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	19.98 in	-
10SU ABR - Digging Depth - Blade Pitch: Nominal	-	25.23 in	-
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	30.08 in³	-
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	66.14 in	-
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	53.86 in	-
10SU ABR - Ground Clearance - Maximum Tilt LH	-	56.3 in	-
10SU ABR - Ground Clearance - Maximum Tilt RH	-	56.3 in	-
10U ABR - Capacity (SAE J1265)	-	28.7 yd³	-
10U ABR - Width (over end bits)	-	207.1 in	-
10U ABR - Height	-	83.5 in	-
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)	-	19.98 in	-
10U ABR - Digging Depth - Blade Pitch: Nominal	-	60 in	-
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)	-	30.1 in	-
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)	-	66.1 in	-
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)	-	53.9 in	-
10U ABR - Ground Clearance - Maximum Tilt LH	-	60.8 in	-
10U ABR - Ground Clearance - Maximum Tilt RH	-	60.8 in	-
10U ABR - Weights - Blade Weight*	-	23585 lb	-
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)	-	154888 lb	-
Note (1)	-	Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees	-
Note (2)	-	*Does not include hydraulic controls but includes blade cylinders, pusharms.	-
Note (3)	-	**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.	-
Ripper - Single Shank
Maximum penetration force * (shank vertical)	-	49233 lbf	35520 lbf
Maximum penetration depth (standard tip)	-	59.2 in	48.5 in
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	36 in	34.7 in
Weight	-	14209 lb	10701 lb
Note	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Pryout Force	-	-	74637 lbf
Number of Pockets	-	-	1
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110205 lb
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	-	53055 lbf	38667 lbf
Maximum penetration depth (standard tip)	-	78.3 in	68 in
Weight	-	14548 lb	10981 lb
Note	-	Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Pryout Force	-	-	74412 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	32.2 in
Number of Pockets	-	-	1
Total Operating Weight* (with SU Blade and noted ripper)	-	-	110485 lb
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	-	Cat® C27	-
Engine Power - Net SAE J1349/ISO 9249** - Forward	-	603 HP	-
Engine Power - Net SAE J1349/ISO 9249** - Reverse	-	722 HP	-
Engine Power - Gross SAE J1995* - Forward	-	631 HP	-
Engine Power - Gross SAE J1995* - Reverse	-	766 HP	-
Engine Power - ISO 14396* - Forward	-	622 HP	-
Engine Power - ISO 14396* - Reverse	-	756 HP	-
Displacement	-	1648 in³	-
Bore	-	5.4 in	-
Stroke	-	6 in	-
Emissions	-	U.S. EPA Tier 2 Equivalent	-
Note (1)	-	*Excludes all fan losses.	-
Note (2)	-	All Engine ratings apply at 1,800 rpm.	-
Note (3)	-	Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).	-
Note (4)	-	Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).	-
Note (5)	-	**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.	-
Fuel Tank Capacities
Fuel Tank - Usable Volume	-	323.3 gal (US)	-
Fuel Tank - Total Volume	-	335.2 gal (US)	-
Dimensions (Approximate)
Ground Clearance*	-	28.5 in	18.1 in
Track Gauge	-	100.4 in	88.6 in
Width - Without Trunnions - 610 mm/24 in ES	-	130.4 in	-
Width - Over Trunnions	-	148 in	130.3 in
Height - FOPS Cab*	-	162.8 in	150.4 in
Height - Top of Stack*	-	171.5 in	152.6 in
Height - ROPS/Canopy*	-	173.5 in	157.5 in
Note (1)	-	*Includes grouser height for total dimensions on hard surfaces.	*Includes grouser height for total dimensions on hard surfaces.
Length - Track on Ground	-	152.8 in	136.6 in
Overall Length - Basic Tractor	-	209.6 in	193.3 in
Length - With SU-Blade	-	292 in	-
Length - With U-Blade	-	305.1 in	274.3 in
Length - With Single-Shank Ripper	-	278.8 in	257 in
Length - With Multi-Shank Ripper	-	285.1 in	257.4 in
