Cat® 3516C Industrial Power Unit
Product description
The Cat® 3516C Industrial Power Unit is offered at 1566 bkW (2100 bhp) @ 1750 rpm and is U.S. EPA Tier 2 Nonroad Equivalent. Conveniently pre-configured for a wide range of applications, the 3516C Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.
Power Rating
- Maximum Power - 2100HP
- Rated Speed - 1750 rpm
- Minimum Power - 2100HP
Emission Standards
- Emissions - U.S. EPA Tier 2 Nonroad equivalent emission standards (not currently EPA certified)
General
- Engine Configuration - V-16, 4-Stroke-Cycle Diesel
- Bore - 6.7in
- Stroke - 8.5in
- Displacement - 4760in³
- Compression Ratio - 13.0:1
- Aspiration - Turbocharged Aftercooled
- Rotation from Flywheel End - Counterclockwise
- Aftertreatment - -
Engine Dimensions - Approximate
- Length - 129in
- Width - 60in
- Height - 81in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 17284lb
Standard Equipment:
-
- Air Inlet System
-
- Aftercooler core, corrosion resistant coated (air side)
- Air cleaner. Regular duty, dry, panel type with service indicators, turbocharger, jacket water aftercooled.
- Turbocharger, rear mounted
- Jacket water aftercooled
-
- Control System
-
- Governor, RH, 3161 with self contained synthetic oil sump
- Air-fuel ratio control
- Mechanical speed control, without torque control
- Governor control
- Positive locking
-
- Cooling System
-
- Thermostats and housing
- Jacket water pump, centrifugal
-
- Exhaust System
-
- Exhaust manifold, dry
-
- Flywheels And Flywheel Housing
-
- SAE No. 00 flywheel
- 183 flywheel teeth
- SAE No. 00 flywheel housing
-
- Fuel System
-
- Fuel filter, with service indicators, cartridge type with RH service
- Fuel transfer pump
-
- Instrumentation
-
- Instrument Panel, RH
- Engine oil pressure gauge
- Fuel pressure gauge
- Oil filter differential gauge
- Jacket water temperature gauge
- Service meter, electric
- Tachometer
-
- Lube System
-
- Crankcase breather, top mounted
- Oil cooler
- Oil filler
- Oil dipstick
- Oil pump
- Oil filter, cartridge type with RH service
- Shallow oil pan
-
- Mounting System
-
- Rails, mounting, engine length, 254 mm (10 in), industrial-type, C-channel.
-
- Power Take Off
-
- Accessory drive, upper RH
- Front housing, single sided
-
- Protection System
-
- Junction box
- Manual shutoff, RH
- Safety shutoff protection, energized to shutdown
- Low oil pressure, low idle 69 kPa (10 psi); high idle 207 kPa (30 psi)
- Water temperature
- Overspeed
- 3161 governor solenoid energized to shutdown
-
- Starting System
-
- Starting switch
-
- General
-
- Vibration damper
- Lifting eyes
- Paint: Caterpillar yellow, with optional colors available at request