Cat® 3516E Diesel Engine
Product description
The Cat® 3516E industrial diesel engine is offered at a continuous rating of 1566 kW (2100 hp) @ 1650 rpm and is designed for applications that require continuous heavy-duty service. These engines are capable of being operated at maximum power and speed up to 100% of the time without interuption or load cycling.
The 3516E is certified to meet EU Stage V, U.S. EPA Tier 4 Final, and California Air Regulations Board (CARB) standards, providing a single solution for higher regulated countries and simplifying installations for OEMs.
The 3516E offers unsurpassed performance and durability in a wide array of industries and applications, including shredders, chippers, grinders, bore and drill rigs, and pumps as well as other applications in forestry, general industrial, material handling, and mining.
Power Rating
- Maximum Power - 2100HP
- Maximum Torque - 8275lb-ft @ 1200 rpm
- Rated Speed - 1650 rpm
- Minimum Power - 2100HP
Emission Standards
- Emissions - U.S. EPA Tier 4 Final, EU Stage V
General
- Engine Configuration - V-16
- Bore - 6.7in
- Stroke - 8.5in
- Displacement - 4760in³
- Compression Ratio - 16.5:1
- Aspiration - Turbocharged Aftercooled (TTA)
- Combustion System - MEUI
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - SCR
Engine Dimensions - Approximate
- Length - 122.2in
- Width - 63.6in
- Height - 83in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 18025lb
Aftertreatment Dimensions
- Length - 92.5in
- Width - 79.1in
- Height - 31.9in
- Weight - 2378lb
Standard Equipment:
-
- Air Inlet System
-
- Four turbochargers, centre mounted
- Air-to-Air Aftercooled (ATAAC)
-
- Control System
-
- Electronic engine control
-
- Exhaust System
-
- Two exhaust outlets, 203 mm (8 in) round flange
- Exhaust manifold, dry
- Four turbochargers with watercooled bearings
-
- Cooling System
-
- Gear-driven centrifugal jacket water pump
- Connections for radiator cooling
- Thermostats and housing
-
- Flywheels And Flywheel Housing
-
- Flywheel housing, SAE No. 0 or SAE No. 00
- Flywheel, SAE No. 18 or SAE No. 21
- SAE standard rotation
-
- Fuel System
-
- Fuel filter, LH spin-on type
- Fuel transfer pump
- Electronically controlled unit injectors
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler and dipstick, LH
- Oil pump
- Oil filter, LH, spin-on type
- Front sump oil pan, 500-hour change interval
-
- General
-
- Paint: Caterpillar yellow, with optional colors available at request
- Vibration damper
- Lifting eyes
