|
|
|
735 Bare Chassis Articulated Truck
|
745 Bare Chassis Articulated Truck
|
Engine |
| Engine Model |
Cat® C15 |
Cat C18 |
Cat® C13 |
Cat® C18 |
| Gross Power - SAE J1995:2014 |
452 hp |
511 hp |
434 hp |
511 hp |
| Net Power - SAE J1349:2011 |
439 hp |
496 hp |
424 hp |
496 hp |
| Net Power - ISO 14396 |
447 hp |
504 hp |
447 hp |
447 hp |
| Bore |
5.4 in |
5.7 in |
5.1 in |
5.7 in |
| Stroke |
6.75 in |
7.2 in |
6.2 in |
7.2 in |
| Displacement |
926 in³ |
1106 in³ |
736 in³ |
1106 in³ |
| Note (1) |
The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
- |
- |
| Note (2) |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
- |
- |
| Note (3) |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. |
- |
- |
| Note (4) |
Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions. |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio |
- |
- |
| Note (5) |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
- |
- |
- |
| No Engine De-rating Below |
10000 ft |
- |
- |
- |
| Peak Engine Torque Gross (SAE J1995) |
1711 ft·lbf |
1931 ft·lbf |
1614 lb/ft |
1931 lb/ft |
| Peak Engine Torque Net (SAE J1349) |
1670 ft·lbf |
1887 ft·lbf |
1597 lb/ft |
1887 lb/ft |
| Peak Engine Torque Speed |
1200 r/min |
1200 r/min |
1200 r/min |
1200 r/min |
| Emissions |
- |
The 745 meets Tier 4 Final and Stage V emission standards. |
- |
- |
| No Engine De-rating Required Below |
- |
10000 ft |
12500 ft |
10000 ft |
| Engine Model - U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final)/Korea Tier 4 Final |
- |
- |
Cat® C13 |
Cat® C18 |
Weights |
| Rated Payload |
40 ton (US) |
45.2 t |
43.1 ton (US) |
55 ton (US) |
Body Capacities |
| Heaped (SAE 2:1) |
29.7 yd³ |
33.4 yd³ |
- |
- |
| Struck |
23.2 yd³ |
26 yd³ |
- |
- |
| Tailgate Heaped SAE 2:1 |
32 yd³ |
35.7 yd³ |
- |
- |
| Tailgate Struck |
24.4 yd³ |
25.5 yd³ |
- |
- |
Transmission |
| Forward - 1 |
4 mile/h |
3.8 mile/h |
5 mile/h |
3.8 mile/h |
| Forward - 2 |
5.3 mile/h |
5 mile/h |
9 mile/h |
5 mile/h |
| Forward - 3 |
7.3 mile/h |
7 mile/h |
14 mile/h |
7 mile/h |
| Forward - 4 |
9.2 mile/h |
8.8 mile/h |
22 mile/h |
8.8 mile/h |
| Forward - 5 |
12.2 mile/h |
11.6 mile/h |
30 mile/h |
11.6 mile/h |
| Forward - 6 |
14.9 mile/h |
14.2 mile/h |
35 mile/h |
14.2 mile/h |
| Forward - 7 |
20.6 mile/h |
19.6 mile/h |
- |
19.6 mile/h |
| Forward - 8 |
24.7 mile/h |
23.5 mile/h |
- |
23.5 mile/h |
| Forward - 9 |
35.7 mile/h |
34 mile/h |
- |
34 mile/h |
| Reverse - 1 |
4.2 mile/h |
4 mile/h |
6 mile/h |
4 mile/h |
| Reverse - 2 |
9.8 mile/h |
9.1 mile/h |
- |
9.1 mile/h |
Sound Levels |
| Interior Cab |
72 dB(A) |
72 dB(A) |
72 dB(A) |
72 dB(A) |
| Note (1) |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the |
- |
- |
| Note (2) |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
- |
- |
Operating Weights |
| Front Axle - Empty |
43200 lb |
42285 lb |
- |
- |
| Center Axle - Empty |
14804 lb |
15653 lb |
- |
- |
| Rear Axle - Empty |
14562 lb |
15653 lb |
- |
- |
| Total - Empty |
72565 lb |
72995 lb |
- |
- |
| Front Axle - Rated Load |
7002 lb |
12963 lb |
- |
- |
| Center Axle - Rated Load |
36513 lb |
38713 lb |
- |
- |
| Rear Axle - Rated Load |
36513 lb |
38713 lb |
- |
- |
| Total - Rated Load |
80027 lb |
90389 lb |
- |
- |
| Front Axle - Loaded |
50201 lb |
55248 lb |
- |
- |
| Center Axle - Loaded |
51317 lb |
54366 lb |
- |
- |
| Rear Axle - Loaded |
51074 lb |
53771 lb |
- |
- |
| Total - Loaded |
152593 lb |
163385 lb |
- |
- |
Body Plate |
| Type |
High strength Brinell HB450 wear resistant steel |
High Strength Brinell HB450 Wear Resistant Steel |
- |
- |
| Front |
- |
0.28 in |
- |
- |
| Chute |
- |
0.55 in |
- |
- |
| Side |
- |
0.43 in |
- |
- |
| Base |
- |
0.55 in |
- |
- |
Body Plate Thickness |
| Front Plate |
0.28 in |
- |
- |
- |
| Base Plate |
0.51 in |
- |
- |
- |
| Side Plates |
0.43 in |
- |
- |
- |
Service Refill Capacities |
| Fuel Tank |
145.3 gal (US) |
145.3 gal (US) |
108.8 gal (US) |
145.3 gal (US) |
| Cooling System |
23.7 gal (US) |
23.7 gal (US) |
21.9 gal (US) |
23.7 gal (US) |
| Brake Cooling Tank |
17.7 gal (US) |
17.69 gal (US) |
- |
17.7 gal (US) |
| Steering/Hoist Hydraulic System |
36.9 gal (US) |
36.9 gal (US) |
- |
36.9 gal (US) |
| Engine Crankcase |
13.7 gal (US) |
13.7 gal (US) |
10 gal (US) |
13.7 gal (US) |
| Transmission - OTG |
19.8 gal (US) |
19.8 gal (US) |
- |
19.8 gal (US) |
| Final Drive - Each |
1.3 gal (US) |
1.3 gal (US) |
- |
1.3 gal (US) |
| Axles - Each |
15.8 gal (US) |
15.8 gal (US) |
- |
15.8 gal (US) |
| DEF Tank |
6.5 gal (US) |
5.3 gal (US) |
5.3 gal (US) |
5.3 gal (US) |
| Hydraulic System |
- |
- |
29.1 gal (US) |
- |
| Transmission |
- |
- |
12.3 gal (US) |
- |
| Final Drives/Differential |
- |
- |
33 gal (US) |
33 gal (US) |
| Output Transfer Gear Box |
- |
- |
5.5 gal (US) |
- |
Body Hoist |
| Raise Time |
12 s |
- |
- |
- |
| Lower Time |
12 s |
- |
- |
- |
| Raise (manual) |
- |
12 s |
- |
- |
| Raise (automatic) |
- |
13 s |
- |
- |
| Lower (manual) |
- |
10 s |
- |
- |
| Lower (automatic) |
- |
10 s |
- |
- |
Standards |
| Brakes |
ISO 3450 – 2011 |
ISO 3450 – 2011 |
ISO 3450:2011 |
ISO 3450:2011 |
| Cab - FOPS |
ISO 3449 Level II – 2005 |
ISO 3449 Level II – 2005 |
ISO 3449:2005 Level II |
ISO 3449:2005 Level II |
| Cab - ROPS |
ISO 3471 – 2008 |
ISO 3471 – 2008 |
ISO 3471:2008 |
ISO 3471:2008 |
| Steering |
ISO 5010 – 2007 |
ISO 5010 – 2019 |
ISO 5010:2019 |
ISO 5010:2019 |
Turning Circle |
| Turning Dimensions - Steer Angle - Left/Right |
45° |
45 deg |
45° |
45° |
| Turning Dimensions - SAE Turning Radius |
303 in |
340 in |
294 in |
340 in |
| Turning Dimensions - Clearance Radius |
330 in |
356 in |
318 in |
356 in |
| Turning Dimensions - Inside Radius |
156 in |
174 in |
149 in |
174 in |
| Turning Dimensions - Aisle Width |
220 in |
233 in |
212 in |
233 in |
| Note |
Dimensions are for machines equipped with 29.5 R25 tires. |
Dimensions are for machines equipped with 29.5R25 tires. |
Dimensions are for machines equipped with 750/65 R25 tires. |
Dimensions are for machines equipped with 29.5 R25 tires. |
Steering |
| Lock to Lock |
4.75 seconds @ 60 rpm |
4.8 seconds @ 60 rpm |
4.75 seconds at 60 rpm |
4.8 seconds at 60 rpm |
Optimal Loader/Truck Pass Matching |
| Hydraulic Excavator: 374 - Passes |
3-4 |
5 |
- |
- |
| Hydraulic Excavator: 352F - Passes |
5–6 |
- |
- |
- |
| Wheel Loader: 972 - Passes |
3 |
4-5 |
- |
- |
| Wheel Loader: 966M - Passes |
4–5 |
- |
- |
- |
| Wheel Loader: 962M - Passes |
5 |
- |
- |
- |
| Note |
An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374 and 352 Hydraulic Excavators; and Cat 972, 966, and 962 Wheel Loaders. Having matched loading and hauling tools results in increased product |
An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
- |
- |
| Hydraulic Excavator: 390 - Passes |
- |
4 |
- |
- |
| Wheel Loader: 982 - Passes |
- |
4 |
- |
- |
| Wheel Loader: 980 - Passes |
- |
4-5 |
- |
- |
Wheel Base Length |
| Standard Wheel Base |
- |
- |
156.7 in |
180.7 in |
| Long Wheel Base |
- |
- |
215.2 in |
228.4 in |
