Compare

Compare Equipment Go Back

Engine
	D1 Dozer View Product	D11 Dozer View Product Remove	854 Wheel Dozer View Product Remove	D9 Dozer View Product Remove
Engine Model	Cat C3.6	-	Cat C32B	-
Power - Net	80 HP	-	-	-
Displacement	220 in³	-	1958 in²	-
Net Power - 2,200 rpm - SAE J1349	80 HP	-	-	-
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269	80 HP	-	-	-
Power Train	Hydrostatic	-	-	-
Note (1)	Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.	-	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.	-
Note (2)	All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.	-	Net torque rise meets SAE J139.	-
Gross Power	-	-	907 HP	-
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995	-	-	900 HP	-
Emissions (U.S. EPA Tier 4 Final): Net Power ISO - 9249	-	-	814 HP	-
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995	-	-	907 HP	-
Emissions (Tier 2 Equivalent): Net Power ISO - 9249	-	-	823 HP	-
Rated Speed	-	-	1750 r/min	-
Bore	-	-	5.7 in	-
Stroke	-	-	6.4 in	-
Peak Torque - 1,200 rpm	-	-	3139 lb/ft	-
Torque Rise	-	-	30 %	-
Note (3)	-	-	No engine derating required up to 3050 m (10,000 ft) altitude.	-
Weights
Operating Weight	17855 lb	229800 lb	224647 lb	110225 lb
Operating Weight - LGP	18839 lb	-	-	-
Note (1)	Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.	D11 Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.	-	D9 Operation Weight includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes and operator.
Operating Weight - LGP, 762 mm/30 in	19295 lb	-	-	-
Note (2)	For machine with ripper, add 554 kg (1,222 lb).	D11 CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, singleshank ripper, and operator.	-	D9 Operation Weight includes base machine chassis with cab, pivot shaft, roller frames, track and ROPS.
Operating Weight - Carrydozer	-	250665 lb	-	-
Shipping Weight	-	-	-	84373 lb
Transmission
Drive Pumps	1	-	-	-
Maximum Travel Speed - Reverse	6.2 mile/h	-	-	-
Relief Valve Settings	7033 psi	-	-	-
Maximum Travel Speed - Forward	5.6 mile/h	-	-	-
Track Motors	2	-	-	-
1.0 Forward	-	2.5 mile/h	-	2.2 mile/h
2.0 Forward	-	4.4 mile/h	-	3.9 mile/h
3.0 Forward	-	7.6 mile/h	-	6.8 mile/h
1.0 Reverse	-	3 mile/h	-	2.7 mile/h
2.0 Reverse	-	5.3 mile/h	-	4.8 mile/h
3.0 Reverse	-	9.1 mile/h	-	8.4 mile/h
Drawbar Pull - 3 Forward	-	46250 ft·lbf	-	-
Drawbar Pull - 1 Forward	-	148200 ft·lbf	-	-
Drawbar Pull - 2 Forward	-	82300 ft·lbf	-	-
Transmission Type	-	-	Cat Planetary Power Shift	-
Converter Drive - Forward 1	-	-	4.4 mile/h	-
Converter Drive - Forward 2	-	-	7.7 mile/h	-
Converter Drive - Forward 3	-	-	13.2 mile/h	-
Converter Drive - Reverse 1	-	-	4.8 mile/h	-
Converter Drive - Reverse 2	-	-	8.4 mile/h	-
Converter Drive - Reverse 3	-	-	14.6 mile/h	-
Direct Drive - Forward 1	-	-	Lock-up disabled	-
Direct Drive - Forward 2	-	-	8.1 mile/h	-
Direct Drive - Forward 3	-	-	14.2 mile/h	-
Direct Drive - Reverse 1	-	-	5 mile/h	-
Direct Drive - Reverse 2	-	-	8.9 mile/h	-
Direct Drive - Reverse 3	-	-	15.6 mile/h	-
Note	-	-	Travel speeds based on 45/65-45 L-5 46 ply tires.	-
Type	-	-	-	Planetary powershift
Hydraulic Controls
Pump Output	17.2 gal/min	-	-	-
Relief Valve Settings	2988 psi	-	-	-
Pump Type	-	Variable displacement piston pump	-	Piston-type geared to flywheel
Combined Pump Output - Implement	-	177 gal/min	-	-
Pump Output - Steering	-	-	-	96 gal/min
Fan Pump	-	-	-	21 gal/min
Tilt Cylinder Flow - Rod End Flow	-	-	-	53 gal/min
Tilt Cylinder Flow - Head End Flow	-	-	-	53 gal/min
Lift Cylinder Relief Valve Setting	-	-	-	3800 lbf/in
Tilt Cylinder Relief Valve Setting	-	-	-	2799 psi
Ripper - Lift - Relief Valve Setting	-	-	-	3800 psi
Ripper - Pitch - Relief Valve Setting	-	-	-	3800 psi
Steering System - Pressure	-	-	-	5874 psi
Tank Capacity	-	-	-	24 gal/min
Note (1)	-	-	-	Steering pump output measured at 1,750 engine rpm and 30 000 kPa (4,350 psi).
Note (2)	-	-	-	Implement pump output measured at 1,750 engine rpm and 20 000 kPa (2,900 psi).
Note (3)	-	-	-	Fan pump output measured at 1,750 engine rpm and 17 000 kPa (2,470 psi)
Ripper
Type	Parallelogram	-	-	-
Number of Shanks	3	-	-	-
Height	6.5 in	-	-	-
Weight	1222 lb	-	-	-
Maximum Ground Clearance Under Tip	17.6 in	-	-	-
Maximum Digging Depth	13.3 in	-	-	-
Overall Width	67.3 in	-	-	-
Maximum Reach - Ground Line	30.2 in	-	-	-
Cab
FOPS	ISO 3449:2005 Level II	-	-	-
ROPS	ISO 3471:2008	-	-	-
ROPS/FOPS	-	-	ISO 3471:2008 and ISO 3449:2005 Level II Standards	-
Undercarriage
Length - Track on Ground - LGP, 762 mm (30 in)	89 in	-	-	-
Length - Track on Ground - LGP	89 in	-	-	-
Track Gauge - LGP	68 in	-	-	-
Shoe Width - LGP, 762 mm (30 in)	30 in	-	-	-
Track Gauge - LGP, 762 mm (30 in)	73 in	-	-	-
Shoe Width - LGP	25 in	-	-	-
Track Gauge	59 in	114 in	-	88.6 in
Shoe Width - Standard	16 in	-	-	-
Ground Pressure - LGP	4.3 psi	-	-	-
Ground Pressure - LGP, 762 mm (30 in)	3.7 psi	-	-	-
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage	43	-	-	-
Number of Rollers - Each Side	6	-	-	-
Length of Track on Ground	89 in	-	-	-
Number of Shoes - Each Side - Abrasion Undercarriage	38	-	-	-
Ground Pressure	6.45 psi	-	-	-
Shoe Type	-	Extreme Service	-	Extreme Service
Width - Shoe	-	28 in	-	24 in
Width - Shoe - CD	-	36 in	-	-
Shoes/Side	-	41	-	43
Grouser Height	-	4 in	-	3.3 in
Pitch	-	12.5 in	-	9.4 in
Ground Clearance*	-	30.6 in	-	-
Length - Track on Ground	-	175 in	-	136.6 in
Ground Contact Area	-	9781 in²	-	45.6 ft²
Ground Contact Area - CD	-	12605 in²	-	-
Track Rollers/Side	-	8	-	8
Number of Carrier Rollers	-	1 per side (optional)	-	1 per side (optional)
Ground Clearance	-	-	-	18.1 in
Service Refill Capacities
Final Drive - Each - LGP	2.6 gal (US)	-	-	-
Cooling System	4.2 gal (US)	46.8 gal (US)	53 gal (US)	-
Diesel Exhaust Fluid (DEF) Tank	4.9 gal (US)	-	-	-
Transmission - Hydraulic Tank	23.8 gal (US)	-	-	-
Crankcase - With Filter	2.8 gal (US)	-	-	-
Fuel Tank	51.5 gal (US)	-	-	-
Final Drives - Each Side	2.6 gal (US)	-	-	-
Cooling System Refill - Tier 2 Equivalent Engine	-	41.7 gal (US)	-	-
Engine Crankcase	-	35.1 gal (US)	-	-
Power Train	-	120 gal (US)	-	-
Power Train - Refill Volume	-	103.3 gal (US)	-	-
Final Drive - Each	-	12.4 gal (US)	-	-
Roller Frames - Each	-	24.8 gal (US)	-	-
Hydraulic Tank	-	42.2 gal (US)	-	-
Hydraulic System Tank and Chassis	-	64.7 gal (US)	-	-
Hydraulic System Chassis + Blade and Ripper (Standard)	-	117.6 gal (US)	-	-
Hydraulic System Chassis + Blade and Ripper (Carrydozer)	-	143.4 gal (US)	-	-
Fuel Tank - Standard	-	-	413 gal (US)	-
Crankcase	-	-	32 gal (US)	-
Transmission	-	-	45 gal (US)	-
Differential - Final Drives - Front	-	-	98 gal (US)	-
Differential - Final Drives - Rear	-	-	90 gal (US)	-
Hydraulic System - Steering and Engine Cooling Fan - Tank Only	-	-	77 gal (US)	-
Note (1)	-	-	- All nonroad U.S. EPA Tier 4, European Union (EU) Stage IIIB and V, and Japan (MLIT) Step 4 diesel engines are required to use only Ultra Low Sulfer Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfer or less. Biodiesel blends up to B20 (20% blend by vo	-
Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	-	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430) the system contains 2.1 kg of refrigerant which has a CO2 equivalent of 3.003 metric tonnes.
Note (1)	-	The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warning Potential = 1430). The system contains 2.1 kg (4.6 lb) of refrigerant which has a CO2 equivalent of 3.003 metric tonnes (3.31 tons)	-	-
Dimensions
BLADE: Blade Capacity (SAE) - LGP	2.17 yd³	-	-	-
BLADE: Blade Lift Height - LGP	28.7 in	-	-	-
BLADE: Maximum Tilt - LGP	17.2 in	-	-	-
BLADE: Blade Width - LGP	124 in	-	-	-
Ground Clearance - LGP	13 in	-	-	-
BLADE: Blade Width at Maximum Angle - LGP	113.1 in	-	-	-
BLADE: Digging Depth - LGP	23 in	-	-	-
Track Gauge - LGP	67.9 in	-	-	-
Ground Clearance - LGP, 762 mm (30 in)	13 in	-	-	-
BLADE: Blade Height - LGP	33.8 in	-	-	-
Overall Length - With Blade - LGP, 762 mm (30 in)	167.8 in	-	-	-
Track Gauge - LGP, 762 mm (30 in)	73 in	-	-	-
BLADE: Blade Cutting Edge Angle, Adjustable - LGP	52° to 58°	-	-	-
Note	*Abrasion Undercarriage	-	-	-
BLADE: Maximum Angle (either side) - LGP	25°	-	-	-
Overall Length - With Blade - LGP	167.8 in	-	-	-
BLADE: Blade Width at Maximum Angle - Standard	95.2 in	-	-	-
BLADE: Digging Depth - Standard	23.2 in	-	-	-
BLADE: Blade Width - Standard	104.2 in	-	-	-
BLADE: Blade Lift Height - Standard	28.7 in	-	-	-
Ground Clearance - Standard	13 in	-	-	-
BLADE: Blade Cutting Edge Angle, Adjustable - Standard	52° to 58°	-	-	-
BLADE: Maximum Angle (either side) - Standard	25°	-	-	-
BLADE: Maximum Tilt - Standard	14.5 in	-	-	-
BLADE: Blade Capacity (SAE) - Standard	1.99 yd³	-	-	-
Track Gauge - Standard	58.9 in	-	-	-
BLADE: Blade Height - Standard	35.8 in	-	-	-
Overall Length - With Blade - Standard	168 in	-	-	-
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)	129.6 in	-	-	-
Width of Dozer (standard shoes, no blade) - Standard	74.8 in	-	-	-
Length of Basic Dozer (without blade) - Standard	129.6 in	-	-	-
Length of Basic Dozer (without blade) - LGP	129.6 in	-	-	-
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)	94.9 in	-	-	-
Dozer Height - LGP	108.9 in	-	-	-
Width of Dozer (standard shoes, no blade) - LGP	92.9 in	-	-	-
Dozer Height - LGP, 762 mm (30 in)	108.9 in	-	-	-
Dozer Height - Standard	108.9 in	-	-	-
High Performance Winch
Weight	1345 lb	-	-	-
Drum diameter	10 in	-	-	-
Winch drive	Hydrostatic	-	-	-
Winch length	27.76 in	-	-	-
Maximum line pull – bare drum	40000 lb	-	-	-
Maximum line speed – full drum	207 ft/min	-	-	-
Drum width	10.8 in	-	-	-
Drum capacity – optional	256 ft	-	-	-
Rope diameter – recommended	0.63 in	-	-	-
Maximum line pull – full drum	25000 lb	-	-	-
Rope diameter – optional	0.75 in	-	-	-
Speed	Variable	-	-	-
Maximum line speed – bare drum	131 ft/min	-	-	-
Throat clearance	6.75 in	-	-	-
Drum capacity – recommended cable	371 ft	-	-	-
Overall width	29.2 in	-	-	-
Control	Hydraulic	-	-	-
Retrieval Winch
Drum Diameter	8 in	-	-	-
Drum Width	9.65 in	-	-	-
Throat Clearance	5.6 in	-	-	-
Winch Length	35.63 in	-	-	-
Overall width	27.91 in	-	-	-
Weight	1747 lb	-	-	-
Maximum Line Pull - Full Drum	79 ft/min	-	-	-
Drum Capacity - Recommended Cable	277 ft	-	-	-
Maximum Line Pull - Bare Drum	50 ft/min	-	-	-
Drum Capacity - Optional Cable	195 ft	-	-	-
Maximum Line Speed - Full Drum	20350 lb	-	-	-
Control	Hydraulic	-	-	-
Maximum Line Speed - Bare Drum	32150 lb	-	-	-
Rope Diameter - Optional	0.75 in	-	-	-
Winch Drive	Hydraulic	-	-	-
Rope Diameter - Recommended	0.63 in	-	-	-
Speed	Variable	-	-	-
Engine - U.S. EPA Tier 4 Final/EU Stage V
Engine Model	-	Cat® C32	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	850 HP	-	-
Displacement	-	1959 in³	-	1106 in³
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	955 HP	-	-
Note (1)	-	*Excludes all fan losses.	-	All Engine ratings apply at 1,750 rpm.
Note (2)	-	Engine ratings apply at 1,800 rpm.	-	No derating required up to 2499 m (8,200 ft).
Note (3)	-	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	-	-
Bore	-	-	-	5.7 in³
Stroke	-	-	-	7.2 in³
Engine Power - Gross SAE J1995	-	-	-	477 HP
Engine Power - ISO 14396	-	-	-	468 HP
Engine Power - Net SAE J1349/ISO 9249	-	-	-	440 HP
Emissions	-	-	-	U.S. EPA Tier 4 / EU Stage V
Blades
Semi-Universal (SU)* Capacity	-	35.6 yd³	-	-
Semi-Universal (SU)* Width Over Endbits	-	219.8 in	-	-
U-Blade Capacity	-	45 yd³	-	-
U-Blade Width	-	249.6 in	-	-
Reclamation Universal - Blade capacity (SAE J1265)	-	55 yd³	-	-
Reclamation Universal - Width with blade (over end bits)	-	251.8 in	-	-
Carry Dozer - Blade capacity (SAE J1265)	-	57 yd³	-	-
Carry Dozer - Width with blade (over end bits)	-	263.9 in	-	-
Blade Capacities	-	-	30.5 to 44.8 m3 (40 to 58.6 yd3)	-
Engine - U.S. EPA Tier 2 Equivalent
Engine Model	-	Cat® C32	-	-
Displacement	-	1959 in³	-	-
Engine Power - Net SAE J1349/ISO 9249 - Forward	-	850 HP	-	-
Engine Power - Net SAE J1349/ISO 9249 - Reverse	-	957 HP	-	-
Note (1)	-	*Excludes all fan losses.	-	-
Note (2)	-	Engine ratings apply at 1,800 rpm.	-	-
Note (3)	-	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.	-	-
Fuel Tank Capacities
Fuel Tank - Total Volume	-	500 gal (US)	-	-
Fuel Tank - Usable Volume	-	475 gal (US)	-	-
Ripper - Single Shank
Maximum penetration force * (shank vertical)	-	66000 lb	-	35520 lbf
Maximum penetration depth (standard tip)	-	63.5 in	-	48.5 in
Pryout Force	-	148510 lb	-	74637 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	-	34.7 in
Number of Pockets	-	-	-	1
Weight	-	-	-	10701 lb
Total Operating Weight* (with SU Blade and noted ripper)	-	-	-	110205 lb
Note	-	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Single Shank, Deep Ripping
Maximum penetration force * (shank vertical)	-	66110 lb	-	38667 lbf
Maximum penetration depth (standard tip)	-	85.5 in	-	68 in
Pryout Force	-	148510 lb	-	74412 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	-	32.2 in
Number of Pockets	-	-	-	1
Weight	-	-	-	10981 lb
Total Operating Weight* (with SU Blade and noted ripper)	-	-	-	110485 lb
Note	-	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Ripper - Multi-Shank, Adjustable Parallelogram
Overall Beam Width	-	131.1 in	-	-
Maximum Penetration Force - Shank Vertical	-	77350 lb	-	34621 lbf
Maximum Penetration - Standard Tip	-	43.3 in	-	31.4 in
Pry-Out Force - Multi-Shank Ripper with One Tooth	-	145640 lb	-	81156 lbf
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole	-	-	-	34.6 in
Number of Pockets	-	-	-	3
Weight	-	-	-	12136 lb
Total Operating Weight* - With SU-Blade and Ripper	-	-	-	111739 lb
Note	-	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Dimensions - D11 Carrydozer
Width at Outside of Track (710 mm Track Shoe)	-	149.8 in	-	-
Length with SU-Blade** - No rear attachment	-	345.1 in	-	-
Overall Length SU-Blade and SS Ripper**	-	421.7 in	-	-
Standards
ROPS	-	Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008	-	Rollover Protective Structure (ROPS) meets the following criteria ISO 3471:2008.
FOPS	-	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II	-	Falling Object Protective Structure (FOPS) meets the following criteria ISO 3449:2005 LEVEL II.
Sound (1)	-	The exterior sound pressure level for the standard machine (ISO 6396:2008) is 116 dB(A) (sound suppressed).	-	The average dynamic operator sound pressure level when ISO 6396:2008 is used to measure the value for an enclosed cab is 78 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine c
Sound (2)	-	The operator equivalent sound pressure level (ISO 6396:2008) is 78 dB(A) (sound suppressed).	-	Hearing protection may be needed when the machine is operated with an open operator station for extended periods, in a noisy environment, or with a cab that is not properly maintained.
Sound	-	-	-	The average dynamic spectator sound power level when ISO 6395:2008 is used to measure the value for a machine is 116 dB(A). The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling
Dimensions - D11
Ground Clearance*	-	31.4 in	-	-
Track Gauge	-	114 in	-	-
Width at Outside of Track (710 mm Track Shoe)	-	142 in	-	-
Height (ROPS/canopy)*	-	185.9 in	-	-
Length of Track on Ground	-	175 in	-	-
Length with SU-Blade** - No rear attachment	-	337.8 in	-	-
Overall Length SU-Blade and SS Ripper**	-	414.4 in	-	-
Note	-	*Includes grouser height for total dimensions on hard surfaces.	-	-
Hydraulic System - Lift/Tilt
Output at 1,850 rpm and 6900 kPa (1,000 psi)	-	-	161 gal/min	-
Cylinders, Double Acting - Lift, Bore and Stroke	-	-	177 mm × 1760 mm (0.58 ft × 5.8 ft)	-
Cylinder, Double Acting - Tilt and Tip, Bore and Stroke	-	-	267 mm × 286 mm (0.88 ft × 0.94 ft)	-
Axles
Front	-	-	Fixed	-
Rear	-	-	Trunnion	-
Brakes
Brakes	-	-	Meets ISO 3540:2011	-
Dimensions (Approximate)
Height - Top of ROPS	-	-	18.25 ft	-
Height - Top of Exhaust Pipe	-	-	17.17 ft	-
Height - Top of Hood	-	-	13 ft	-
Ground Clearance	-	-	27 in	-
Centerline of Front Axle to Hitch	-	-	9.67 ft	-
Centerline of Rear Axle to Edge of Bumper	-	-	13.75 ft	-
Wheel Base	-	-	19.25 ft	-
Length - With Blade on Ground	-	-	44 ft	-
Ground Clearance*	-	-	-	18.1 in
Track Gauge	-	-	-	88.6 in
Width - Without Trunnions - Standard Shoe	-	-	-	113 in
Width - Over Trunnions	-	-	-	130.3 in
Height - FOPS Cab*	-	-	-	150.4 in
Height - Top of Stack*	-	-	-	152.6 in
Height - ROPS/Canopy*	-	-	-	157.5 in
Drawbar Height (Center of Clevis)*	-	-	-	30 in
Length - Track on Ground	-	-	-	136.6 in
Overall Length - Basic Tractor	-	-	-	193.3 in
Length - Basic Tractor - With Drawbar	-	-	-	206.4 in
Length - Basic Tractor - With Winch	-	-	-	218.3 in
Length - With SU-Blade**	-	-	-	259.9 in
Length - With U-Blade	-	-	-	274.3 in
Length - With Single-Shank Ripper	-	-	-	257 in
Length - With Multi-Shank Ripper	-	-	-	257.4 in
Overall Length - SU-Blade/SS Ripper	-	-	-	323.6 in
Note (1)	-	-	-	*Includes grouser height for total dimensions on hard surfaces.
Hydraulic System - Steering
Steering System - Pump	-	-	Piston, variable displacement	-
Minimum Turning Radius - Over Blade	-	-	31 ft	-
Steering System - Circuit	-	-	Pilot, load sensing	-
Total Steering Angle	-	-	86 degrees	-
Relief Valve Setting	-	-	5004 psi	-
Operating Specifications
Operating Weight	-	-	224647 lb	-
Sound Performance Levels
Sound Performance	-	-	• The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed. • The operator sound pressure level was measured according to ISO 6396:2008. The measurement was	-
Engine - U.S. EPA Tier 2/3 Equivalent
Engine Model	-	-	-	Cat® C18
Engine Power - Net SAE J1349/ISO 9249	-	-	-	452 HP
Bore	-	-	-	5.7 in³
Stroke	-	-	-	7.2 in
Displacement	-	-	-	1106 in³
Engine Power - Gross SAE J1995	-	-	-	487 HP
Engine Power - ISO 14396	-	-	-	479 HP
Emissions	-	-	-	U.S. EPA Tier 2 or Tier 3 equivalent
Note (1)	-	-	-	All engine ratings apply at 1,750 rpm.
Note (2)	-	-	-	No derating required up to 4267 m (14,000 ft) altitude.
Steering and Brakes
Steering Type	-	-	-	Differential
Brake Type	-	-	-	Spring Applied Wet Disc
Brake Diameter	-	-	-	15.5 in
Brake Count	-	-	-	8
FLUID CAPACITIES
Fuel Tank (Splash Fill)	-	-	-	254 gal (US)
DEF Tank (Tier 4 only)	-	-	-	9.5 gal (US)
Fuel Tank (Fast Fill)	-	-	-	248 gal (US)
Cooling System	-	-	-	21 gal (US)
Engine Crankcase*	-	-	-	10 gal (US)
Powertrain	-	-	-	40 gal (US)
Final Drives (each)	-	-	-	4 gal (US)
Roller Frames (each)	-	-	-	12 gal (US)
Pivot Shaft Oil	-	-	-	8 gal (US)
Hydraulic System Tank	-	-	-	24 gal (US)
Note	-	-	-	*With oil filters.
Note 2	-	-	-	Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULSTM or
Note 3	-	-	-	All non-road Tier 4 Final diesel engines are required to use only ultra-low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less.
Note 4	-	-	-	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Blade - Semi-Universal
Blade Capacity (SAE J1265)	-	-	-	17.8 yd³
Blade Width (over end bits)	-	-	-	171.3 in
Blade Height	-	-	-	76.1 in
Maximum Digging Depth	-	-	-	23.9 in
Ground Clearance at Full Lift	-	-	-	56 in
Maximum Tilt	-	-	-	37 in
Blade Weight	-	-	-	10587 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	-	110205 lb
Note	-	-	-	* Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Blade - Universal
Blade Capacity (SAE J1265)	-	-	-	21.7 yd³
Blade Width (over end bits)	-	-	-	184.3 in
Blade Height	-	-	-	76.1 in
Maximum Digging Depth	-	-	-	23.9 in
Ground Clearance at Full Lift	-	-	-	56 in
Maximum Tilt	-	-	-	39.9 in
Blade Weight	-	-	-	12016 lb
Total Operating Weight* (with blade and single-shank ripper)	-	-	-	111362 lb
Note	-	-	-	*Total Operating Weight includes: single tilt hydraulics, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 610 mm (24 in) ES track shoes and the noted blade and ripper type.
Winches
Winch Model	-	-	-	PA 140VS
Weight*	-	-	-	3950 lb
Oil Capacity	-	-	-	4 gal (US)
Drum Width	-	-	-	12.6 in
Wire Cable Diameter - Recommended	-	-	-	1.13 in
Wire Cable Diameter - Optional	-	-	-	1.25 ft
Maximum Drum Capacity - Recommended Cable Length	-	-	-	257 in
Maximum Drum Capacity - Optional Cable Length	-	-	-	204 ft
Wire Cable Ferrule Size - Outside Diameter	-	-	-	2.4 in
Wire Cable Ferrule Size - Length	-	-	-	2.8 in
Note	-	-	-	*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Note (2)	-	-	-	Variable speed, hydraulically driven, dual braking system, three-roller fairlead.

Compare Equipment Go Back

D1 Dozer

D11 Dozer

854 Wheel Dozer

D9 Dozer

Engine

Weights

Transmission

Hydraulic Controls

Ripper

Cab

Undercarriage

Service Refill Capacities

Air Conditioning System

Dimensions

High Performance Winch

Retrieval Winch

Engine - U.S. EPA Tier 4 Final/EU Stage V

Blades

Engine - U.S. EPA Tier 2 Equivalent

Fuel Tank Capacities

Ripper - Single Shank

Ripper - Single Shank, Deep Ripping

Ripper - Multi-Shank, Adjustable Parallelogram

Dimensions - D11 Carrydozer

Standards

Dimensions - D11

Hydraulic System - Lift/Tilt

Axles

Brakes

Dimensions (Approximate)

Hydraulic System - Steering

Operating Specifications

Sound Performance Levels

Engine - U.S. EPA Tier 2/3 Equivalent

Steering and Brakes

FLUID CAPACITIES

Blade - Semi-Universal

Blade - Universal

Winches