Cat® C27 Diesel Engine
Product description
The Cat® C27 Industrial Diesel Engine is offered in ratings ranging from 597-783 bkW (800-1050 bhp) @ 1800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards.
Power Rating
- Maximum Power - 1050HP
- Maximum Torque - 3448lb-ft @ 1200 rpm
- Rated Speed - 1800 rpm
- Minimum Power - 800HP
Emission Standards
- Emissions - U.S. EPA Tier 4 Final
General
- Engine Configuration - V-12
- Bore - 5.4in
- Stroke - 6in
- Displacement - 1649.5in³
- Compression Ratio - 16.0:1
- Aspiration - Twin Turbocharged-Aftercooled (TTA)
- Combustion System - Direct Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - DOC
Engine Dimensions - Approximate
- Length - 73.8in
- Width - 63in
- Height - 53.9in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 6625lb
Standard Equipment:
-
- Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic control system
- Over-foam wiring harness
- Automatic altitude compensation
- Power compensated for fuel temperature
- Configurable software features
- Engine monitoring system SAE J1939 broadcast and control
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- Choice of SAE No. 0 or SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel transfer pump
- Electronic fuel priming
-
- Lube System
-
- Open crankcase ventilation system
- Oil cooler
- Oil filler
- Lube oil filter
- Rear sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes