Industrial Power Systems

Cat® C13 Industrial Power Unit

Product description

The Cat® C13 IPU configuration not only provides the flexibility and options found on a standard industrial engine, but also comes fitted with air filter and mounting, an integrated cooling system with air and coolant lines, and full wire harnessing with an engine-mounted ECM. Meeting Brazil MAR-1 and UN R96 Stage IIIA emission standards and UN R120 performance standards for measurement of net power and specific fuel consumption, the IPU allows for easier and faster installation, allowing the customer to spend less time worrying about integration and more time doing the work that matters.

Power Rating
  • Maximum Power - 536HP
  • Rated Speed - 1800-2100
  • Minimum Power - 385HP
Emission Standards
  • Emissions - Brazil MAR-1, UN R96 Stage IIIA, U.S. EPA Tier 3
General
  • Engine Configuration - Inline 6, 4-Stroke-Cycle Diesel
  • Bore - 5.1in
  • Stroke - 6.2in
  • Displacement - 763in³
  • Compression Ratio - 17.0:1
  • Aspiration - Turbocharged Aftercooled (TA)
  • Rotation from Flywheel End - Counterclockwise
  • Aftertreatment - -
Power Unit Dimensions
  • Length - 92in
  • Width - 50in
  • Height - 71in
  • Weight - 3730lb
Standard Equipment:
  • Air Inlet System
    • Turbocharged
    • Air-to-Air Aftercooled
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Automatic altitude compensation
    • Power compensation for fuel temperature
    • Programmable low and high idle and total engine limit
    • Electronic diagnostics and fault logging
    • Engine monitoring system SAE J1939 broadcast and control
    • ADEM A4 Electronic Control Unit (ECU)
  • Cooling System
    • Thermostats and housing, vertical outlet
    • Jacket water pump, centrifugal
    • Water pump, inlet
  • Exhaust System
    • Exhaust manifold, dry
    • Optional exhaust outlet
  • Flywheels And Flywheel Housing
    • SAE No. 1 flywheel housing
  • Fuel System
    • MEUI injection
    • Fuel filter, secondary (2 micron)
    • ACERT Technology
    • Fuel transfer pump
    • Fuel priming pump
  • Lube System
    • Crankcase breather
    • Oil cooler
    • Oil filler
    • Lube oil filter
    • Front sump oil pan
    • Oil dipstick
    • Gear driven oil pump
  • General
    • Vibration damper
    • Lifting eyes
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request
Compare Products