C280-16 Generator Set (Medium Speed)
Product description
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
- Maximum Rating - 4840 ekW (60Hz), 6500 kVA (50Hz)
- Minimum Rating - 4400 ekW (60Hz), 5875 kVA (50Hz)
- Emissions/Fuel Strategy - EPA Tier 4 Final, IMO Tier 2
- Frequency - 50 / 60 Hz
- Speed - 900 / 1000 rpm
- Duty Cycle - Prime, Continuous
Engine Specifications
- Engine Model - C280-16, V-16,4-Stroke Water-Cooled Diesel
- Bore - 11in
- Stroke - 11.8in
- Displacement - 18032in³
- Compression Ratio - 13:01
- Aspiration - TA
- Fuel System - Direct unit injection
- Governor Type - Generator Set Monitoring System (GMS)
Generator Set Dimensions
- Length - Maximum - 404in
- Width - Maximum - 99.62in
- Height - Maximum - 156.6in
- Dry Weight - Genset (maximum) - 141840lb
Standard Equipment:
-
- Air Inlet System
-
- Air inlet shutoff
- Turbocharger, watercooled, engine oil lubricated
- Breather, crankcase, top-mounted
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air cleaner
-
- Cooling System
-
- Three-bundle oil cooler
- Jacket water thermostats
- Front Mounted turbos
- Engine coolant water drains
- Water temperature regulator
-
- Exhaust System
-
- Dry, gas tight, exhaust manifold
- 457 mm (18 in) Cat bolt pattern
- Includes adapter, flexible exhaust fitting
-
- Fuel System
-
- Simplex or duplex
-
- Generator System
-
- Custom generator per generator data sheet completed by dealer
-
- Governor System
-
- UG Actuator
-
- Lube System
-
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Centrifugal oil filters with single shutoff
- Oil filler and dipstick
- Service Side Engine mounted on Cylinder Block Inspection Covers
- Crankcase explosion relief valves
- Oil pressure regulating valve
-
- Mounting System
-
- Damper, torsional vibration
- Engine and generator mounting
-
- Starting / Charging System
-
- Line group for single point custom connection
- Two Motors, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
-
- General:
-
- Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment:
-
- Air Inlet System
-
- Air inlet adapter
- Vertical support bracket
- Air cleaner louver assembly
- Boost control valve
- Soot filter
- Heavy duty air cleaner
-
- Cooling System
-
- Auxiliary water pump
- Heat exchanger for single circuit
- Expansion tank
- Cooling system aids
- Heating aids
-
- Exhaust System
-
- Flexible exhaust Fittings
- Weld flange and related hardware
-
- Fuel System
-
- Duplex primary fuel strainer
- Fuel system connections
- Fuel priming pump
-
- Generator System
-
- Winding temperature detectors
- Anti-condensation space heaters
- 3 Phase, Six Leads, WYE
- Class F insulation
- Busbar connections
-
- Governor System
-
- Electronic/actuators
- EGB actuator
- Digital programmers
- Battery backup/power supply
- 230 UA
- 723 Plus
-
- Lube System
-
- Oil pan drain valve
- Lube ANSI Adapter (Emergency connection)
-
- Mounting System
-
- Spring type vibration isolators
- Vertically Restrained
- Non-vertically Restrained
- Isolator
-
- Starting / Charging System
-
- Compressed air flex hose
- Turbine type air starters
- Pressure reducing valve
- Redundant air starters
-
- General:
-
- Custom paint colors