Overall Length - SU-Blade/SS Ripper	-	360.6 in	323.6 in
Width - Without Trunnions - Standard Shoe	-	-	113 in
Drawbar Height (Center of Clevis)*	-	-	30 in
Length - Basic Tractor - With Drawbar	-	-	206.4 in
Length - Basic Tractor - With Winch	-	-	218.3 in
Length - With SU-Blade**	-	-	259.9 in
FLUID CAPACITIES
Cooling System Refill – Tier 4 Final Engine	-	46.2 gal (US)	-
Engine Crankcase Sump	-	27.2 gal (US)	-
Power Train - Total Volume	-	81.4 gal (US)	-
Power Train - Refill Volume	-	74.8 gal (US)	-
Final Drives (each)	-	12.2 gal (US)	4 gal (US)
Track Roller Frames (each)	-	16.9 gal (US)	-
Pivot Shaft Oil	-	9.5 gal (US)	8 gal (US)
Hydraulic System Tank	-	32.2 gal (US)	24 gal (US)
Fuel Tank (Splash Fill)	-	-	254 gal (US)
DEF Tank (Tier 4 only)	-	-	9.5 gal (US)
Fuel Tank (Fast Fill)	-	-	248 gal (US)
Cooling System	-	-	21 gal (US)
Engine Crankcase*	-	-	10 gal (US)
Powertrain	-	-	40 gal (US)
Roller Frames (each)	-	-	12 gal (US)
Note	-	-	*With oil filters.
Note 2	-	-	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3	-	-	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4	-	-	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model	-	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249	-	-	452 HP
Bore	-	-	5.7 in³
Stroke	-	-	7.2 in
Displacement	-	-	1106 in³
Engine Power - Gross SAE J1995	-	-	487 HP
Engine Power - ISO 14396	-	-	479 HP
Emissions	-	-	U.S. EPA Tier 2 or Tier 3 equivalent
Note (1)	-	-	All engine ratings apply at 1,750 rpm.
Note (2)	-	-	No derating required up to 4267 m (14,000 ft) altitude.
Blade - Semi-Universal
Blade Capacity (SAE J1265)	-	-	17.8 yd³
Blade Width (over end bits)	-	-	171.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	37 in
Blade Weight	-	-	10587 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	110205 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade - Universal
Blade Capacity (SAE J1265)	-	-	21.7 yd³
Blade Width (over end bits)	-	-	184.3 in
Blade Height	-	-	76.1 in
Maximum Digging Depth	-	-	23.9 in
Ground Clearance at Full Lift	-	-	56 in
Maximum Tilt	-	-	39.9 in
Blade Weight	-	-	12016 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	111362 lb
Note	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Multi-Shank, Adjustable Parallelogram
Maximum Penetration Force - Shank Vertical	-	-	34621 lbf
Maximum Penetration - Standard Tip	-	-	31.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth	-	-	81156 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	34.6 in
Number of Pockets	-	-	3
Weight	-	-	12136 lb
Total Operating Weight* - With SU-Blade and Ripper	-	-	111739 lb
Note	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Winches
Winch Model	-	-	PA 140VS
Weight*	-	-	3950 lb
Oil Capacity	-	-	4 gal (US)
Drum Width	-	-	12.6 in
Wire Cable Diameter - Recommended	-	-	1.13 in
Wire Cable Diameter - Optional	-	-	1.25 ft
Maximum Drum Capacity - Recommended Cable Length	-	-	257 in
Maximum Drum Capacity - Optional Cable Length	-	-	204 ft
Wire Cable Ferrule Size - Outside Diameter	-	-	2.4 in
Wire Cable Ferrule Size - Length	-	-	2.8 in
Note	-	-	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)	-	-	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.

Compare Equipment Go Back

D1 Dozer

D10 Dozer

D9 Dozer

Engine

Weights

Transmission

Hydraulic Controls

Ripper

Cab

Undercarriage

Service Refill Capacities

Air Conditioning System

Dimensions

High Performance Winch

Retrieval Winch

Engine - U.S. EPA Tier 4 Final/EU Stage V

Standards

Steering and Brakes

Blades

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Dimensions (Approximate)

FLUID CAPACITIES

Engine - U.S. EPA Tier 2/3 Equivalent

Blade - Semi-Universal

Blade - Universal

Ripper - Multi-Shank, Adjustable Parallelogram

Winches

Earthmoving

Parts & Service

Power Systems

Technology

Contact Us