Compare Equipment Go Back

995 Wheel Loader
988 XE Wheel Loader

Engine

Engine Model Cat® 3516E Cat® C18 ™ -
Emissions U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 -
Engine Power - ISO 14396 1847 HP - -
Gross Power - SAE J1995 1870 HP - -
Net Power - SAE J1349 - Standard Ambient 1739 HP - -
Net Power - SAE J1349 - High Ambient 1696 HP - -
Bore 6.7 in 5.7 in -
Stroke 8.5 in 7.2 in -
Displacement 4766 in³ 1105 in³ -
Peak Torque - 1,200 rpm - SAE J1995 8549 lb/ft 2230 ft·lbf -
Torque Rise 39% 58% -
Note (1) The power ratings apply when tested under the reference conditions for the specified standard. - -
Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. - -
Note (3) The gross power advertised is with the fan at maximum speed. - -
Net Power - SAE J1349 - 538 HP -
Engine Power - ISO 14396:2002 - 580 HP -
Gross Power - SAE J1995:2014 - 588 HP -
Rated Speed - 1,700 rpm -
Peak Power Speed - 1,500 rpm -

Operating Specifications

Operating Weight - Standard 543772 lb 116362 lb -
Bucket Capacity Range 17.2-43.6 m3 (22.3-57 yd3) 4.7-13 m3 (6.2-17 yd3) -
Operating Weight - High Lift 547675 lb 119618 lb -
Rated Payload - Standard Lift (Low to Moderate Digging Resistance) 60 ton (US) - -
Rated Payload - Standard Lift (Moderate to High Digging Resistance) 50 ton (US) - -
Rated Payload - High Lift (Low to Moderate Digging Resistance) 55 ton (US) - -
Rated Payload - High Lift (Moderate to High Digging Resistance) 50 ton (US) - -
Note *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
Cat Truck Match - Standard 785/789 - -
Cat Truck Match - High Lift 789/793/794 - -
Operating Weight - 116362 lb -
Rated Payload - Standard (Quarry Face) - 12.5 ton (US) -
Rated Payload - Loose Material (Standard) - 16 ton (US) -

Complete System Fill

Fuel Tank - Standard 856 gal (US) - -
Fuel Tank - With 24 hr Attachment 1414 gal (US) - -
Cooling System 138 gal (US) - -
Engine Crankcase 76 gal (US) - -
Transmission 110 gal (US) - -
Differential - Final Drives - Front 220 gal (US) - -
Differential - Final Drives - Rear 200 gal (US) - -
Hydraulic Tank - Implement and Hydraulic Fan 270 gal (US) - -
Hydraulic Tank - Steering and Braking 100 gal (US) - -
Oil Renewal System (ORS)* 20 gal (US) - -
Note *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

Axles

Front Fixed Fixed -
Rear Trunnion Trunnion -
Oscillation Angle 13° -

Cooling System

Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) 131 °F - -
Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) 127.4 °F - -

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 74 dB(A) - -
Machine Sound Level (ISO 6395:2008) 119 dB(A) - -
Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 73 dB(A) - -
Machine Sound Level (ISO 6395:2008) 117 dB(A) - -
Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

Hydraulic System - Steering

Steering System - Circuit Pilot, Load Sensing Pilot, load sensing -
Steering System - Pump Piston, Variable Displacement Piston, variable displacement -
Total Steering Angle 80 degrees 86° -
Steering Cycle Times - Low Idle 7.6 s 5.6 s -
Steering Cycle Times - High Idle 4.3 s 3.4 s -
Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min -
Steering Cut Off Pressure - 4351 psi -

Dimensions - Standard Lift - Approximate

B-Pin Height - Maximum Lift 28.8 ft - -
Clearance at Maximum Lift 19.8 ft - -
Dump Angle at Maximum Lift –50.0 degrees - -
Front Axle Centerline to Bucket Tip 21.9 ft - -
Ground to Bumper Clearance 4.4 ft - -
Ground to Center of Axles 6 ft - -
Ground to Lower Hitch Clearance 2.9 ft - -
Ground to Top of Exhaust Stacks 23.2 ft - -
Ground to Top of Hood 18.6 ft - -
Ground to Top of ROPS 23.4 ft - -
Maximum Overall Height - Bucket Raised 39.3 ft - -
Maximum Overall Length 64.6 ft - -
Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
Rack Angle at Maximum Lift 59.5 degrees - -
Rack Back Angle - Carry 47.7 degrees - -
Rack Back Angle - Ground Level 39.7 degrees - -
Reach - Maximum Lift 9.6 ft - -
Rear Axle - Centerline to Bumper 20.4 ft - -
Tread Width 14.1 ft - -
Wheel Base 22.3 ft - -
Width - Over Tires - With Bulge 18.8 ft - -

Dimensions - High Lift - Approximate

B-Pin Height - Maximum Lift 31.6 ft - -
Clearance at Maximum Lift 22.6 ft - -
Dump Angle at Maximum Lift –50.0 degrees - -
Front Axle Centerline to Bucket Tip 24.2 ft - -
Ground to Bumper Clearance 4.4 ft - -
Ground to Center of Axles 6 ft - -
Ground to Lower Hitch Clearance 2.9 ft - -
Ground to Top of Exhaust Stacks 23.2 ft - -
Ground to Top of Hood 18.6 ft - -
Ground to Top of ROPS 23.4 ft - -
Maximum Overall Height - Bucket Raised 42.1 ft - -
Maximum Overall Length 66.9 ft - -
Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
Rack Angle at Maximum Lift 59.4 degrees - -
Rack Back Angle - Carry 53.5 degrees - -
Rack Back Angle - Ground Level 45 degrees - -
Reach - Maximum Lift 9.4 ft - -
Rear Axle - Centerline to Bumper 20.4 ft - -
Tread Width 14.1 ft - -
Wheel Base 22.3 ft - -
Width - Over Tires - With Bulge 18.8 ft - -

Transmission

Transmission Type Cat Planetary Power Shift Cat switched reluctance electric drive -
Forward - 1 4.6 mile/h - -
Forward - 2 8 mile/h - -
Forward - 3 13.6 mile/h - -
Reverse - 1 5 mile/h - -
Reverse - 2 8.8 mile/h - -
Reverse - 3 14.9 mile/h - -
Direct Drive - Forward 1 Lock-up disables - -
Direct Drive - Forward 2 8.7 mile/h - -
Direct Drive - Forward 3 15.2 mile/h - -
Direct Drive - Reverse 1 Lock-up disables - -
Direct Drive - Reverse 2 9.6 mile/h - -
Direct Drive - Reverse 3 16.8 mile/h - -
Note Travel speeds based on 58/85-57 tires. - -
Forward 1 (virtual) - 4.3 mile/h -
Forward 2 (virtual) - 7 mile/h -
Forward 3 (virtual) - 13.8 mile/h -
Forward 4 (virtual) - 20 mile/h -
Reverse 1 (virtual) - 4.3 mile/h -
Reverse 2 (virtual) - 7 mile/h -
Reverse 3 (virtual) - 17.5 mile/h -

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit Positive Flow Control EH-Positive Flow Control, Flow Sharing -
Lift/Tilt System - Pump Variable Displacement Piston Variable displacement piston -
Maximum Flow at 1,700 rpm Engine Speed 541 gal/min - -
Relief Valve Setting - Lift/Tilt 5004 psi 4757 psi -
Cylinders, Double Acting - Lift, Bore and Stroke 370 × 1713 mm (14.6 × 67.4 in) - -
Cylinders, Double Acting - Tilt, Bore and Stroke 310 × 1086 mm (12.2 × 42.8 in) - -
Pilot System Open Loop and Pressure Reducing - -
Maximum Flow at 1,400-1,600 rpm - 153 gal/min -
Lift Cylinder - Bore - 8.7 in -
Lift Cylinder - Stroke - 41.3 in -
Tilt Cylinder - Bore - 8.7 in -
Tilt Cylinder - Stroke - 27 in -

Hydraulic Cycle Times

Rack Back 4.9 s 4.5 s -
Raise 12.6 s 8 s -
Dump 3.1 s 2.2 s -
Lower Float Down 4.2 s 3.5 s -
Total Hydraulic Cycle Time - 18.2 s -

Brakes

Brakes ISO 3450:2011 ISO 3450:2011 -

Air Conditioning System

Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. -

Operator's Cab

ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards -

Service Refill Capacities

Fuel Tank - 147 gal (US) -
Cooling System - Jacket Water - 30 gal (US) -
Cooling Systems - Power Train - 8 gal (US) -
Engine Crankcase - 16 gal (US) -
Diesel Exhaust Fluid Tank - 8.7 gal (US) -
Transmission - 16 gal (US) -
Differential - Final Drives - Front - 49 gal (US) -
Differential - Final Drives - Rear - 49 gal (US) -
Hydraulic System - Implement/Steering - 126 gal (US) -
Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati -

Sound Performance - Tier 4 Final / Stage V - Standard

Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) -

Sound Performance - Tier 3 / Stage III - Standard

Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) -

Dimensions (Approximate) - Standard Lift

Ground to Top of ROPS - 13.8 ft -
Ground to Top of Exhaust Stacks - 14.8 ft -
Ground to Top of Hood - 10.9 ft -
Ground to Bumper Clearance - 3.1 ft -
Rear Axle - Centerline to Bumper - 10.5 ft -
Front Axle Centerline to Bucket Tip - 14 ft -
Wheel Base - 14.9 ft -
Maximum Overall Length - 39.3 ft -
Ground to Lower Hitch Clearance - 1.9 ft -
Ground to Center of Axles - 3.2 ft -
Clearance at Maximum Lift - 11.9 ft -
B-Pin Height - Maximum Lift - 18 ft -
Maximum Overall Height - Bucket Raised - 24.5 ft -
Reach - Maximum Lift - 6.5 ft -
Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

Dimensions (Approximate) - High Lift

Ground to Top of ROPS - 13.8 ft -
Ground to Top of Exhaust Stacks - 14.8 ft -
Ground to Top of Hood - 10.9 ft -
Ground to Bumper Clearance - 3.1 ft -
Rear Axle - Centerline to Bumper - 10.5 ft -
Front Axle Centerline to Bucket Tip - 15.3 ft -
Wheel Base - 14.9 ft -
Maximum Overall Length - 40.7 ft -
Ground to Lower Hitch Clearance - 1.9 ft -
Ground to Center of Axles - 3.2 ft -
Clearance at Maximum Lift - 13.3 ft -
B-Pin Height - Maximum Lift - 19.3 ft -
Maximum Overall Height - Bucket Raised - 25.8 ft -
Reach - Maximum Lift - 6.8 ft -
Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

Dimensions - Millyard Linkage

Ground to Top of ROPS - 13.8 ft -
Ground to Top of Exhaust Stacks - 13.8 ft -
Ground to Top of Hood - 10.9 ft -
Ground to Bumper Clearance - 3.1 ft -
Rear Axle - Centerline to Bumper - 10.5 ft -
Front Axle Centerline to Fork Tip - 16.5 ft -
Wheel Base - 14.9 ft -
Maximum Overall Length - 41.9 ft -
Ground to Lower Hitch Clearance - 1.9 ft -
Ground to Center of Front Axle - 3.2 ft -
Fork Height with Level Arms - 8.1 ft -
Fork Top Clamp Opening - 13.1 ft -
Fork Height at Maximum Lift - 17.2 ft -
Hinge Pin Height at Maximum Lift - 16.1 ft -
Dump Angle at Maximum Lift - -39.4 ° -

Buckets

Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) -

Sustainability

Recyclability - 96% -
Add a Similar Product: