Compare Equipment Go Back

740 GC Articulated Truck

Engine

Engine Model Cat® C15 - -
Bore 5.4 in - -
Stroke 6.75 in - -
Displacement 926 in³ - -
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat C15 - -
Gross Power - SAE J1995 452 HP - -
Net Power - ISO 14396 447 HP - -
Peak Engine Torque Gross (SAE J1995) 1711 ft·lbf - -
Emissions The C15 engine meets Tier 4 Final and Stage V emission standards. - -
Note (4) Net power when the fan is at maximum speed is 327 kW (439 hp) per the SAE reference conditions. - -
Note (2) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. - -
Note (3) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. - -
Note (1) The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. - -
Note (5) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard ISO 22241-1. Requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. - -
No Engine De-rating Below 10000 ft - -
Peak Engine Torque Speed 1200 r/min - -
Peak Engine Torque Net (SAE J1349) 1670 ft·lbf - -
Net Power - SAE J1349 439 HP - -

Weights

Rated Payload 40 ton (US) - -

Body Capacities

Heaped (SAE 2:1) 29.7 yd³ - -
Struck 22.2 yd³ - -
Tailgate Heaped SAE 2:1 31.9 yd³ - -
Tailgate Struck 23.4 yd³ - -

Transmission

Forward - 1 4 mile/h - -
Forward - 2 5.3 mile/h - -
Forward - 3 7.3 mile/h - -
Forward - 4 9.2 mile/h - -
Forward - 5 12.2 mile/h - -
Forward - 6 14.9 mile/h - -
Reverse - 1 4.2 mile/h - -
Reverse - 2 9.8 mile/h - -
Forward - 8 24.7 mile/h - -
Forward - 7 20.6 mile/h - -
Forward - 9 35.7 mile/h - -

Service Refill Capacities

Fuel Tank 145.3 gal (US) - -
Cooling System 23.7 gal (US) - -
Engine Crankcase 13.7 gal (US) - -
Axles - Each 15.8 gal (US) - -
Brake Cooling Tank 17.7 gal (US) - -
Transmission - OTG 19.8 gal (US) - -
DEF Tank 6.5 gal (US) - -
Steering/Hoist Hydraulic System 36.9 gal (US) - -
Final Drive - Each 1.3 gal (US) - -

Sound Levels

Interior Cab 72 dB(A) - -
Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. - -
Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the - -

Body Hoist

Raise Time 12 s - -
Lower Time 12 s - -

Standards

Brakes ISO 3450 – 2011 - -
Cab - FOPS ISO 3449 Level II – 2005 - -
Cab - ROPS ISO 3471 – 2008 - -
Steering ISO 5010 – 2007 - -

Operating Weights

Center Axle - Empty 14636 lb - -
Rear Axle - Empty 14145 lb - -
Center Axle - Rated Load 37670 lb - -
Front Axle - Empty 42596 lb - -
Total - Empty 71377 lb - -
Center Axle - Loaded 51088 lb - -
Front Axle - Loaded 49723 lb - -
Total - Rated Load 80027 lb - -
Rear Axle - Rated Load 37670 lb - -
Rear Axle - Loaded 50594 lb - -
Front Axle - Rated Load 4687 lb - -
Total - Loaded 151405 lb - -

Steering

Lock to Lock 4.75 seconds @ 60 rpm - -

Body Plate

Type High strength Brinell HB450 wear resistant steel - -

Turning Circle

Turning Dimensions - SAE Turning Radius 303 in - -
Turning Dimensions - Clearance Radius 330 in - -
Turning Dimensions - Aisle Width 220 in - -
Note Dimensions are for machines equipped with 29.5 R25 tires. - -
Turning Dimensions - Steer Angle - Left/Right 45° - -
Turning Dimensions - Inside Radius 156 in - -

Body Plate Thickness

Side Plates 0.43 in - -
Base Plate 0.51 in - -
Front Plate 0.28 in - -

Optimal Loader/Truck Pass Matching

Note An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased pr - -
Wheel Loader: 972M - Passes 3 - -
Wheel Loader: 962M - Passes 5 - -
Wheel Loader: 966M - Passes 4–5 - -
Hydraulic Excavator: 374F - Passes 3–4 - -
Hydraulic Excavator: 352F - Passes 5–6 - -
Add a Similar Product:
  • 745 Articulated Truck Add
  • 740 EJ Articulated Truck Add
  • 730 Articulated Truck Add
  • 730 EJ Articulated Truck Add
  • 735 Articulated Truck Add
  • 745 Bare Chassis Articulated Truck Add
  • 725 Articulated Truck Add
  • 735 Bare Chassis Articulated Truck Add
  • 740 GC Bare Chassis Articulated Truck Add
  • 730 Bare Chassis Articulated Truck Add