PM313 Wheel Undercarriage Cold Planer

Product description

The PM313 is an efficient, highly maneuverable milling machine with a cutting width of 1300 mm (51.2 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.

Cutting System
  • Milling Width - 51.2in
  • Maximum Milling Depth - 13in
  • Rotor Speeds - 97 / 109 / 121 rpm
  • Number of Bits - 111
Power Train
  • Rated Power - 336.6HP
  • Engine - C9.3
  • Maximum Travel Speed - 4.7mile/h
  • Maximum Milling Speed - 108ft/min
Weights
  • Operating Weight - 47115lb
  • Transport Weight - 43561lb
Dimensions
  • Operating Length - Conveyor Up - 36.45ft
  • Operating Width - 8.33ft
  • Height - Canopy - 12.3ft
  • Maximum Truck Clearance - 15.42ft
  • Minimum Right Cutting Radius - 6.56ft
  • Minimum Left Cutting Radius - 13.88ft
  • Conveyor Swing - 60 degrees from center
  • Transport Length - 30.58ft
  • Transport Width - 8.33lb/in
  • Transport Height - 9.84ft
Service Refill Capacities
  • Hydraulic Tank - 15.6gal (US)
  • Cooling System - 16.4gal (US)
  • Water Spray System Tank - 332.9gal (US)
  • Diesel Exhaust Fluid (DEF) Tank - 5.8gal (US)
  • Engine Oil - 7.9gal (US)
  • Fuel Tank - 158.5gal (US)
Standard Equipment:
  • Operator Environment
    • Sliding operator station
    • Suspension seat
    • Ground control keypad
    • Single high-resolution LCD touchscreen display
    • 12-volt power receptacle
  • Cat Connect Technology
    • Remote Troubleshoot capability
    • Cat Product Link
    • Cat GRADE
  • Conveyor
    • Material removal boost feature
  • Rotor System
    • Automatic plunge-cut
    • Automatic transition feature
    • Obstacle jump
    • Three cutting speeds
    • System K Rotor - Standard (15 mm)
  • Powertrain
    • Auto engine idle control
    • High capacity cooling system
    • Automatic load control
    • Wheel undercarriage
  • Hydraulic System
    • Traction control
  • Service And Maintenance
    • Ports for Scheduled Oil Sampling (S·O·S℠)
    • Platform-level engine oil dipsticks
    • 1260 L (333 gal) onboard water tank
    • Side water fill valve
    • Water spray system
  • Safety And Security
    • Platform handrails
    • Signaling/warning horn
    • Halogen work lighting
Optional Equipment:
  • Operator Environment
    • Additional high-resolution LCD touchscreen display
    • Powered canopy
    • Windscreens
    • Remote camera with cut edge guidance
  • Cat Connect Technology
    • Sonic sensor (averaging or string line)
    • Ground level grade controls
  • Conveyor
    • Dust abatement system
    • Hydraulic folding conveyor
    • Remote camera (loading conveyor)
  • Rotor System
    • System K Rotor - Course (18 mm)
    • System K Rotor - Fine (8 mm)
    • Diamond bits
    • Pneumatic bit removal tool
    • Tool holder extractor
    • Rotor turning device
    • Ballast kit
  • Powertrain
    • Track undercarriage
    • CE certificate
  • Service And Maintenance
    • Air compressor
    • Accessory drive system
    • High pressure washdown
    • Low pressure washdown
    • Additional water spray system
    • Remote Flash
  • Safety And Security
    • LED work lighting (fixed, pole mounted, magnetic)
    • Warning beacon (fixed)
    • Truck signal lights
    • Roading Lights
    • Remote cameras (rear, front, cutting edges)
Compare Products