3516B (50 Hz) Generator Set
Product description
Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.
Generator Set Specifications
- Standby Rating - 2500 kVA
- Prime Power Rating - 2275 kVA
- Emissions/Fuel Strategy - Low Fuel, Low Emissions
- Voltage - 380 to 11000 Volts
- Frequency - 50 Hz
- Speed - 1500 rpm
- Duty Cycle - Standby, Mission Critical, Prime, Continuous
- Maximum Rating - 2500 kVA
- Minimum Rating - 2000 kVA
Engine Specifications
- Engine Model - 3516B TA, V-16, 4-Stroke Water-Cooled Diesel
- Bore - 6.69in
- Stroke - 8.46in
- Displacement - 4764.73in
- Compression Ratio - 15.5:1
- Aspiration - TA
- Fuel System - Electronic unit injection
- Governor Type - Adem™3
Generator Set Dimensions
- Length - Minimum - 233.4in
- Length - Maximum - 251.7in
- Width - Maximum - 90in
- Height - Maximum - 93.2in
- Dry Weight - Genset (minimum) - 31900lb
- Dry Weight - Genset (maximum) - 40320lb
Standard Equipment:
-
- Air Inlet
-
- Air cleaner
-
- Cooling
-
- Package mounted radiator
-
- Exhaust
-
- Exhaust flange outlet
-
- Fuel
-
- Secondary fuel filters
- Fuel priming pump
- Primary fuel filter with integral water separator
-
- Generator
-
- Matched to the performance and output characteristics of Cat engines
- IP23 Protection
-
- Power Termination
-
- Busbar
-
- Control Panel
-
- EMCP 4.2B
-
- General
-
- Paint - Caterpillar yellow except rails and radiators gloss black
Optional Equipment:
-
- Exhaust
-
- Exhaust mufflers (except Tier 4)
-
- Generator
-
- Permanent magnet excitation (PMG)
- Internal excitation (IE)
- Anti-condensation heater
- Oversize and premium generators
-
- Power Termination
-
- Circuit breakers, UL listed
- Circuit breakers, IEC compliant
-
- Control Panels
-
- Generator temperature monitoring & protection
- Digital I/O module
- Load share module
- EMCP 4.3, EMCP 4.4
- Remote monitoring software
-
- Mounting
-
- Spring type vibration isolators
- IBC isolators
- Rubber anti-vibration mounts
-
- Starting/charging
-
- Oversize batteries
- Charging alternator
- Heavy duty starting system
- Jacket water heater
- Air starting motor with control and silencer
- Battery chargers
-
- General
-
- Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
- EU Certificate of Conformance (CE)
- The following options are based on regional and product configuration:
- Enclosures: Sound attenuated, weather protective
- Automatic transfer switches (ATS)
- UL 2200 package
- Integral & sub-base UL listed dual wall fuel tanks
- Integral & sub-base fuel tanks
- EEC Declaration of Conformity
- CSA Certification