CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    995 Wheel Loader
    View Product
    988 XE Wheel Loader
    View Product Remove
    988 GC Wheel Loader
    View Product Remove

    Engine
    Engine Model Cat® 3516E Cat® C18 ™ Cat® C15
    Emissions U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014
    Engine Power - ISO 14396 1847 HP - 449 HP
    Gross Power - SAE J1995 1870 HP - 456 HP
    Net Power - SAE J1349 - Standard Ambient 1739 HP - -
    Net Power - SAE J1349 - High Ambient 1696 HP - -
    Bore 6.7 in 5.7 in 5.4 in
    Stroke 8.5 in 7.2 in 6.75 in
    Displacement 4766 in³ 1105 in³ 927 in³
    Peak Torque - 1,200 rpm - SAE J1995 8549 lb/ft 2230 ft·lbf 1778 ft·lbf
    Torque Rise 39% 58% 16%
    Note (1) The power ratings apply when tested under the reference conditions for the specified standard. - -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler. - -
    Note (3) The gross power advertised is with the fan at maximum speed. - -
    Net Power - SAE J1349 - 538 HP 373 HP
    Engine Power - ISO 14396:2002 - 580 HP -
    Gross Power - SAE J1995:2014 - 588 HP -
    Rated Speed - 1,700 rpm 2000
    Peak Power Speed - 1,500 rpm 1600

    Operating Specifications
    Operating Weight - Standard 543772 lb 116362 lb -
    Bucket Capacity Range 17.2-43.6 m3 (22.3-57 yd3) 4.7-13 m3 (6.2-17 yd3) 6.4-7.6 m3 (8.3-10 yd3)
    Operating Weight - High Lift 547675 lb 119618 lb -
    Rated Payload - Standard Lift (Low to Moderate Digging Resistance) 60 ton (US) - -
    Rated Payload - Standard Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Rated Payload - High Lift (Low to Moderate Digging Resistance) 55 ton (US) - -
    Rated Payload - High Lift (Moderate to High Digging Resistance) 50 ton (US) - -
    Note *Please contact your local dealer to determine if your application is suitable for this increased rated payload. - -
    Cat Truck Match - Standard 785/789 - -
    Cat Truck Match - High Lift 789/793/794 - 772/773/775
    Operating Weight - 116362 lb 116858 lb
    Rated Payload - Standard (Quarry Face) - 12.5 ton (US) -
    Rated Payload - Loose Material (Standard) - 16 ton (US) -
    Rated Payload - Quarry Face - - 12.5 ton (US)

    Complete System Fill
    Fuel Tank - Standard 856 gal (US) - -
    Fuel Tank - With 24 hr Attachment 1414 gal (US) - -
    Cooling System 138 gal (US) - -
    Engine Crankcase 76 gal (US) - -
    Transmission 110 gal (US) - -
    Differential - Final Drives - Front 220 gal (US) - -
    Differential - Final Drives - Rear 200 gal (US) - -
    Hydraulic Tank - Implement and Hydraulic Fan 270 gal (US) - -
    Hydraulic Tank - Steering and Braking 100 gal (US) - -
    Oil Renewal System (ORS)* 20 gal (US) - -
    Note *Not available on Tier 4 Final/Stage V machines. Not available in all regions. - -

    Axles
    Front Fixed Fixed Fixed
    Rear Trunnion Trunnion Trunnion
    Oscillation Angle 9° 13° +/-12.5°

    Cooling System
    Ambient Capability Hydraulically Driven Demand Fan - Standard 109.4 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) 131 °F - -
    Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) 127.4 °F - -

    Sound Performance - Standard
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 74 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 119 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Sound Performance - Suppression
    Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent 73 dB(A) - -
    Machine Sound Level (ISO 6395:2008) 117 dB(A) - -
    Note The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was c - -

    Hydraulic System - Steering
    Steering System - Circuit Pilot, Load Sensing Pilot, load sensing Pilot, load sensing
    Steering System - Pump Piston, Variable Displacement Piston, variable displacement Piston, variable displacement
    Total Steering Angle 80 degrees 86° 70°
    Steering Cycle Times - Low Idle 7.6 s 5.6 s 5.2 s
    Steering Cycle Times - High Idle 4.3 s 3.4 s 3 s
    Maximum Flow at 1,400-1,600 rpm - 71.3 gal/min -
    Steering Cut Off Pressure - 4351 psi -
    Maximum Flow - - 52 gal (US)
    Relief Valve Setting - Steering - - 4000 psi

    Dimensions - Standard Lift - Approximate
    B-Pin Height - Maximum Lift 28.8 ft - -
    Clearance at Maximum Lift 19.8 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 21.9 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 39.3 ft - -
    Maximum Overall Length 64.6 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.5 degrees - -
    Rack Back Angle - Carry 47.7 degrees - -
    Rack Back Angle - Ground Level 39.7 degrees - -
    Reach - Maximum Lift 9.6 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Dimensions - High Lift - Approximate
    B-Pin Height - Maximum Lift 31.6 ft - -
    Clearance at Maximum Lift 22.6 ft - -
    Dump Angle at Maximum Lift –50.0 degrees - -
    Front Axle Centerline to Bucket Tip 24.2 ft - -
    Ground to Bumper Clearance 4.4 ft - -
    Ground to Center of Axles 6 ft - -
    Ground to Lower Hitch Clearance 2.9 ft - -
    Ground to Top of Exhaust Stacks 23.2 ft - -
    Ground to Top of Hood 18.6 ft - -
    Ground to Top of ROPS 23.4 ft - -
    Maximum Overall Height - Bucket Raised 42.1 ft - -
    Maximum Overall Length 66.9 ft - -
    Note Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips. - -
    Rack Angle at Maximum Lift 59.4 degrees - -
    Rack Back Angle - Carry 53.5 degrees - -
    Rack Back Angle - Ground Level 45 degrees - -
    Reach - Maximum Lift 9.4 ft - -
    Rear Axle - Centerline to Bumper 20.4 ft - -
    Tread Width 14.1 ft - -
    Wheel Base 22.3 ft - -
    Width - Over Tires - With Bulge 18.8 ft - -

    Transmission
    Transmission Type Cat Planetary Power Shift Cat switched reluctance electric drive Cat planetary power shift
    Forward - 1 4.6 mile/h - 5 mile/h
    Forward - 2 8 mile/h - 8 mile/h
    Forward - 3 13.6 mile/h - -
    Reverse - 1 5 mile/h - 5 mile/h
    Reverse - 2 8.8 mile/h - 8 mile/h
    Reverse - 3 14.9 mile/h - -
    Direct Drive - Forward 1 Lock-up disables - Lock-up disabled
    Direct Drive - Forward 2 8.7 mile/h - 8 mile/h
    Direct Drive - Forward 3 15.2 mile/h - 14 mile/h
    Direct Drive - Reverse 1 Lock-up disables - Lock-up disabled
    Direct Drive - Reverse 2 9.6 mile/h - 9 mile/h
    Direct Drive - Reverse 3 16.8 mile/h - 16 mile/h
    Note Travel speeds based on 58/85-57 tires. - -
    Forward 1 (virtual) - 4.3 mile/h -
    Forward 2 (virtual) - 7 mile/h -
    Forward 3 (virtual) - 13.8 mile/h -
    Forward 4 (virtual) - 20 mile/h -
    Reverse 1 (virtual) - 4.3 mile/h -
    Reverse 2 (virtual) - 7 mile/h -
    Reverse 3 (virtual) - 17.5 mile/h -
    Direct Drive - Forward 4 - - 24 mile/h
    Direct Drive - Reverse 4 - - 25.4 mile/h

    Hydraulic System - Lift/Tilt
    Lift/Tilt System - Circuit Positive Flow Control EH-Positive Flow Control, Flow Sharing EH - Load Sense
    Lift/Tilt System - Pump Variable Displacement Piston Variable displacement piston -
    Maximum Flow at 1,700 rpm Engine Speed 541 gal/min - -
    Relief Valve Setting - Lift/Tilt 5004 psi 4757 psi 4598 psi
    Cylinders, Double Acting - Lift, Bore and Stroke 370 × 1713 mm (14.6 × 67.4 in) - 190 mm x 1216 mm (7.5 in x 48 in)
    Cylinders, Double Acting - Tilt, Bore and Stroke 310 × 1086 mm (12.2 × 42.8 in) - 170 mm x 722 mm (6.7 in x 28.4 in)
    Pilot System Open Loop and Pressure Reducing - Variable displacement piston
    Maximum Flow at 1,400-1,600 rpm - 153 gal/min -
    Lift Cylinder - Bore - 8.7 in -
    Lift Cylinder - Stroke - 41.3 in -
    Tilt Cylinder - Bore - 8.7 in -
    Tilt Cylinder - Stroke - 27 in 27 in
    Lift/Tilt System - - 2X x 145 cc Variable displacement piston
    Maximum Flow at 2,165 rpm - - 159 gal/min

    Hydraulic Cycle Times
    Rack Back 4.9 s 4.5 s 3.8 s
    Raise 12.6 s 8 s 7.5 s
    Dump 3.1 s 2.2 s 3 s
    Lower Float Down 4.2 s 3.5 s 4.6 s
    Total Hydraulic Cycle Time - 18.2 s -
    Total Hydraulic Cycle Time - Empty Bucket - - 18.9 s

    Brakes
    Brakes ISO 3450:2011 ISO 3450:2011 ISO 3450:2011

    Air Conditioning System
    Air Conditioning - The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

    Operator's Cab
    ROPS/FOPS - ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards

    Service Refill Capacities
    Fuel Tank - 147 gal (US) 141 gal (US)
    Cooling System - Jacket Water - 30 gal (US) -
    Cooling Systems - Power Train - 8 gal (US) -
    Engine Crankcase - 16 gal (US) 9 gal (US)
    Diesel Exhaust Fluid Tank - 8.7 gal (US) 5.5 gal (US)
    Transmission - 16 gal (US) 20 gal (US)
    Differential - Final Drives - Front - 49 gal (US) 49 gal (US)
    Differential - Final Drives - Rear - 49 gal (US) 45 gal (US)
    Hydraulic System - Implement/Steering - 126 gal (US) -
    Note - All nonroad Tier 4 Final/Stage V diesel engines are required to use: – The machine has the flexibility to run on either ultra-low-sulfur diesel fuel (ULSD with 15 ppm of sulfur or less). – Cat engines are compatible with the following renewable, alternati Cat U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: - 20% biodiesel FAME (fatty a
    Cooling System - - 27 gal (US)

    Sound Performance - Tier 4 Final / Stage V - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 109 dB(A) -

    Sound Performance - Tier 3 / Stage III - Standard
    Operator Sound Pressure Level (ISO 6396:2008) - 72 dB(A) -
    Machine Sound Power Level (ISO 6395:2008) - 110 dB(A) -

    Dimensions (Approximate) - Standard Lift
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 14.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Bucket Tip - 14 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 39.3 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 11.9 ft -
    B-Pin Height - Maximum Lift - 18 ft -
    Maximum Overall Height - Bucket Raised - 24.5 ft -
    Reach - Maximum Lift - 6.5 ft -
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. -

    Dimensions (Approximate) - High Lift
    Ground to Top of ROPS - 13.8 ft 13.5 ft
    Ground to Top of Exhaust Stacks - 14.8 ft 13.3 ft
    Ground to Top of Hood - 10.9 ft 10.7 ft
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft 10.3 ft
    Front Axle Centerline to Bucket Tip - 15.3 ft 15.7 ft
    Wheel Base - 14.9 ft 12.5 ft
    Maximum Overall Length - 40.7 ft 39.5 ft
    Ground to Lower Hitch Clearance - 1.9 ft 1.5 ft
    Ground to Center of Axles - 3.2 ft -
    Clearance at Maximum Lift - 13.3 ft 12 ft
    B-Pin Height - Maximum Lift - 19.3 ft 18.7 ft
    Maximum Overall Height - Bucket Raised - 25.8 ft 25 ft
    Reach - Maximum Lift - 6.8 ft 7.7 ft
    Note - Specs are calculated with 6.9 m3 (9.0 yd3) rock bucket and Michelin XLDD2 with 978 mm (3.2 ft) centerline of rear axle height. Specifications are calculated with 6.9 m3 (9.0 yd3 ) rock bucket equipped with Michelin XLDD1 35/65 R33 tires.

    Dimensions - Millyard Linkage
    Ground to Top of ROPS - 13.8 ft -
    Ground to Top of Exhaust Stacks - 13.8 ft -
    Ground to Top of Hood - 10.9 ft -
    Ground to Bumper Clearance - 3.1 ft -
    Rear Axle - Centerline to Bumper - 10.5 ft -
    Front Axle Centerline to Fork Tip - 16.5 ft -
    Wheel Base - 14.9 ft -
    Maximum Overall Length - 41.9 ft -
    Ground to Lower Hitch Clearance - 1.9 ft -
    Ground to Center of Front Axle - 3.2 ft -
    Fork Height with Level Arms - 8.1 ft -
    Fork Top Clamp Opening - 13.1 ft -
    Fork Height at Maximum Lift - 17.2 ft -
    Hinge Pin Height at Maximum Lift - 16.1 ft -
    Dump Angle at Maximum Lift - -39.4 ° -

    Buckets
    Bucket Capacities - 4.7-13 m3 (6.2-17 yd3) 6.4-7.6 m3 (8.3-10 yd3)

    Sustainability
    Recyclability - 96% 96%

    Sound Performance - Tier 4 Final/EU Stage V - Standard
    Operator Sound Level (ISO 6396) - - 72 dB(A)
    Machine Sound Level (ISO 6395) - - 110 dB(A)
    Note (1) - - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    Note (2) - - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
    Note (3) - - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
    Add a Similar Product: