Cat® C0.5 Diesel Engine
Product description
The C0.5 Industrial Diesel Engine is offered in ratings ranging from 8.2-10.2 bkW (11.0-13.7 bhp) @ 2800-3600 rpm. These ratings are available for Europe and, depending on applicable emission standards, may be introduced in other regulated and non-regulated areas. Industries and applications powered by C0.5 engines include Auxiliary Power Units, Compactors/Rollers, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.
Power Rating
- Maximum Power - 13.7HP
- Maximum Torque - 22lb-ft @ 2600 rpm
- Rated Speed - 2800-3600 rpm
- Minimum Power - 11HP
Emission Standards
- Emissions - U.S. EPA Tier 4 Interim Equivalent
Engine Dimensions - Approximate
- Length - 16in
- Width - 14.6in
- Height - 20.6in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 126lb
General
- Engine Configuration - Inline 2, 4-Stroke-Cycle Diesel
- Bore - 2.6in
- Stroke - 2.8in
- Displacement - 31in³
- Compression Ratio - 23.5:1
- Aspiration - Naturally Aspirated (NA)
- Combustion System - Indirect Injection
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - -
Standard Equipment:
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
- Flywheel And Flywheel Housing
-
- SAE No. 6 1/2 flywheel
- Choice of SAE No. 5 or standard backplate flywheel housing
-
- Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request