CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    740 EJ Articulated Truck
    View Product
    730 EJ Articulated Truck
    View Product Remove

    Engine
    Engine Model Cat® C18 Cat® C13 -
    Bore 5.7 in 5.1 in -
    Stroke 7.2 in 6.2 in -
    Displacement 1106 in³ 763 in³ -
    Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final Cat C18 - -
    Gross Power - SAE J1995 511 HP 375 HP -
    Net Power - ISO 14396 504 HP 370 HP -
    Peak Engine Torque Net (SAE J1349) 1887 ft·lbf - -
    No Engine De-rating Required Below 10000 ft - -
    Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions. -
    Peak Engine Torque Gross (SAE J1995) 1931 ft·lbf 1579 ft·lbf -
    Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. The references to Tier 4 Final/Stage V include U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards. -
    Peak Engine Torque Speed 1200 r/min 1200 r/min -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard. -
    Note (3) Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. -
    Emissions The 740 EJ meets Tier 4 Final and Stage V emission standards. The 730 EJ meets Tier 4 Final and Stage V emission standards. -
    Net Power - SAE J1349 496 HP 367 HP -
    Note (5) - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio -
    Peak Engine Torque Net (ISO 14396) - 1564 ft·lbf -
    No Engine De-rating Below - 12500 ft -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage V - Cat C13 -

    Weights
    Rated Payload 42 ton (US) 30 ton (US) -

    Body Capacities
    Heaped (SAE 2:1) 30.1 yd³ 22.1 yd³ -
    Struck 23.5 yd³ 17.7 yd³ -

    Transmission
    Forward - 1 3.8 mile/h 5 mile/h -
    Forward - 2 5 mile/h 9 mile/h -
    Forward - 3 7 mile/h 14 mile/h -
    Forward - 4 8.8 mile/h 21 mile/h -
    Forward - 5 11.6 mile/h 29 mile/h -
    Forward - 6 14.2 mile/h 34 mile/h -
    Forward - 7 19.6 mile/h - -
    Forward - 8 23.5 mile/h - -
    Reverse - 1 4 mile/h 6 mile/h -
    Reverse - 2 9.1 mile/h - -
    Forward - 9 34 mile/h - -

    Service Refill Capacities
    Fuel Tank 145.3 gal (US) 108.8 gal (US) -
    Cooling System 23.7 gal (US) 21.9 gal (US) -
    Engine Crankcase 13.7 gal (US) 10 gal (US) -
    Steering/Hoist Hydraulic System 36.9 gal (US) - -
    Transmission - OTG 19.8 gal (US) - -
    DEF Tank 5.3 gal (US) 5.3 gal (US) -
    Axles - Each 15.8 gal (US) - -
    Final Drive - Each 1.3 gal (US) - -
    Brake Cooling Tank 17.7 gal (US) - -
    Hydraulic System - 29.1 gal (US) -
    Transmission - 12.4 gal (US) -
    Final Drives/Differential - 33 gal (US) -
    Output Transfer Gear Box - 6.3 gal (US) -

    Sound Levels
    Interior Cab 72 dB(A) 72 dB(A) -
    Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the -
    Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. -

    Standards
    Brakes ISO 3450 – 2011 ISO 3450 – 2011 -
    Cab - FOPS ISO 3449 Level II – 2005 ISO 3449 Level II – 2005 -
    Cab - ROPS ISO 3471 – 2008 ISO 3471 – 2008 -
    Steering ISO 5010 – 2007 ISO 5010 – 2007 -

    Operating Weights
    Front Axle - Empty 44849 lb 34723 lb -
    Front Axle - Loaded 48548 lb 35009 lb -
    Center Axle - Loaded 57214 lb 41502 lb -
    Center Axle - Empty 17095 lb 12214 lb -
    Total - Empty 78623 lb 58643 lb -
    Rear Axle - Rated Load 40120 lb 29156 lb -
    Rear Axle - Empty 16515 lb 11707 lb -
    Front Axle - Rated Load 3534 lb 1433 lb -
    Center Axle - Rated Load 40120 lb 29156 lb -
    Total - Loaded 162399 lb 117528 lb -
    Total - Rated Load 83776 lb 59745 lb -
    Rear Axle - Loaded 56637 lb 41017 lb -

    Body Plate
    Type High Strength Brinell HB450 Wear Resistant Steel High strength Brinell HB450 wear resistant steel -
    Chute 0.55 in - -
    Front 0.28 in - -
    Side 0.43 in - -
    Base 0.55 in - -

    Steering
    Lock to Lock 4.8 seconds @ 60 rpm 4.75 seconds @ 60 rpm -

    Turning Circle
    Note Dimensions are for machines equipped with 29.5R25 tires. Dimensions are for machines equipped with 750/65 R25 tires. -
    Turning Dimensions - Aisle Width 233 in 214 in -
    Turning Dimensions - Inside Radius 173 in 152 in -
    Turning Dimensions - Clearance Radius 356 in 318 in -
    Turning Dimensions - SAE Turning Radius 339 in 294 in -
    Turning Dimensions - Steer Angle - Left/Right 45 deg 45° -

    Blade Eject/Retract
    Retract (manual) 21 s - -
    Eject (manual) 17 s - -
    Eject (automatic) 16 s - -
    Retract (automatic) 21 s - -

    Optimal Loader/Truck Pass Matching
    Note An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increas -
    Wheel Loader: 972 - Passes 4–5 - -
    Wheel Loader: 982 - Passes 4 - -
    Hydraulic Excavator: 374 - Passes 5 - -
    Hydraulic Excavator: 390 - Passes 4 - -
    Wheel Loader: 980 - Passes 4–5 - -
    Hydraulic Excavators: 336F/336F XE - Passes - 5–6 -
    Hydraulic Excavators: 349F/349F XE - Passes - 4–5 -
    Wheel Loaders: 966M/966M XE - Passes - 4 -
    Wheel Loaders: 972M/972M XE - Passes - 3–4 -
    Wheel Loader: 962M - Passes - 4–5 -
    Wheel Loader: 950M - Passes - 5 -

    Eject/Retract Times
    Retract Time - 15 s -
    Eject Time - 12 s -
    Add a Similar Product:
    • 740 GC Articulated Truck Add
    • 745 Articulated Truck Add
    • 735 Articulated Truck Add
    • 730 Articulated Truck Add
    • 725 Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 730 Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 725 Bare Chassis Articulated Truck Add