Compare Equipment Go Back
 PM622 Cold Planer |
 PM313 Track Undercarriage Cold Planer |
 PM820 Cold Planer |
|
Cutting System |
|||
|---|---|---|---|
| Milling Width | 88 in | 51.2 in | 79.1 in |
| Maximum Milling Depth | 13 in | 13 in | 13 in |
| Rotor Speeds | 100 / 109 / 118 rpm | 97 / 109 / 121 rpm | 100 / 109 / 118 rpm |
| Number of Bits | 185 | 111 | 178 |
Power Train |
|||
| Rated Power | 636 HP | 343 HP | 806 HP |
| Engine | Cat C18 | C9.3B | Cat C18 twin-turbo |
| Maximum Travel Speed | 3.7 mile/h | 3.4 mile/h | 3.7 mile/h |
| Maximum Milling Speed | 328 ft/min | 108 ft/min | 328 ft/min |
Weights |
|||
| Operating Weight | 74737 lb | 47522 lb | 79653 lb |
| Transport Weight | 66139 lb | 46622 lb | 71055 lb |
Dimensions |
|||
| Operating Length - Conveyor Up | 47.64 ft | 36.45 ft | 47.64 ft |
| Operating Width | 10.2 ft | 8.33 ft | 10.2 ft |
| Height - Canopy | 13.29 ft | 12.3 ft | 13.29 ft |
| Maximum Truck Clearance | 15.94 ft | 15.42 ft | 15.94 ft |
| Minimum Right Cutting Radius | 5.91 ft | 6.3 ft | 6.56 ft |
| Minimum Left Cutting Radius | 6.56 ft | 13.58 ft | 6.56 ft |
| Conveyor Swing | 60 degrees from center | 60 degrees from center | 60 degrees from center |
| Transport Length | 40.78 ft | 30.58 ft | 40.78 ft |
| Transport Width | 8.89 ft | 8.33 lb/in | 8.27 ft |
| Transport Height | 9.84 ft | 9.84 ft | 9.84 ft |
Service Refill Capacities |
|||
| Diesel Exhaust Fluid (DEF) Tank | 12.4 gal (US) | 12.4 gal (US) | - |
| Hydraulic Tank | 29.9 gal (US) | 14.5 gal (US) | 29.9 gal (US) |
| Cooling System | 22.5 gal (US) | 16.9 gal (US) | 27.5 gal (US) |
| Fuel Tank | 292.7 gal (US) | 137.9 gal (US) | 292.7 gal (US) |
| Engine Oil | 17.2 gal (US) | 7.9 gal (US) | 17.2 gal (US) |
| Water Spray System Tank | 898.2 gal (US) | 332.9 gal (US) | 898.2 gal (US) |
