CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    D1 Dozer
    View Product
    D11 Dozer
    View Product Remove
    854 Wheel Dozer
    View Product Remove
    814 Wheel Dozer
    View Product Remove

    Engine
    Engine Model Cat C3.6 - Cat C32B -
    Power - Net 80 HP - - -
    Displacement 220 in³ - 1958 in² -
    Net Power - 2,200 rpm - SAE J1349 80 HP - - -
    Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 80 HP - - -
    Power Train Hydrostatic - - -
    Note (1) Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator. - Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. -
    Note (2) All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. - Net torque rise meets SAE J139. -
    Gross Power - - 907 HP -
    Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 - - 900 HP -
    Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249 - - 814 HP -
    Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 - - 907 HP -
    Emissions (Tier 2 Equivalent): Net Power ISO - 9249 - - 823 HP -
    Rated Speed - - 1750 r/min -
    Bore - - 5.7 in -
    Stroke - - 6.4 in -
    Peak Torque - 1,200 rpm - - 3139 lb/ft -
    Torque Rise - - 30 % -
    Note (3) - - No engine derating required up to 3050 m (10,000 ft) altitude. -

    Weights
    Operating Weight 17855 lb 229800 lb 224647 lb -
    Operating Weight - LGP 18839 lb - - -
    Note (1) Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank. D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator. - -
    Operating Weight - LGP, 762 mm/30 in 19295 lb - - -
    Note (2) For machine with ripper, add 554 kg (1,222 lb). D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator. - -
    Operating Weight - Carrydozer - 250665 lb - -

    Transmission
    Drive Pumps 1 - - -
    Maximum Travel Speed - Reverse 6.2 mile/h - - -
    Relief Valve Settings 7033 psi - - -
    Maximum Travel Speed - Forward 5.6 mile/h - - -
    Track Motors 2 - - -
    1.0 Forward - 2.5 mile/h - -
    2.0 Forward - 4.4 mile/h - -
    3.0 Forward - 7.6 mile/h - -
    1.0 Reverse - 3 mile/h - -
    2.0 Reverse - 5.3 mile/h - -
    3.0 Reverse - 9.1 mile/h - -
    Drawbar Pull - 3 Forward - 46250 ft·lbf - -
    Drawbar Pull - 1 Forward - 148200 ft·lbf - -
    Drawbar Pull - 2 Forward - 82300 ft·lbf - -
    Transmission Type - - Cat Planetary Power Shift Cat Planetary Power Shift
    Converter Drive - Forward 1 - - 4.4 mile/h -
    Converter Drive - Forward 2 - - 7.7 mile/h -
    Converter Drive - Forward 3 - - 13.2 mile/h -
    Converter Drive - Reverse 1 - - 4.8 mile/h -
    Converter Drive - Reverse 2 - - 8.4 mile/h -
    Converter Drive - Reverse 3 - - 14.6 mile/h -
    Direct Drive - Forward 1 - - Lock-up disabled -
    Direct Drive - Forward 2 - - 8.1 mile/h -
    Direct Drive - Forward 3 - - 14.2 mile/h -
    Direct Drive - Reverse 1 - - 5 mile/h -
    Direct Drive - Reverse 2 - - 8.9 mile/h -
    Direct Drive - Reverse 3 - - 15.6 mile/h -
    Note - - Travel speeds based on 45/65-45 L-5 46 ply tires. -
    Forward - 1 - - - 3.7 mile/h
    Forward - 2 - - - 6.5 mile/h
    Forward - 3 - - - 11.2 mile/h
    Forward - 4 - - - 19.4 mile/h
    Reverse - 1 - - - 4.2 mile/h
    Reverse - 2 - - - 7.3 mile/h
    Reverse - 3 - - - 12.8 mile/h
    Reverse - 4 - - - 22.1 mile/h

    Hydraulic Controls
    Pump Output 17.2 gal/min - - -
    Relief Valve Settings 2988 psi - - -
    Pump Type - Variable displacement piston pump - -
    Combined Pump Output - Implement - 177 gal/min - -

    Ripper
    Type Parallelogram - - -
    Number of Shanks 3 - - -
    Height 6.5 in - - -
    Weight 1222 lb - - -
    Maximum Ground Clearance Under Tip 17.6 in - - -
    Maximum Digging Depth 13.3 in - - -
    Overall Width 67.3 in - - -
    Maximum Reach - Ground Line 30.2 in - - -

    Cab
    FOPS ISO 3449:2005 Level II - - -
    ROPS ISO 3471:2008 - - -
    ROPS/FOPS - - ISO 3471:2008 and ISO 3449:2005 Level II Standards -

    Undercarriage
    Length - Track on Ground - LGP, 762 mm (30 in) 89 in - - -
    Length - Track on Ground - LGP 89 in - - -
    Track Gauge - LGP 68 in - - -
    Shoe Width - LGP, 762 mm (30 in) 30 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    Shoe Width - LGP 25 in - - -
    Track Gauge 59 in 114 in - -
    Shoe Width - Standard 16 in - - -
    Ground Pressure - LGP 4.3 psi - - -
    Ground Pressure - LGP, 762 mm (30 in) 3.7 psi - - -
    Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 43 - - -
    Number of Rollers - Each Side 6 - - -
    Length of Track on Ground 89 in - - -
    Number of Shoes - Each Side - Abrasion Undercarriage 38 - - -
    Ground Pressure 6.45 psi - - -
    Shoe Type - Extreme Service - -
    Width - Shoe - 28 in - -
    Width - Shoe - CD - 36 in - -
    Shoes/Side - 41 - -
    Grouser Height - 4 in - -
    Pitch - 12.5 in - -
    Ground Clearance* - 30.6 in - -
    Length - Track on Ground - 175 in - -
    Ground Contact Area - 9781 in² - -
    Ground Contact Area - CD - 12605 in² - -
    Track Rollers/Side - 8 - -
    Number of Carrier Rollers - 1 per side (optional) - -

    Service Refill Capacities
    Final Drive - Each - LGP 2.6 gal (US) - - -
    Cooling System 4.2 gal (US) 46.8 gal (US) 53 gal (US) -
    Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) - - -
    Transmission - Hydraulic Tank 23.8 gal (US) - - -
    Crankcase - With Filter 2.8 gal (US) - - -
    Fuel Tank 51.5 gal (US) - - 132.1 gal (US)
    Final Drives - Each Side 2.6 gal (US) - - -
    Cooling System Refill - Tier 2 Equivalent Engine - 41.7 gal (US) - -
    Engine Crankcase - 35.1 gal (US) - 5.3 gal (US)
    Power Train - 120 gal (US) - -
    Power Train - Refill Volume - 103.3 gal (US) - -
    Final Drive - Each - 12.4 gal (US) - -
    Roller Frames - Each - 24.8 gal (US) - -
    Hydraulic Tank - 42.2 gal (US) - -
    Hydraulic System Tank and Chassis - 64.7 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Standard) - 117.6 gal (US) - -
    Hydraulic System Chassis + Blade and Ripper (Carrydozer) - 143.4 gal (US) - -
    Fuel Tank - Standard - - 413 gal (US) -
    Crankcase - - 32 gal (US) -
    Transmission - - 45 gal (US) 13.2 gal (US)
    Differential - Final Drives - Front - - 98 gal (US) 17.2 gal (US)
    Differential - Final Drives - Rear - - 90 gal (US) 17.2 gal (US)
    Hydraulic System - Steering and Engine Cooling Fan - Tank Only - - 77 gal (US) -
    Note (1) - - - All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo -
    Diesel Exhaust Fluid Tank - - - 4.2 gal (US)
    Cooling Systems - Tier 4 Final/EU Stage V - - - 21.4 gal (US)
    Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA - - - 19.3 gal (US)
    Hydraulic System - Implement/Steering - - - 34.1 gal (US)
    Hydraulic Tank Only - - - 19.8 gal (US)

    Air Conditioning System
    Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -
    Note (1) - The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons) - -

