Cat® C2.8 Diesel Engine
Product description
The Cat® C2.8 Industrial Diesel Engines offer the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 55 bkW (74 bhp) @ 2500 rpm. The C2.8 is designed to meet the needs of many industries and applications, including agricultural tractors, aerial lifts, aircraft ground support, bore/drill rigs, chippers/grinders, compactors/rollers, compressors, forestry, irrigation equipment, material handling, mining, earthmoving equipment, paving equipment, pumps, fruit harvesters equipment, turf and underground mining equipment.
Power Rating
- Maximum Power - 74HP
- Maximum Torque - 280lb-ft @ 1360 rpm
- Rated Speed - 2200 - 2400 rpm
- Minimum Power - 67HP
Emission Standards
- Emissions - U.S. EPA & CARB Tier 4 Final, EU Stage V
General
- Engine Configuration - In-Line 4
- Bore - 3.5in
- Stroke - 4.3in
- Displacement - 171in³
- Compression Ratio - 17.0:1
- Aspiration - Turbocharged (T) and Turbocharged-Aftercooled (TA)
- Combustion System - Direct Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - DOC+DPF
Engine Dimensions - Approximate
- Length - 24.9in
- Width - 22.4in
- Height - 30.9in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 750lb
Standard Equipment:
-
- Air Inlet System
-
- Induction manifolds
- Exhaust manifolds
- Engine-mounted aftertreatment
-
- Control System
-
- Starter motor (12V)
- Alternator (12V)
- Electronic Control Unit (chassis mounted)
- Engine control sensors and robust wiring harness
- Data interface via CANbus J1939
-
- Flywheels And Flywheel Housing
-
- Flywheel housings – SAE 3 or SAE 4
- Choice of flywheel to match industry common hydraulic pumps and transmissions
- Side PTO with SAE A or SAE B interface
-
- Fuel System
-
- Fuel filter – preconnected but chassis mounted
- With water sensor
-
- Lube System
-
- Lubricating oil filters
- High incline oil pan – 35° continuous in all directions
-
- General
-
- Cold start capability to -20° C (-4° F) with standard equipment
- Paint: Caterpillar yellow, with optional colors available at request
-
- U.s. Epa Tier 4 Final, Proposed Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
-
- Diesel Oxidation Catalyst (DOC) (Tier 4 Final and Stage V)
- Diesel Particulate Filter (DPF) (Stage V)
