Cat® C27 Industrial Diesel Engine
Product description
The Cat® C27 Industrial Diesel Engine is offered in ratings ranging from 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm. These ratings meet U.S. EPA Tier 2 equivalent emission standards. Industries and applications powered by these high powered engines include Bore/Drill Rigs, Chippers/Grinders, Construction, Cranes, Dredgers, Forestry, Hydraulic Power Units, Irrigation Equipment, Material Handling, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Power Rating
- Maximum Power - 1150HP
- Maximum Torque - 3876lb-ft @ 1400 rpm
- Rated Speed - 1800-2100 rpm
- Minimum Power - 800HP
Emission Standards
- Emissions - U.S. EPA Tier 2 Equivalent
Engine Dimensions - Approximate
- Length - 75.5in
- Width - 57.6in
- Height - 51.9in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 6495lb
General
- Engine Configuration - V-12, 4-Stroke-Cycle Diesel
- Bore - 5.4in
- Stroke - 6in
- Displacement - 1649.5in³
- Compression Ratio - 16.5:1
- Aspiration - Turbocharged Aftercooled (TA)
- Combustion System - Direct Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - -
Standard Equipment:
-
- Air Inlet System
-
- Twin Turbocharged Aftercooled
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request