    Dimensions
    BLADE: Blade Capacity (SAE) - LGP 2.17 yd³ - - -
    BLADE: Blade Lift Height - LGP 28.7 in - - -
    BLADE: Maximum Tilt - LGP 17.2 in - - -
    BLADE: Blade Width - LGP 124 in - - -
    Ground Clearance - LGP 13 in - - -
    BLADE: Blade Width at Maximum Angle - LGP 113.1 in - - -
    BLADE: Digging Depth - LGP 23 in - - -
    Track Gauge - LGP 67.9 in - - -
    Ground Clearance - LGP, 762 mm (30 in) 13 in - - -
    BLADE: Blade Height - LGP 33.8 in - - -
    Overall Length - With Blade - LGP, 762 mm (30 in) 167.8 in - - -
    Track Gauge - LGP, 762 mm (30 in) 73 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58° - - -
    Note *Abrasion Undercarriage - - -
    BLADE: Maximum Angle (either side) - LGP 25° - - -
    Overall Length - With Blade - LGP 167.8 in - - -
    BLADE: Blade Width at Maximum Angle - Standard 95.2 in - - -
    BLADE: Digging Depth - Standard 23.2 in - - -
    BLADE: Blade Width - Standard 104.2 in - - -
    BLADE: Blade Lift Height - Standard 28.7 in - - -
    Ground Clearance - Standard 13 in - - -
    BLADE: Blade Cutting Edge Angle, Adjustable - Standard 52° to 58° - - -
    BLADE: Maximum Angle (either side) - Standard 25° - - -
    BLADE: Maximum Tilt - Standard 14.5 in - - -
    BLADE: Blade Capacity (SAE) - Standard 1.99 yd³ - - -
    Track Gauge - Standard 58.9 in - - -
    BLADE: Blade Height - Standard 35.8 in - - -
    Overall Length - With Blade - Standard 168 in - - -
    Length of Basic Dozer (without blade) - LGP, 762 mm (30 in) 129.6 in - - -
    Width of Dozer (standard shoes, no blade) - Standard 74.8 in - - -
    Length of Basic Dozer (without blade) - Standard 129.6 in - - -
    Length of Basic Dozer (without blade) - LGP 129.6 in - - -
    Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in) 94.9 in - - -
    Dozer Height - LGP 108.9 in - - -
    Width of Dozer (standard shoes, no blade) - LGP 92.9 in - - -
    Dozer Height - LGP, 762 mm (30 in) 108.9 in - - -
    Dozer Height - Standard 108.9 in - - -

    High Performance Winch
    Weight 1345 lb - - -
    Drum diameter 10 in - - -
    Winch drive Hydrostatic - - -
    Winch length 27.76 in - - -
    Maximum line pull – bare drum 40000 lb - - -
    Maximum line speed – full drum 207 ft/min - - -
    Drum width 10.8 in - - -
    Drum capacity – optional 256 ft - - -
    Rope diameter – recommended 0.63 in - - -
    Maximum line pull – full drum 25000 lb - - -
    Rope diameter – optional 0.75 in - - -
    Speed Variable - - -
    Maximum line speed – bare drum 131 ft/min - - -
    Throat clearance 6.75 in - - -
    Drum capacity – recommended cable 371 ft - - -
    Overall width 29.2 in - - -
    Control Hydraulic - - -

    Retrieval Winch
    Drum Diameter 8 in - - -
    Drum Width 9.65 in - - -
    Throat Clearance 5.6 in - - -
    Winch Length 35.63 in - - -
    Overall width 27.91 in - - -
    Weight 1747 lb - - -
    Maximum Line Pull - Full Drum 79 ft/min - - -
    Drum Capacity - Recommended Cable 277 ft - - -
    Maximum Line Pull - Bare Drum 50 ft/min - - -
    Drum Capacity - Optional Cable 195 ft - - -
    Maximum Line Speed - Full Drum 20350 lb - - -
    Control Hydraulic - - -
    Maximum Line Speed - Bare Drum 32150 lb - - -
    Rope Diameter - Optional 0.75 in - - -
    Winch Drive Hydraulic - - -
    Rope Diameter - Recommended 0.63 in - - -
    Speed Variable - - -

    Engine - U.S. EPA Tier 4 Final/EU Stage V
    Engine Model - Cat® C32 - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP - -
    Displacement - 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 955 HP - -
    Note (1) - *Excludes all fan losses. - -
    Note (2) - Engine ratings apply at 1,800 rpm. - -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Blades
    Semi-Universal (SU)* Capacity - 35.6 yd³ - -
    Semi-Universal (SU)* Width Over Endbits - 219.8 in - -
    U-Blade Capacity - 45 yd³ - -
    U-Blade Width - 249.6 in - -
    Reclamation Universal - Blade capacity (SAE J1265) - 55 yd³ - -
    Reclamation Universal - Width with blade (over end bits) - 251.8 in - -
    Carry Dozer - Blade capacity (SAE J1265) - 57 yd³ - -
    Carry Dozer - Width with blade (over end bits) - 263.9 in - -
    Blade Capacities - - 30.5 to 44.8 m3 (40 to 58.6 yd3) -

    Engine - U.S. EPA Tier 2 Equivalent
    Engine Model - Cat® C32 - -
    Displacement - 1959 in³ - -
    Engine Power - Net SAE J1349/ISO 9249 - Forward - 850 HP - -
    Engine Power - Net SAE J1349/ISO 9249 - Reverse - 957 HP - -
    Note (1) - *Excludes all fan losses. - -
    Note (2) - Engine ratings apply at 1,800 rpm. - -
    Note (3) - Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required. - -

    Fuel Tank Capacities
    Fuel Tank - Total Volume - 500 gal (US) - -
    Fuel Tank - Usable Volume - 475 gal (US) - -

    Ripper - Single Shank
    Maximum penetration force * (shank vertical) - 66000 lb - -
    Maximum penetration depth (standard tip) - 63.5 in - -
    Pryout Force - 148510 lb - -

    Ripper - Single Shank, Deep Ripping
    Maximum penetration force * (shank vertical) - 66110 lb - -
    Maximum penetration depth (standard tip) - 85.5 in - -
    Pryout Force - 148510 lb - -

    Ripper - Multi-Shank, Adjustable Parallelogram
    Overall Beam Width - 131.1 in - -
    Maximum Penetration Force - Shank Vertical - 77350 lb - -
    Maximum Penetration - Standard Tip - 43.3 in - -
    Pry-Out Force - Multi-Shank Ripper with One Tooth - 145640 lb - -

    Dimensions - D11 Carrydozer
    Width at Outside of Track (710 mm Track Shoe) - 149.8 in - -
    Length with SU-Blade** - No rear attachment - 345.1 in - -
    Overall Length SU-Blade and SS Ripper** - 421.7 in - -

    Standards
    ROPS - Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008 - -
    FOPS - Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II - -
    Sound (1) - The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed). - -
    Sound (2) - The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed). - -

    Dimensions - D11
    Ground Clearance* - 31.4 in - -
    Track Gauge - 114 in - -
    Width at Outside of Track (710 mm Track Shoe) - 142 in - -
    Height (ROPS/canopy)* - 185.9 in - -
    Length of Track on Ground - 175 in - -
    Length with SU-Blade** - No rear attachment - 337.8 in - -
    Overall Length SU-Blade and SS Ripper** - 414.4 in - -
    Note - *Includes grouser height for total dimensions on hard surfaces. - -

    Hydraulic System - Lift/Tilt
    Output at 1,850 rpm and 6900 kPa (1,000 psi) - - 161 gal/min -
    Cylinders, Double Acting - Lift, Bore and Stroke - - 177 mm × 1760 mm (0.58 ft × 5.8 ft) 120 mm × 915 mm (4.7 in × 36.0 in)
    Cylinder, Double Acting - Tilt and Tip, Bore and Stroke - - 267 mm × 286 mm (0.88 ft × 0.94 ft) -
    Lift/Tilt System - Circuit - - - Pilot operated LS valve with EH
    Lift/Tilt System - - - Variable displacement piston
    Maximum Flow at 2,200 rpm - - - 23.5 gal/min
    Relief Valve Setting - Lift/Tilt - - - 3190 psi
    Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke - - - 101.6 mm × 234 mm (4.0 in × 9.2 in)
    Pilot System - - - Open center, fixed displacement gear
    Pilot Relief Valve Setting - - - 3046 psi

    Axles
    Front - - Fixed Planetary – Fixed
    Rear - - Trunnion Planetary – Oscillating
    Oscillation Angle - - - ±10°

    Brakes
    Brakes - - Meets ISO 3540:2011 -

    Dimensions (Approximate)
    Height - Top of ROPS - - 18.25 ft -
    Height - Top of Exhaust Pipe - - 17.17 ft 11.3 ft
    Height - Top of Hood - - 13 ft 8.7 ft
    Ground Clearance - - 27 in -
    Centerline of Front Axle to Hitch - - 9.67 ft 5.5 ft
    Centerline of Rear Axle to Edge of Bumper - - 13.75 ft -
    Wheel Base - - 19.25 ft 11 ft
    Length - With Blade on Ground - - 44 ft -
    Height to Top of Beacon - - - 13.1 ft
    Height - Top of Cab - - - 12.1 ft
    Height to Top of Radiator Guard - - - 8 ft
    Ground Clearance to Hitch - - - 1.4 ft
    Ground Clearance to Transmission Guard - - - 1.4 ft
    Ground Clearance to Bottom of Bumper - - - 2.3 ft
    Centerline of Rear Axle to Bumper - - - 6.5 ft
    Width over Platform - - - 10.3 ft
    Overall Length to Front Tire - - - 21 ft
    Overall Machine Length with Straight Blade - - - 23.6 ft
    Overall Machine Length with Coal Blade - - - 25.5 ft

    Hydraulic System - Steering
    Steering System - Pump - - Piston, variable displacement Variable displacement piston
    Minimum Turning Radius - Over Blade - - 31 ft -
    Steering System - Circuit - - Pilot, load sensing Pilot, load sensing
    Total Steering Angle - - 86 degrees 72°
    Relief Valve Setting - - 5004 psi -
    Maximum Flow at 2,200 rpm - - - 38.8 gal/min
    Relief Valve Setting - Steering - - - 4003 psi
    Steering Cycle Times - High Idle - - - 3 s
    Steering Cycle Times - Low Idle - - - 8.2 s

    Operating Specifications
    Operating Weight - - 224647 lb -

    Sound Performance Levels
    Sound Performance - - • The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was -

    Engine - Tier 4 Final/EU Stage V
    Engine Model - - - Cat C7.1
    Net Power (SAE J1349:2011) - - - 249 HP
    Net Power (ISO 9249:2007) - - - 249 HP
    Emissions - - - U.S. EPA Tier 4 Final/EU Stage V
    Rated Speed - - - 2200 r/min
    Gross Power (SAE J1995:2014) - - - 284 HP
    Engine Power (ISO 14396:2002) - - - 275 HP
    Peak Torque - 1,400 rpm - - - 902 lb/ft
    Torque Rise - - - 52%
    Bore - - - 4.1 in
    Stroke - - - 5.3 in
    Displacement - - - 427.8 in³
    High Idle Speed - - - 2270 r/min
    Low Idle Speed - - - 800 r/min
    Maximum Altitude without Derating - - - 9842.5 ft
    Note - - - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

    Operating Specifications - Tier 4 Final/EU Stage V
    Operating Weight - - - 48526 lb

    Scoops
    Chip Scoop Doze Capacity - - - 37.9 yd³
    Chip Scoop Carry Capacity - - - 19 yd³

    Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Engine Model - - - Cat C7.1
    Emissions - - - Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
    Rated Speed - - - 2200 r/min
    Net Power (SAE J1349:2011) - - - 249 HP
    Gross Power (SAE J1995:2014) - - - 286 HP
    Engine Power (ISO 14396:2002) - - - 275 HP
    Peak Torque - 1,400 rpm - - - 749 lb/ft
    Torque Rise - - - 26%
    Bore - - - 4.1 in
    Stroke - - - 5.3 in
    Displacement - - - 427.8 in³
    High Idle Speed - - - 2270 r/min

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
    Operating Weight - - - 47887 lb

    Operating Specifications - Tier 4 Final/EU Stage V - Scoop
    Operating Weight - - - 52280 lb

    Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
    Operating Weight - - - 51639 lb

    Braking System
    Service Brakes - - - Single Disc Wet (enclosed) 4 WHL
    Parking Brake - - - Drum and Shoe, Spring Applied, Hydraulic Released

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 111 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A)

    Sound Performance - Tier 4 Final/EU Stage V - Suppression
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 109 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 112 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A).

    Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
    Operator Sound Level (ISO 6396) - - - 70 dB(A)
    Machine Sound Level (ISO 6395) - - - 110 dB(A)
    Note (1) - - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (2) - - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
    Note (4) - - - The operator sound pressure level uncertainty is ± 2 dB(A).
    Add a Similar Product: