Compare Equipment Go Back
745 Articulated Truck |
740 GC Bare Chassis Articulated Truck |
725 Bare Chassis Articulated Truck |
|
Engine |
|||
---|---|---|---|
Engine Model | Cat C18 | Cat® C15 | Cat® C9.3 |
Bore | 5.7 in | 5.4 in | 4.5 in |
Stroke | 7.2 in | 6.75 in | 45.2 in |
Displacement | 1106 in³ | 926 in³ | 567.5 in³ |
Net Power - SAE J1349 | 496 HP | 439 HP | 334 HP |
Gross Power - SAE J1995 | 511 HP | 452 HP | 342 HP |
Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final | Cat® C18 | - | - |
Net Power - ISO 14396 | 504 HP | 447 HP | 338 HP |
Note (4) | DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio | - | - |
Note (1) | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. | - | - |
No Engine De-rating Required Below | 10000 ft | 10000 ft | 3000 ft |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. | - | - |
Note (3) | Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. | - | - |
Peak Engine Torque Gross (SAE J1995) | 1931 ft·lbf | 1711 lb/ft | 1275 lb/ft |
Peak Engine Torque Speed | 1200 r/min | 1200 r/min | 1200 r/min |
Peak Engine Torque Net (SAE J1349) | 1887 ft·lbf | 1670 lb/ft | 1263 ft·lbf |
Emissions | The 745 meets Tier 4 Final and Stage V emission standards. | - | - |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final | - | Cat® C15 | - |
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV | - | - | Cat® C9.3 |
Weights |
|||
Rated Payload | 45.2 t | 49.2 ton (US) | 30.4 ton (US) |
Body Capacities |
|||
Heaped (SAE 2:1) | 32.7 yd³ | - | - |
Struck | 24.2 yd³ | - | - |
Tailgate Heaped SAE 2:1 | 34.7 yd³ | - | - |
Tailgate Struck | 25.5 yd³ | - | - |
Transmission |
|||
Forward - 1 | 3.8 mile/h | 4 mile/h | 5 mile/h |
Forward - 2 | 5 mile/h | 5.3 mile/h | 9.4 mile/h |
Forward - 3 | 7 mile/h | 7.3 mile/h | 14.4 mile/h |
Forward - 4 | 8.8 mile/h | 9.2 mile/h | 22.1 mile/h |
Forward - 5 | 11.6 mile/h | 12.2 mile/h | 30.7 mile/h |
Forward - 6 | 14.2 mile/h | 14.9 mile/h | 36.3 mile/h |
Forward - 7 | 19.6 mile/h | 20.6 mile/h | - |
Forward - 8 | 23.5 mile/h | 24.7 mile/h | - |
Reverse - 1 | 4 mile/h | 4.2 mile/h | 5.5 mile/h |
Reverse - 2 | 9.1 mile/h | 9.8 mile/h | - |
Forward - 9 | 34 mile/h | 35.7 mile/h | - |
Service Refill Capacities |
|||
Fuel Tank | 145.3 gal (US) | 143.5 gal (US) | 91 gal (US) |
Cooling System | 23.7 gal (US) | 23.7 gal (US) | 18 gal (US) |
Engine Crankcase | 13.7 gal (US) | 13.7 gal (US) | 8 gal (US) |
Steering/Hoist Hydraulic System | 36.9 gal (US) | 36.9 gal (US) | - |
Transmission - OTG | 19.8 gal (US) | 19.8 gal (US) | - |
DEF Tank | 5.3 gal (US) | 25 gal (US) | 4 gal (US) |
Final Drive - Each | 1.3 gal (US) | 1.3 gal (US) | 1.6 gal (US) |
Axles - Each | 15.8 gal (US) | 15.8 gal (US) | - |
Brake Cooling Tank | 17.69 gal (US) | 17.7 gal (US) | - |
Hydraulic System | - | - | 24 gal (US) |
Transmission | - | - | 10 gal (US) |
Output Transfer Gear Box | - | - | 5 gal (US) |
Final Drives/Differential | - | - | 33 gal (US) |
Sound Levels |
|||
Interior Cab | 72 dB(A) | 72 dB(A) | - |
Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the | - | - |
Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. | - | - |
Standards |
|||
Brakes | ISO 3450 – 2011 | ISO 3450:2011 | ISO 3450:2011 |
Cab - FOPS | ISO 3449 Level II – 2005 | ISO 3449:2005 Level II | ISO 3449:2005 Level II |
Cab - ROPS | ISO 3471 – 2008 | ISO 3471:2008 | ISO 3471:2008 |
Steering | ISO 5010 – 2007 | ISO 5010:2019 | ISO 5010:2019 |
Operating Weights |
|||
Rear Axle - Rated Load | 38691 lb | - | - |
Front Axle - Empty | 43515 lb | - | - |
Total - Loaded | 163942 lb | - | - |
Rear Axle - Empty | 14731 lb | - | - |
Rear Axle - Loaded | 53422 lb | - | - |
Total - Rated Load | 90390 lb | - | - |
Front Axle - Rated Load | 13007 lb | - | - |
Center Axle - Rated Load | 38691 lb | - | - |
Total - Empty | 73553 lb | - | - |
Front Axle - Loaded | 56522 lb | - | - |
Center Axle - Loaded | 54000 lb | - | - |
Center Axle - Empty | 15309 lb | - | - |
Body Plate |
|||
Type | High Strength Brinell HB450 Wear Resistant Steel | - | - |
Base | 0.55 in | - | - |
Chute | 0.55 in | - | - |
Side | 0.43 in | - | - |
Front | 0.28 in | - | - |
Body Hoist |
|||
Raise (automatic) | 13 s | - | - |
Raise (manual) | 12 s | - | - |
Lower (automatic) | 10 s | - | - |
Lower (manual) | 10 s | - | - |
Steering |
|||
Lock to Lock | 4.8 seconds @ 60 rpm | 4.75 seconds at 60 rpm | 4.75 seconds at 60 rpm |
Turning Circle |
|||
Turning Dimensions - Aisle Width | 233 in | 220 in | 210 in |
Turning Dimensions - Inside Radius | 174 in | 156 in | 153 in |
Turning Dimensions - Clearance Radius | 356 in | 330 in | 318 in |
Turning Dimensions - SAE Turning Radius | 340 in | 303 in | 294 in |
Note | Dimensions are for machines equipped with 29.5R25 tires. | Dimensions are for machines equipped with 29.5 R25 tires. | Dimensions are for machines equipped with 23.5R25 tires. |
Turning Dimensions - Steer Angle - Left/Right | 45 deg | 45° | 45 ° |
Optimal Loader/Truck Pass Matching |
|||
Hydraulic Excavator: 390 - Passes | 4 | - | - |
Wheel Loader: 982 - Passes | 4 | - | - |
Wheel Loader: 972 - Passes | 43926 | - | - |
Hydraulic Excavator: 374 - Passes | 5 | - | - |
Note | An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. | - | - |
Wheel Loader: 980 - Passes | 43926 | - | - |
Wheel Base Length |
|||
Standard Wheel Base | - | 162.4 in | 156.7 in |
Add a Similar Product: