CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D1 Dozer
    View Product
    D6 XE Dozer
    View Product Remove
    D9 Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C3.6 Cat C9.3B - -
    Power - Net 80 HP 215 HP - -
    Displacement 220 in³ - - -
    Net Power - 2,200 rpm - SAE J1349 80 HP - - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP - - -
    Power Train Hydrostatic - - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. Rated horsepower at 1,700 rpm. Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator. Advertised power is tested per the specified standard in effect a - -
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) ** or 100% renewable diesel, HVO ( - -
    Net Power - Rated - ISO 9249/SAE J1349 - 215 HP - -
    Net Power (Rated) - ISO 9249 (DIN) - 219 mhp - -
    Emissions - U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V - -
    Note (3) - Basic machine specs provided below. For complete specifications and dimensions by configuration, blade and track shoe offerings and more, please visit the product download section to view the full Technical Specifications document. - -
    Note (4) - Machine Build Number 20B - -

    Weights
    Operating Weight 17855 lb 51333 lb 110225 lb -
    Operating Weight - LGP 18839 lb - - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. - D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator. -
    Operating Weight - LGP, 762 mm/30 in 19295 lb - - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). - D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS. -
    Shipping Weight - - 84373 lb -

    Transmission
    Drive Pumps 1 - - -
    Maximum Travel Speed - Reverse 6.2 mile/h - - -
    Relief Valve Settings 7033 psi - - -
    Maximum Travel Speed - Forward 5.6 mile/h - - -
    Track Motors 2 - - -
    Power Train - Electric Drive - -
    1.0 Forward - - 2.2 mile/h -
    2.0 Forward - - 3.9 mile/h -
    3.0 Forward - - 6.8 mile/h -
    1.0 Reverse - - 2.7 mile/h -
    2.0 Reverse - - 4.8 mile/h -
    3.0 Reverse - - 8.4 mile/h -
    Type - - Planetary powershift -
    Transmission Type - - - Cat Planetary Power Shift
    Forward - 1 - - - 3.7 mile/h
    Forward - 2 - - - 6.5 mile/h
    Forward - 3 - - - 11.2 mile/h
    Forward - 4 - - - 19.4 mile/h
    Reverse - 1 - - - 4.2 mile/h
    Reverse - 2 - - - 7.3 mile/h
    Reverse - 3 - - - 12.8 mile/h
    Reverse - 4 - - - 22.1 mile/h

    Hydraulic Controls
    Pump Output 17.2 gal/min - - -
    Relief Valve Settings 2988 psi - - -
    Pump Type - - Piston-type geared to flywheel -
    Pump Output - Steering - - 96 gal/min -
    Fan Pump - - 21 gal/min -
    Tilt Cylinder Flow - Rod End Flow - - 53 gal/min -
    Tilt Cylinder Flow - Head End Flow - - 53 gal/min -
    Lift Cylinder Relief Valve Setting - - 3800 lbf/in -
    Tilt Cylinder Relief Valve Setting - - 2799 psi -
    Ripper - Lift - Relief Valve Setting - - 3800 psi -
    Ripper - Pitch - Relief Valve Setting - - 3800 psi -
    Steering System - Pressure - - 5874 psi -
    Tank Capacity - - 24 gal/min -
    Note (1) - - Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi). -
    Note (2) - - Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi). -
    Note (3) - - Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi) -

    Ripper
    Type Parallelogram - - -
    Number of Shanks 3 - - -
    Height 6.5 in - - -
    Weight 1222 lb - - -
    Maximum Ground Clearance Under Tip 17.6 in - - -
    Maximum Digging Depth 13.3 in - - -
    Overall Width 67.3 in - - -
    Maximum Reach - Ground Line 30.2 in - - -

    Cab
    FOPS ISO 3449:2005 Level II - - -
    ROPS ISO 3471:2008 - - -

    Undercarriage
    Length - Track on Ground - LGP, 762 mm (30 in) 89 in - - -
    Length - Track on Ground - LGP 89 in - - -
    Track Gauge - LGP 68 in - - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    Shoe Width - LGP 25 in - - -
    Track Gauge 59 in - 88.6 in -
    Shoe Width - Standard 16 in - - -
    Ground Pressure - LGP 4.3 psi - - -
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi - - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 - - -
    Number of Rollers - Each Side 6 - - -
    Length of Track on Ground 89 in - - -
    Number of Shoes - Each Side - Abrasion Undercarriage 38 - - -
    Ground Pressure 6.45 psi - - -
    Shoe Type - - Extreme Service -
    Width - Shoe - - 24 in -
    Shoes/Side - - 43 -
    Grouser Height - - 3.3 in -
    Pitch - - 9.4 in -
    Ground Clearance - - 18.1 in -
    Length - Track on Ground - - 136.6 in -
    Ground Contact Area - - 45.6 ft² -
    Track Rollers/Side - - 8 -
    Number of Carrier Rollers - - 1 per side (optional) -

    Service Refill Capacities
    Final Drive - Each - LGP 2.6 gal (US) - - -
    Cooling System 4.2 gal (US) - - -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - - -
    Transmission - Hydraulic Tank 23.8 gal (US) - - -
    Crankcase - With Filter 2.8 gal (US) - - -
    Fuel Tank 51.5 gal (US) 90 gal (US) - 132.1 gal (US)
    Final Drives - Each Side 2.6 gal (US) - - -
    DEF Tank - 7.4 gal (US) - -
    Diesel Exhaust Fluid Tank - - - 4.2 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V - - - 21.4 gal (US)
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - - - 19.3 gal (US)
    Engine Crankcase - - - 5.3 gal (US)
    Transmission - - - 13.2 gal (US)
    Differential - Final Drives - Front - - - 17.2 gal (US)
    Differential - Final Drives - Rear - - - 17.2 gal (US)
    Hydraulic System - Implement/Steering - - - 34.1 gal (US)
    Hydraulic Tank Only - - - 19.8 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.36 kg of refrigerant which has a CO2 equivalent of 1.946 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes. -

    Dimensions
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ - - -
    BLADE: Blade Lift Height - LGP 28.7 in - - -
    BLADE: Maximum Tilt - LGP 17.2 in - - -
    BLADE: Blade Width - LGP 124 in - - -
    Ground Clearance - LGP 13 in - - -
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in - - -
    BLADE: Digging Depth - LGP 23 in - - -
    Track Gauge - LGP 67.9 in - - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - - -
    BLADE: Blade Height - LGP 33.8 in - - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - - -
    Note *Abrasion Undercarriage - - -
    BLADE: Maximum Angle (either side) - LGP 25° - - -
    Overall Length - With Blade - LGP 167.8 in - - -
    BLADE: Blade Width at Maximum Angle - Standard 95.2 in - - -
    BLADE: Digging Depth - Standard 23.2 in - - -
    BLADE: Blade Width - Standard 104.2 in - - -
    BLADE: Blade Lift Height - Standard 28.7 in - - -
    Ground Clearance - Standard 13 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - - -
    BLADE: Maximum Angle (either side) - Standard 25° - - -
    BLADE: Maximum Tilt - Standard 14.5 in - - -
    BLADE: Blade Capacity (SAE) - Standard 1.99 yd³ - - -
    Track Gauge - Standard 58.9 in - - -
    BLADE: Blade Height - Standard 35.8 in - - -
    Overall Length - With Blade - Standard 168 in - - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 129.6 in - - -
    Width of Dozer (standard shoes, no blade) - Standard 74.8 in - - -
    Length of Basic Dozer (without blade) - Standard 129.6 in - - -
    Length of Basic Dozer (without blade) - LGP 129.6 in - - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 94.9 in - - -
    Dozer Height - LGP 108.9 in - - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - - -
    Dozer Height - LGP, 762 mm (30 in) 108.9 in - - -
    Dozer Height - Standard 108.9 in - - -

    High Performance Winch
    Weight 1345 lb - - -
    Drum diameter 10 in - - -
    Winch drive Hydrostatic - - -
    Winch length 27.76 in - - -
    Maximum line pull – bare drum 40000 lb - - -
    Maximum line speed – full drum 207 ft/min - - -
    Drum width 10.8 in - - -
    Drum capacity – optional 256 ft - - -
    Rope diameter – recommended 0.63 in - - -
    Maximum line pull – full drum 25000 lb - - -
    Rope diameter – optional 0.75 in - - -
    Speed Variable - - -
    Maximum line speed – bare drum 131 ft/min - - -
    Throat clearance 6.75 in - - -
    Drum capacity – recommended cable 371 ft - - -
    Overall width 29.2 in - - -
    Control Hydraulic - - -

    Retrieval Winch
    Drum Diameter 8 in - - -
    Drum Width 9.65 in - - -
    Throat Clearance 5.6 in - - -
    Winch Length 35.63 in - - -
    Overall width 27.91 in - - -
    Weight 1747 lb - - -
    Maximum Line Pull - Full Drum 79 ft/min - - -
    Drum Capacity - Recommended Cable 277 ft - - -
    Maximum Line Pull - Bare Drum 50 ft/min - - -
    Drum Capacity - Optional Cable 195 ft - - -
    Maximum Line Speed - Full Drum 20350 lb - - -
    Control Hydraulic - - -
    Maximum Line Speed - Bare Drum 32150 lb - - -
    Rope Diameter - Optional 0.75 in - - -
    Winch Drive Hydraulic - - -
    Rope Diameter - Recommended 0.63 in - - -
    Speed Variable - - -

    D6 XE Push Arm
    Operating Weight - 49388 lb - -
    Ground Pressure - 8 psi - -
    Width of Standard Shoe - 24 in - -
    Blade - Semi-Universal (SU) - -
    Blade Capacity - 7.5 yd³ - -

    D6 XE LGP (30-in) Push Arm
    Operating Weight - 51020 lb - -
    Ground Pressure - 6.6 psi - -
    Width of Standard Shoe - 30 in - -
    Blade - Semi-Universal (SU) - -
    Blade Capacity - 7.6 yd³ - -

    D6 XE LGP (36-in) Push Arm
    Operating Weight - 53315 lb - -
    Ground Pressure - 5.3 psi - -
    Width of Standard Shoe - 36 in - -
    Blade - Straight - -
    Blade Capacity - 5 yd³ - -

    D6 XE VPAT
    Operating Weight - 49708 lb - -
    Ground Pressure - 7.2 psi - -
    Width of Standard Shoe - 24 in - -
    Blade - VPAT - -
    Blade Capacity - 5.4 yd³ - -

    D6 XE LGP (30-in) VPAT
    Operating Weight - 51333 lb - -
    Ground Pressure - 5.9 psi - -
    Width of Standard Shoe - 30 in - -
    Blade - VPAT - -
    Blade Capacity - 5.9 yd³ - -

    D6 XE LGP (36-in) VPAT
    Operating Weight - 52512 lb - -
    Ground Pressure - 5.1 psi - -
    Width of Standard Shoe - 36 in - -
    Blade - VPAT - -
    Blade Capacity - 6.5 yd³ - -

    Sustainability
    Recyclability - 98% - -

    Engine - U.S. EPA Tier 2/3 Equivalent
    Engine Model - - Cat® C18 -
    Engine Power - Net SAE J1349/ISO 9249 - - 452 HP -
    Bore - - 5.7 in³ -
    Stroke - - 7.2 in -
    Displacement - - 1106 in³ -
    Engine Power - Gross SAE J1995 - - 487 HP -
    Engine Power - ISO 14396 - - 479 HP -
    Emissions - - U.S. EPA Tier 2 or Tier 3 equivalent -
    Note (1) - - All engine ratings apply at 1,750 rpm. -
    Note (2) - - No derating required up to 4267 m (14,000 ft) altitude. -

    Standards
    ROPS - - Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008. -
    FOPS - - Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II. -
    Sound - - The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling -
    Sound (1) - - The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c -
    Sound (2) - - Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained. -

    Steering and Brakes
    Steering Type - - Differential -
    Brake Type - - Spring Applied Wet Disc -
    Brake Diameter - - 15.5 in -
    Brake Count - - 8 -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - - Cat® C18 -
    Bore - - 5.7 in³ -
    Stroke - - 7.2 in³ -
    Displacement - - 1106 in³ -
    Engine Power - Gross SAE J1995 - - 477 HP -
    Engine Power - ISO 14396 - - 468 HP -
    Engine Power - Net SAE J1349/ISO 9249 - - 440 HP -
    Emissions - - U.S. EPA Tier 4 / EU Stage V -
    Note (1) - - All Engine ratings apply at 1,750 rpm. -
    Note (2) - - No derating required up to 2499 m (8,200 ft). -

    FLUID CAPACITIES
    Fuel Tank (Splash Fill) - - 254 gal (US) -
    DEF Tank (Tier 4 only) - - 9.5 gal (US) -
    Fuel Tank (Fast Fill) - - 248 gal (US) -
    Cooling System - - 21 gal (US) -
    Engine Crankcase* - - 10 gal (US) -
    Powertrain - - 40 gal (US) -
    Final Drives (each) - - 4 gal (US) -
    Roller Frames (each) - - 12 gal (US) -
    Pivot Shaft Oil - - 8 gal (US) -
    Hydraulic System Tank - - 24 gal (US) -
    Note - - *With oil filters. -
    Note 2 - - Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or -
    Note 3 - - All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. -
    Note 4 - - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. -

    Blade - Semi-Universal
    Blade Capacity (SAE J1265) - - 17.8 yd³ -
    Blade Width (over end bits) - - 171.3 in -
    Blade Height - - 76.1 in -
    Maximum Digging Depth - - 23.9 in -
    Ground Clearance at Full Lift - - 56 in -
    Maximum Tilt - - 37 in -
    Blade Weight - - 10587 lb -
    Total Operating Weight* (with blade and single-shank ripper) - - 110205 lb -
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Blade - Universal
    Blade Capacity (SAE J1265) - - 21.7 yd³ -
    Blade Width (over end bits) - - 184.3 in -
    Blade Height - - 76.1 in -
    Maximum Digging Depth - - 23.9 in -
    Ground Clearance at Full Lift - - 56 in -
    Maximum Tilt - - 39.9 in -
    Blade Weight - - 12016 lb -
    Total Operating Weight* (with blade and single-shank ripper) - - 111362 lb -
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - - 35520 lbf -
    Maximum penetration depth (standard tip) - - 48.5 in -
    Pryout Force - - 74637 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.7 in -
    Number of Pockets - - 1 -
    Weight - - 10701 lb -
    Total Operating Weight* (with SU Blade and noted ripper) - - 110205 lb -
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - - 38667 lbf -
    Maximum penetration depth (standard tip) - - 68 in -
    Pryout Force - - 74412 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 32.2 in -
    Number of Pockets - - 1 -
    Weight - - 10981 lb -
    Total Operating Weight* (with SU Blade and noted ripper) - - 110485 lb -
    Note - - *Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Maximum Penetration Force - Shank Vertical - - 34621 lbf -
    Maximum Penetration - Standard Tip - - 31.4 in -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - - 81156 lbf -
    Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole - - 34.6 in -
    Number of Pockets - - 3 -
    Weight - - 12136 lb -
    Total Operating Weight* - With SU-Blade and Ripper - - 111739 lb -
    Note - - * Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type. -

    Dimensions (Approximate)
    Ground Clearance* - - 18.1 in -
    Track Gauge - - 88.6 in -
    Width - Without Trunnions - Standard Shoe - - 113 in -
    Width - Over Trunnions - - 130.3 in -
    Height - FOPS Cab* - - 150.4 in -
    Height - Top of Stack* - - 152.6 in -
    Height - ROPS/Canopy* - - 157.5 in -
    Drawbar Height (Center of Clevis)* - - 30 in -
    Length - Track on Ground - - 136.6 in -
    Overall Length - Basic Tractor - - 193.3 in -
    Length - Basic Tractor - With Drawbar - - 206.4 in -
    Length - Basic Tractor - With Winch - - 218.3 in -
    Length - With SU-Blade** - - 259.9 in -
    Length - With U-Blade - - 274.3 in -
    Length - With Single-Shank Ripper - - 257 in -
    Length - With Multi-Shank Ripper - - 257.4 in -
    Overall Length - SU-Blade/SS Ripper - - 323.6 in -
    Note (1) - - *Includes grouser height for total dimensions on hard surfaces. -
    Height to Top of Beacon - - - 13.1 ft
    Height - Top of Cab - - - 12.1 ft
    Height - Top of Exhaust Pipe - - - 11.3 ft
    Height - Top of Hood - - - 8.7 ft
    Height to Top of Radiator Guard - - - 8 ft
    Ground Clearance to Hitch - - - 1.4 ft
    Ground Clearance to Transmission Guard - - - 1.4 ft
    Ground Clearance to Bottom of Bumper - - - 2.3 ft
    Centerline of Rear Axle to Bumper - - - 6.5 ft
    Centerline of Front Axle to Hitch - - - 5.5 ft
    Wheel Base - - - 11 ft
    Width over Platform - - - 10.3 ft
    Overall Length to Front Tire - - - 21 ft
    Overall Machine Length with Straight Blade - - - 23.6 ft
    Overall Machine Length with Coal Blade - - - 25.5 ft

    Winches
    Winch Model - - PA 140VS -
    Weight* - - 3950 lb -
    Oil Capacity - - 4 gal (US) -
    Drum Width - - 12.6 in -
    Wire Cable Diameter - Recommended - - 1.13 in -
    Wire Cable Diameter - Optional - - 1.25 ft -
    Maximum Drum Capacity - Recommended Cable Length - - 257 in -
    Maximum Drum Capacity - Optional Cable Length - - 204 ft -
    Wire Cable Ferrule Size - Outside Diameter - - 2.4 in -
    Wire Cable Ferrule Size - Length - - 2.8 in -
    Note - - *Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb). -
    Note (2) - - Variable speed, hydraulically driven, dual braking system, three-roller fairlead. -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - - - Cat C7.1
    Net Power (SAE J1349:2011) - - - 249 HP
    Net Power (ISO 9249:2007) - - - 249 HP
    Emissions - - - U.S. EPA Tier 4 Final/EU Stage V
    Rated Speed - - - 2200 r/min
    Gross Power (SAE J1995:2014) - - - 284 HP
    Engine Power (ISO 14396:2002) - - - 275 HP
    Peak Torque - 1,400 rpm - - - 902 lb/ft
    Torque Rise - - - 52%
    Bore - - - 4.1 in
    Stroke - - - 5.3 in
    Displacement - - - 427.8 in³
    High Idle Speed - - - 2270 r/min
    Low Idle Speed - - - 800 r/min
    Maximum Altitude without Derating - - - 9842.5 ft
    Note - - - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - - - 48526 lb

    Scoops
    Chip Scoop Doze Capacity - - - 37.9 yd³
    Chip Scoop Carry Capacity - - - 19 yd³

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - - - Cat C7.1
    Emissions - - - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
    Rated Speed - - - 2200 r/min
    Net Power (SAE J1349:2011) - - - 249 HP
    Gross Power (SAE J1995:2014) - - - 286 HP
    Engine Power (ISO 14396:2002) - - - 275 HP
    Peak Torque - 1,400 rpm - - - 749 lb/ft
    Torque Rise - - - 26%
    Bore - - - 4.1 in
    Stroke - - - 5.3 in
    Displacement - - - 427.8 in³
    High Idle Speed - - - 2270 r/min

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - - - 47887 lb

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - - - 52280 lb

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - - - 51639 lb

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit - - - Pilot operated LS valve with EH
    Lift/Tilt System - - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - - 23.5 gal/min
    Relief Valve Setting - Lift/Tilt - - - 3190 psi
    Cylinders, Double Acting - Lift, Bore and Stroke - - - 120 mm × 915 mm (4.7 in × 36.0 in)
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - - 101.6 mm × 234 mm (4.0 in × 9.2 in)
    Pilot System - - - Open center, fixed displacement gear
    Pilot Relief Valve Setting - - - 3046 psi

    Hydraulic System - Steering
    Steering System - Circuit - - - Pilot, load sensing
    Steering System - Pump - - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - - 38.8 gal/min
    Relief Valve Setting - Steering - - - 4003 psi
    Total Steering Angle - - - 72°
    Steering Cycle Times - High Idle - - - 3 s
    Steering Cycle Times - Low Idle - - - 8.2 s

    Axles
    Front - - - Planetary – Fixed
    Rear - - - Planetary – Oscillating
    Oscillation Angle - - - ±10°

    Braking System
    Service Brakes - - - Single Disc Wet (enclosed) 4 WHL
    Parking Brake - - - Drum and Shoe, Spring Applied, Hydraulic Released

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 111 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A)

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 109 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 112 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 110 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A).
    Add a Similar Product: