CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    995 Wheel Loader
    View Product
    988 XE Wheel Loader
    View Product Remove
    986 Wheel Loader
    View Product Remove

    Engine
    Engine Model Cat® 3516E Cat® C18 ™ C15 Cat®
    Emissions U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
    Engine Power - ISO 14396 1847 HP - 449 HP
    Gross Power - SAE J1995 1870 HP - -
    Net Power - SAE J1349 - Standard Ambient 1739 HP - -
    Net Power - SAE J1349 - High Ambient 1696 HP - -
    Bore 6.7 in 5.7 in 5.4 in
    Stroke 8.5 in 7.2 in 6.75 in
    Displacement 4766 in³ 1105 in³ 927 in²
    Peak Torque - 1,200 rpm - SAE J1995 8549 lb/ft 2230 ft·lbf 1778 lb/ft
    Torque Rise 39% 58% 16%
    Note (1) The power ratings apply when tested under the reference conditions for the specified standard. - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. - -
    Note (3) The gross power advertised is with the fan at maximum speed. - -
    Net Power - SAE J1349 - 538 HP 373 HP
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1,700 rpm 2000
    Peak Power Speed - 1,500 rpm 1600
    Peak Power Speed - Gross - SAE J1995 - - 456 HP
    Rated Speed - 2,000 rpm - EEC 80/1269 - - 373 HP
    Rated Speed - 2,000 rpm - EEC 80/1269 (DIN) - - 378 HP
    Rated Speed - 2,000 rpm - ISO 9249 - - 373 HP
    Rated Speed - 2,000 rpm - ISO 9249 (DIN) - - 378 HP

    Operating Specifications
    Operating Weight - Standard 543772 lb 116362 lb 97785 lb
    Bucket Capacity Range 17.2-43.6 m3 (22.3-57 yd3) 4.7-13 m3 (6.2-17 yd3) 5-10,3 m³ (6,5-13,5 yd.³)
    Operating Weight - High Lift 547675 lb 119618 lb 104005 lb
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Note *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
    Cat Truck Match - Standard 785/789 - 770/735/740/745
    Cat Truck Match - High Lift 789/793/794 - 772/773
    Operating Weight - 116362 lb -
    Rated Payload - Standard (Quarry Face) - 12.5 ton (US) 11 ton (US)
    Rated Payload - Loose Material (Standard) - 16 ton (US) 14 ton (US)
    Rated Payload - High Lift (Quarry Face) - - 11 ton (US)
    Rated Payload - Loose Material (High Lift) - - 12.1 ton (US)

    Complete System Fill
    Fuel Tank - Standard 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment 1414 gal (US) - -
    Cooling System 138 gal (US) - -
    Engine Crankcase 76 gal (US) - -
    Transmission 110 gal (US) - -
    Differential - Final Drives - Front 220 gal (US) - -
    Differential - Final Drives - Rear 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan 270 gal (US) - -
    Hydraulic Tank - Steering and Braking 100 gal (US) - -
    Oil Renewal System (ORS)* 20 gal (US) - -
    Note *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Axles
    Front Fixed Fixed Fixed
    Rear Trunnion Trunnion Trunnion
    Oscillation Angle 9° 13° ±12.5°
    Oscillation Angle - Chain Arrangement - - ±8.5°

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 119 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 112 dB(A)

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 117 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c -
    • The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    • Hearing protection may be neede
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing Pilot, load sensing Load Sense
    Steering System - Pump Piston, Variable Displacement Piston, variable displacement Piston, variable displacement
    Total Steering Angle 80 degrees 86° 70°
    Steering Cycle Times - Low Idle 7.6 s 5.6 s -
    Steering Cycle Times - High Idle 4.3 s 3.4 s -
    Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min -
    Steering Cut Off Pressure - 4351 psi 4000 psi
    Maximum Flow at 1,400 rpm - - 52 gal/min

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift 28.8 ft - -
    Clearance at Maximum Lift 19.8 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 21.9 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 39.3 ft - -
    Maximum Overall Length 64.6 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.5 degrees - -
    Rack Back Angle - Carry 47.7 degrees - -
    Rack Back Angle - Ground Level 39.7 degrees - -
    Reach - Maximum Lift 9.6 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift 31.6 ft - -
    Clearance at Maximum Lift 22.6 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 24.2 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 42.1 ft - -
    Maximum Overall Length 66.9 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.4 degrees - -
    Rack Back Angle - Carry 53.5 degrees - -
    Rack Back Angle - Ground Level 45 degrees - -
    Reach - Maximum Lift 9.4 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Transmission
    Transmission Type Cat Planetary Power Shift Cat switched reluctance electric drive Cat planetary power shift
    Forward - 1 4.6 mile/h - 5 mile/h
    Forward - 2 8 mile/h - 8 mile/h
    Forward - 3 13.6 mile/h - -
    Reverse - 1 5 mile/h - 5 mile/h
    Reverse - 2 8.8 mile/h - 8 mile/h
    Reverse - 3 14.9 mile/h - -
    Direct Drive - Forward 1 Lock-up disables - -
    Direct Drive - Forward 2 8.7 mile/h - 8 mile/h
    Direct Drive - Forward 3 15.2 mile/h - 14 mile/h
    Direct Drive - Reverse 1 Lock-up disables - -
    Direct Drive - Reverse 2 9.6 mile/h - 9 mile/h
    Direct Drive - Reverse 3 16.8 mile/h - 16 mile/h
    Note Travel speeds based on 58/85-57 tires. - -
    Forward 1 (virtual) - 4.3 mile/h -
    Forward 2 (virtual) - 7 mile/h -
    Forward 3 (virtual) - 13.8 mile/h -
    Forward 4 (virtual) - 20 mile/h -
    Reverse 1 (virtual) - 4.3 mile/h -
    Reverse 2 (virtual) - 7 mile/h -
    Reverse 3 (virtual) - 17.5 mile/h -
    Direct Drive - Forward 4 - - 24 mile/h
    Direct Drive - Reverse 4 - - 25.4 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control EH-Positive Flow Control, Flow Sharing Load Sense
    Lift/Tilt System - Pump Variable Displacement Piston Variable displacement piston 2 × 110 cc variable displacement
    Maximum Flow at 1,700 rpm Engine Speed 541 gal/min - -
    Relief Valve Setting - Lift/Tilt 5004 psi 4757 psi 4050 psi
    Cylinders, Double Acting - Lift, Bore and Stroke 370 × 1713 mm (14.6 × 67.4 in) - -
    Cylinders, Double Acting - Tilt, Bore and Stroke 310 × 1086 mm (12.2 × 42.8 in) - -
    Pilot System Open Loop and Pressure Reducing - -
    Maximum Flow at 1,400-1,600 rpm - 153 gal/min -
    Lift Cylinder - Bore - 8.7 in 7.5 in
    Lift Cylinder - Stroke - 41.3 in 45 in
    Tilt Cylinder - Bore - 8.7 in 6.7 in
    Tilt Cylinder - Stroke - 27 in 28.4 in
    Maximum Flow at 2,165 rpm - - 123 gal/min

    Hydraulic Cycle Times
    Rack Back 4.9 s 4.5 s 4.5 s
    Raise 12.6 s 8 s 9 s
    Dump 3.1 s 2.2 s 3.5 s
    Lower Float Down 4.2 s 3.5 s 4.3 s
    Total Hydraulic Cycle Time - 18.2 s 21.3 s
    Lower - - 5.2 s

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 ISO 3450:2011

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)

    Service Refill Capacities
    Fuel Tank - 147 gal (US) 141 gal (US)
    Cooling System - Jacket Water - 30 gal (US) -
    Cooling Systems - Power Train - 8 gal (US) -
    Engine Crankcase - 16 gal (US) -
    Diesel Exhaust Fluid Tank - 8.7 gal (US) 6 gal (US)
    Transmission - 16 gal (US) 20 gal (US)
    Differential - Final Drives - Front - 49 gal (US) -
    Differential - Final Drives - Rear - 49 gal (US) -
    Hydraulic System - Implement/Steering - 126 gal (US) -
    Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati -
    Fuel Tank - Short Lift - - 127 gal (US)
    Cooling Systems - - 26 gal (US)
    Crankcase - - 9 gal (US)
    Axle Oil - Differentials and Final Drives - Front - - 49 gal (US)
    Axle Oil - Differentials and Final Drives - Rear - - 45 gal (US)
    Hydraulic System Factory Fill - - 87 gal (US)
    Hydraulic System - Tank Only - - 34 gal (US)

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) -

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 15.3 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 40.7 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 13.3 ft -
    B-Pin Height - Maximum Lift - 19.3 ft -
    Maximum Overall Height - Bucket Raised - 25.8 ft -
    Reach - Maximum Lift - 6.8 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 13.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Fork Tip - 16.5 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 41.9 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Fork Height with Level Arms - 8.1 ft -
    Fork Top Clamp Opening - 13.1 ft -
    Fork Height at Maximum Lift - 17.2 ft -
    Hinge Pin Height at Maximum Lift - 16.1 ft -
    Dump Angle at Maximum Lift - -39.4 ° -

    Buckets
    Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) -

    Sustainability
    Recyclability - 96% -

    Dimensions (Approximate) - Standard Lift Linkage
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Front Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach - Maximum Lift - - 7.1 ft
    Clearance at Maximum Lift - - 10.1 ft
    B-Pin Height - Maximum Lift - - 16.1 ft
    Maximum Overall Height - Bucket Raised - - 22.4 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 36.6 ft
    Front Axle Centerline to Bucket Tip - - 13.8 ft
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

    Dimensions (Approximate) - High Lift Linkage
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Front Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach - Maximum Lift - - 7.4 ft
    Clearance at Maximum Lift - - 11.6 ft
    B-Pin Height - Maximum Lift - - 17.6 ft
    Maximum Overall Height - Bucket Raised - - 23.9 ft
    Rear Axle - Centerline to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 38 ft
    Front Axle Centerline to Bucket Tip - - 15.3 ft
    Note - -
    • All dimensions are approximate.
    • Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.

    Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Rear Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    Reach at Maximum Lift - - 8 ft
    Clearance at Maximum Lift - - 10.7 ft
    B-Pin Height at Maximum Lift - - 15 ft
    Maximum Overall Height, Bucket Raised - - 20.9 ft
    Rear Axle Center Line to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 35 ft
    Front Axle Centerline to Bucket Tip - - 12.2 ft

    Dimensions (Approximate) - Quick Coupler and Fork
    Ground to Top of ROPS - - 13.5 ft
    Ground to Top of Exhaust Stacks - - 13.3 ft
    Ground to Top of Hood - - 10.7 ft
    Ground to Center of Rear Axle - - 3.2 ft
    Ground to Fuel Tank Clearance - - 2.3 ft
    Ground to Lower Hitch Clearance - - 1.5 ft
    B-Pin Height at Maximum Lift - - 15 ft
    Rear Axle Center Line to Bumper - - 10.3 ft
    Wheel Base - - 12.5 ft
    Maximum Overall Length - - 35.4 ft
    Front Axle Centerline to Bucket Tip - - 12.6 ft
    Add a Similar Product: