Cat® C7.1 Diesel Engine
Product description
The Cat® C7.1 Industrial Diesel Engine is offered in ratings ranging from 112-162 bkW (150-220 bhp) @ 1950-2200 rpm. These ratings meet China Stage II, U.S. EPA Tier 2 equivalent, and EU Stage II equivalent emission standards. Industries and applications powered by C7.1 engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers and Underground Mining Equipment.
Power Rating
- Maximum Power - 217HP
- Maximum Torque - 663lb-ft @ 1400 rpm
- Rated Speed - 1950-2200 rpm
- Minimum Power - 150HP
Emission Standards
- Emissions - China Nonroad Stage III, UN ECE R96 Stage IIIA
Engine Dimensions - Approximate
- Length - 44.9in
- Width - 28.4in
- Height - 32.3in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 1118lb
General
- Engine Configuration - Inline 6, 4-Stroke-Cycle
- Bore - 4.1in
- Stroke - 5.3in
- Displacement - 427.7in³
- Compression Ratio - 18.2:1
- Aspiration - Turbocharged Aftercooled (TA)
- Combustion System - Direct Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - -
Standard Equipment:
-
- Air Inlet
-
- Standard air cleaners
-
- Cooling System
-
- Top tank temperature 108°C (226°F) as standard to minimize cooling pack size, 50:50 water glycol mix, detailed guidance on cooling system design and validation available to ensure machine reliability
-
- Exhaust System
-
- Diesel particulate filter and regeneration system supplied, with a range of inlet and outlet options
-
- Flywheels And Flywheel Housing
-
- Wide choice of drivetrain interfaces, including SAE1, SAE2 or SAE3 configurations
-
- Lube System
-
- Wide choice of sumps for different applications
-
- Power Take Off
-
- SAE A or SAE B flanges on left-hand side. Right- hand side twin PTO also available. Engine power can also be taken from the front of the engine on some applications, factory fitted compressors are also available.
-
- General
-
- Paint: Caterpillar yellow, with optional colors available at request
