Cat® C15 Industrial Diesel Engine
Product description
The Cat® C15 Industrial Diesel Engine is offered in ratings ranging from 328-444 bkW (440-595 bhp) @ 1800-2100 rpm. These ratings meet China Stage II, U.S. EPA Tier 3 equivalent, and EU Stage IIIA equivalent emission standards. Industries and applications powered by C15 engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.
Power Rating
- Maximum Power - 595HP
- Maximum Torque - 2004lb-ft @ 1400 rpm
- Rated Speed - 1800-2100 rpm
- Minimum Power - 440HP
Emission Standards
- Emissions - China Nonroad III, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent
Engine Dimensions - Approximate
- Length - 54.2in
- Width - 36.2in
- Height - 48.3in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 3239lb
General
- Engine Configuration - Inline 6, 4-Stroke-Cycle Diesel
- Bore - 5.4in
- Stroke - 6.8in
- Displacement - 927.6in³
- Compression Ratio - 18.0:1
- Aspiration - Turbocharged Aftercooled (TA)
- Combustion System - Direct Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - -
Standard Equipment:
-
- Air Inlet System
-
- Turbocharged
- Air-to-Air Aftercooled
-
- Control System
-
- Electronic governing, PTO speed control
- Programmable ratings
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and total engine limit
- Electronic diagnostics and fault logging
- Engine monitoring system SAE J1939 broadcast and control
- ADEM™ A4 Electronic Control Unit (ECU)
-
- Cooling System
-
- Thermostats and housing, vertical outlet
- Jacket water pump, centrifugal
- Water pump, inlet
-
- Exhaust System
-
- Exhaust manifold, dry
- Optional exhaust outlet
-
- Flywheels And Flywheel Housing
-
- SAE No. 1 flywheel housing
-
- Fuel System
-
- MEUI injection
- Fuel filter, secondary (2 micron)
- Fuel filter, tertiary (2 micron)
- ACERT™ Technology
- Fuel transfer pump
- Fuel priming pump
-
- Lube System
-
- Crankcase breather
- Oil cooler
- Oil filler
- Lube oil filter
- Front sump oil pan
- Oil dipstick
- Gear driven oil pump
-
- General
-
- Vibration damper
- Lifting eyes
- Cold start capability to -20° C (-4° F)
- Paint: Caterpillar yellow, with optional colors available at request
