CALL US: 800-937-2326   |   PARTS: 800-937-2311   |   LOCATIONS
  • Home
  • Compare

    • Compare Equipment Go Back

    740 EJ Articulated Truck
    View Product
    730 Bare Chassis Articulated Truck
    View Product Remove

    Engine
    Engine Model Cat® C18 Cat® C13 -
    Bore 5.7 in 5.1 in -
    Stroke 7.2 in 6.2 in -
    Displacement 1106 in³ 762.8 in³ -
    Engine Model - U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), Korea Tier 4 Final Cat C18 - -
    Gross Power - SAE J1995 511 HP 375 HP -
    Net Power - ISO 14396 504 HP 370 HP -
    Peak Engine Torque Net (SAE J1349) 1887 ft·lbf 1554 ft·lbf -
    No Engine De-rating Required Below 10000 ft 12500 ft -
    Note (4) DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio - -
    Peak Engine Torque Gross (SAE J1995) 1931 ft·lbf 1579 lb/ft -
    Note (1) The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. - -
    Peak Engine Torque Speed 1200 r/min 1200 r/min -
    Note (2) The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. - -
    Note (3) Net power when the fan is at maximum speed is 348 kW (467 hp) per the SAE reference conditions. - -
    Emissions The 740 EJ meets Tier 4 Final and Stage V emission standards. - -
    Net Power - SAE J1349 496 HP 367 HP -
    Engine Model - U.S. EPA Tier 4 Final/EU Stage IV - Cat® C13 -

    Weights
    Rated Payload 42 ton (US) 38.9 ton (US) -

    Body Capacities
    Heaped (SAE 2:1) 30.1 yd³ - -
    Struck 23.5 yd³ - -

    Transmission
    Forward - 1 3.8 mile/h 5 mile/h -
    Forward - 2 5 mile/h 9 mile/h -
    Forward - 3 7 mile/h 14 mile/h -
    Forward - 4 8.8 mile/h 21 mile/h -
    Forward - 5 11.6 mile/h 29 mile/h -
    Forward - 6 14.2 mile/h 34 mile/h -
    Forward - 7 19.6 mile/h - -
    Forward - 8 23.5 mile/h - -
    Reverse - 1 4 mile/h 6 mile/h -
    Reverse - 2 9.1 mile/h - -
    Forward - 9 34 mile/h - -

    Service Refill Capacities
    Fuel Tank 145.3 gal (US) 108.8 gal (US) -
    Cooling System 23.7 gal (US) 21.9 gal (US) -
    Engine Crankcase 13.7 gal (US) 10 gal (US) -
    Steering/Hoist Hydraulic System 36.9 gal (US) - -
    Transmission - OTG 19.8 gal (US) - -
    DEF Tank 5.3 gal (US) 5.3 gal (US) -
    Axles - Each 15.8 gal (US) - -
    Final Drive - Each 1.3 gal (US) - -
    Brake Cooling Tank 17.7 gal (US) - -
    Hydraulic System - 29.1 gal (US) -
    Transmission - 12.4 gal (US) -
    Final Drives/Differential - 33 gal (US) -
    Output Transfer Gear Box - 6.3 gal (US) -

    Sound Levels
    Interior Cab 72 dB(A) 72 dB(A) -
    Note (1) The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the - -
    Note (2) Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. - -

    Standards
    Brakes ISO 3450 – 2011 ISO 3450:2011 -
    Cab - FOPS ISO 3449 Level II – 2005 ISO 3449:2005 Level II -
    Cab - ROPS ISO 3471 – 2008 ISO 3471:2008 -
    Steering ISO 5010 – 2007 ISO 5010:2019 -

    Operating Weights
    Front Axle - Empty 44849 lb - -
    Front Axle - Loaded 48548 lb - -
    Center Axle - Loaded 57214 lb - -
    Center Axle - Empty 17095 lb - -
    Total - Empty 78623 lb - -
    Rear Axle - Rated Load 40120 lb - -
    Rear Axle - Empty 16515 lb - -
    Front Axle - Rated Load 3534 lb - -
    Center Axle - Rated Load 40120 lb - -
    Total - Loaded 162399 lb - -
    Total - Rated Load 83776 lb - -
    Rear Axle - Loaded 56637 lb - -

    Body Plate
    Type High Strength Brinell HB450 Wear Resistant Steel - -
    Chute 0.55 in - -
    Front 0.28 in - -
    Side 0.43 in - -
    Base 0.55 in - -

    Steering
    Lock to Lock 4.8 seconds @ 60 rpm 4.75 seconds @ 60 rpm -

    Turning Circle
    Note Dimensions are for machines equipped with 29.5R25 tires. Dimensions are for machines equipped with 23.5 R25 tires. -
    Turning Dimensions - Aisle Width 233 in 210 in -
    Turning Dimensions - Inside Radius 173 in 153 in -
    Turning Dimensions - Clearance Radius 356 in 318 in -
    Turning Dimensions - SAE Turning Radius 339 in 294 in -
    Turning Dimensions - Steer Angle - Left/Right 45 deg 45 ° -

    Blade Eject/Retract
    Retract (manual) 21 s - -
    Eject (manual) 17 s - -
    Eject (automatic) 16 s - -
    Retract (automatic) 21 s - -

    Optimal Loader/Truck Pass Matching
    Note An optimum system match gives you a major productivity advantage. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. - -
    Wheel Loader: 972 - Passes 4–5 - -
    Wheel Loader: 982 - Passes 4 - -
    Hydraulic Excavator: 374 - Passes 5 - -
    Hydraulic Excavator: 390 - Passes 4 - -
    Wheel Loader: 980 - Passes 4–5 - -

    Wheel Base Length
    Standard Wheel Base - 156.7 in -
    Long Wheel Base - 215.2 in -
    Add a Similar Product:
    • 740 GC Articulated Truck Add
    • 745 Articulated Truck Add
    • 735 Articulated Truck Add
    • 730 Articulated Truck Add
    • 730 EJ Articulated Truck Add
    • 725 Articulated Truck Add
    • 745 Bare Chassis Articulated Truck Add
    • 740 GC Bare Chassis Articulated Truck Add
    • 735 Bare Chassis Articulated Truck Add
    • 725 Bare Chassis Articulated Truck Add